欢迎来到科学材料站!
首页 > 冷冻干燥机 > 实验室台式标准型冷冻干燥机 > 实验室台式标准型冷冻干燥机(B系列)

实验室台式标准型冷冻干燥机(B系列)

  • 产品代码:30050002 30050003 30050004 30050005 30050006 30050007 30050008 30050009
  • 产品描述:Laboratory Benchtop Standard Freeze Dryer (Series B)
  • 品牌:SCI Materials Hub
  • 货期:请咨询
  • 浏览次数:
  • 咨询电话:+86 130-0303-8751
  • 关键词:实验室台式标准型冷冻干燥机(B系列), Laboratory Benchtop Standard Freeze Dryer (Series B), 科学材料站, SCI Materials Hub
65.7K

1、DGJ02实验室台式标准型冷冻干燥机(B系列,850 W ,0.12 m2/-55 ℃

冷阱温度为-50℃,配置丰富,操作简便,具有紧凑的结构和灵活的组合方式,主机可与不同的干燥装置进行组合,以适应不同产品的冻干,例如:选用不锈钢盘可冻干散装物料,与带压盖装置的有机玻璃干燥室组合可冻干西林瓶,与带挂瓶的有机玻璃干燥室组合可冻干在烧瓶内的样品,与T型架附件组合可冻干安瓿,用于菌种保藏工作。


DGJ02主要特点

★ 干燥仓一体成型。无粘接、高强度,无泄漏。

★ 体积小、重量轻,适合各类实验室使用。

★ 采用低温制冷及高真空技术,适合各种冻干材料。

★ 国际品牌压缩机,高效稳定、噪音低。

★ 冷阱预冻功能。

★ 强制导流技术,缩短干燥周期。

★ 特殊样品冷阱低温干燥功能。

★ 原装进口充气阀,可充氮气或者惰性气体进行干燥后的保存。

★ 采用国际品牌压缩机,高效稳定、噪音低。


2、DGJ03实验室台式标准型冷冻干燥机(B系列,850 W,0.12 m2/-55 ℃

该系列冻干机有五款基本配置:普通型、压塞型、多歧型管型、多歧管压塞型,T型多歧管型(24只)。


DGJ03主要特点

★ 干燥仓一体成型。无粘接、高强度,无泄漏。

★ 品牌压缩机,稳定、噪音低。

★ 冷阱预冻功能。

★ 样品温度监视,可实时监控样品温度。

★ 冻干曲线绘制功能,可查看、存储冻干曲线。

★ 冻干数据显示存储功能,支持U盘数据导出功能。最远监控距离1.5 KM(选配)。

★ 手机监控系统:可手机监控设备运行状况,简单便捷(选配)。

★ 氧含量监控系统:可监控冻干过程中氧气含量,对易氧化物质做有效保护(选配)。

★ 湿度监控系统:可监控冻干过程中水蒸气湿度含量,对冻干的进度进行有效的判断(选配)。

★ 冻干终点判定系统:可在解析干燥阶段结束后自动进行冻干终点测试,确保物质含水率到达标准要求(选配)。

★ 特殊样品冷阱低温干燥功能。

★ 原装进口充气阀,可充氮气或者惰性气体进行干燥后的保存。

★ 工业触摸屏(七寸触摸屏)+工业PLC,安全稳定。

★ U盘数据导出功能,可导出冻干数据,方便冻干过程分析。


3、DGJ04实验室台式标准型冷冻干燥机(B系列,900 W,0.12 m2/-55 ℃

该型号有五款基本配置:普通型、压塞型、多歧型管型、多歧管压塞型,T型多歧管型(24只)。


DGJ04主要特点

★ 干燥仓透明门采用航空亚克力材料,无粘结、高强度无泄漏。

★ 冷阱预冻功能。

★ 导流筒技术,提高冻干效率。

★ 制冷系统采用品牌压缩机,稳定、噪音低。

★ 真空系统采用日本品牌真空泵,抽速大、噪音小,质量稳定可靠。

★ 特殊样品冷阱低温干燥功能。

★ 可充氮气或者惰性气体进行干燥后的保存。

★ 采用工业触摸屏,人机互动型好,简单易懂,不需说明书也可进行简易操作。


4、DGJ05实验室台式标准型冷冻干燥机(B系列,900 W,0.12 m2/-55 ℃

该系列冻干机,干燥仓采用航空亚克力材料,无粘接、高强度,无泄漏。冷阱预冻功能。特殊样品冷阱低温干燥功能。可充氮气或者惰性气体进行干燥后的保存。


DGJ05主要特点

干燥仓透明门采用航空亚克力材料,无粘结、高强度无泄漏。

★ 冷阱预冻功能。

★ 采用品牌压缩机,稳定、噪音低。

★ 采用国外品牌真空泵,抽速大,质量稳定可靠。

★ 特殊样品冷阱低温干燥功能。

★ 可充氮气或者惰性气体进行干燥后的保存。

★ 采用工业触摸屏,人机互动型好,简单易懂,不需说明书也可进行简易操作。


5、DGJ06 (0.4 m2, -55 ) / DGJ07 (0.4 m2, -85 ) & DGJ08 (0.8 m2, -55 ) / DGJ09 (0.8 m2, -85 ℃) 实验室台式标准型冷冻干燥机(B系列,3000W)

该型号为无压塞标准装置,其对应的压塞型为:实验室立式手动压盖型冷冻干燥机(B系列,3000W)。


DGJ06/07 & DGJ08/09主要特点

★ 干燥仓采用航空亚克力材料,高强度、无泄漏。

★ 冷阱预冻功能。

★ 品牌压缩机,稳定、噪音低。

★ 特殊样品冷阱低温干燥功能。

★ 可充氮气或者惰性气体进行干燥后的保存。

★ 每层板层独立测温控温技术。

★ 实时显示真空度、冷阱温度。

★ 共晶点测试技术,可离线、在线测试制品的共晶点温度,可人工或自动分析图谱(选配)。

★ 远程控制系统:可远程控制设备,存储曲线及数据(选配)。

★ 手机监控系统:可手机监控设备,夜间无需人员值守(选配)。

★ 远程控制系统:可远程监控设备运行状况,最远监控距离1.5 KM(选配)。

★ 氧含量监控系统:可监控冻干过程中氧气含量,对易氧化物质做有效保护(选配)。

★ 湿度监控系统:可监控冻干过程中水蒸气湿度含量,对冻干的进度进行有效的判断(选配)。

★ 冻干终点判定系统:可在解析干燥阶段结束后自动进行冻干终点测试,确保物质含水率到达标准要求(选配)。

型号
DGJ02DGJ03DGJ04DGJ05DGJ06DGJ07DGJ08DGJ09
样品盘Φ200 mm*4Φ200 mm*4Φ200 mm*4Φ200 mm*4/
/
/
/
冷阱尺寸Φ220*130 mmΦ220*130 mm//////
冻干面积0.12 m20.12 m20.12 m20.12 m20.4 m20.4 m20.8 m20.8 m2
冷阱温度
-55 -55 ℃-55 ℃-55 ℃-55 ℃-85 ℃-55 ℃-85 ℃
真空度<9 Pa<6 Pa<6 Pa<6 Pa<6 Pa<1 Pa<6 Pa<1 Pa
捕水能力3 L3 L3 L3 L10 L10 L10 L10 L
冻干效率2 L/24 h2 L/24 h2 L/24h2 L/24h6 L/24h6 L/24h6 L/24h6 L/24h
压缩机功率7/8 HP7/8 HP7/8 HP7/8 HP////
真空泵2 L/S2 L/S2 L/S2 L/S6 L/S6 L/S6 L/S6 L/S
功率850 W850 W900 W900 W3000 W3000 W3000 W3000 W

整机尺寸

350*600*345 mm350*600*345 mm470*600*400 mm470*600*400 mm////
图片


实验室冷冻干燥机(B系列)可选款型及特点

实验室冷冻干燥机(B系列)有五款基本配置:普通型、压塞型、多歧型管型、多歧管压塞型,T型多歧管型(24只)。

普通型:适合装载散装物料。

压塞型:适合装载西林瓶装物料。

多歧型管型:适合装载外挂瓶装物料。

多歧型管压塞型:适合装载散装物料、瓶装物料及外挂瓶装物料。

T型多歧型管型:适合装载外挂瓶及安瓿瓶装物料。

五款可冻干样品类型:水溶性溶液、悬浊液或糊状物质,其共晶点温度高于-20 ℃。


实验室冷冻干燥机(B系列)选配

共晶点测试仪样品温度监视器6/8层透明冻干仓6/8层外挂瓶冻干仓
冷阱内置冻干仓T16/24/52/104歧型管冻干仓安瓿瓶封口器西林瓶封盖器
进口真空泵油雾过滤器广口瓶装置真空泵防返油装置
进口真空油回填过滤器外挂冻干瓶西林瓶


1. 手机淘宝(官方淘宝店铺:科学材料站)


2. 点击进入淘宝网页链接

实验室台式标准型冷冻干燥机(B系列)

产品代码

产品描述

产品价格及规格库存状态
30050002DGJ02实验室台式标准型冷冻干燥机(B系列,850W)

¥19800

现货
30050003
DGJ03实验室台式标准型冷冻干燥机(B系列,850W)请询价请咨询
30050004DGJ04实验室台式标准型冷冻干燥机(B系列,900W)请询价请咨询
30050005DGJ05实验室台式标准型冷冻干燥机(B系列,900W)请询价请咨询
30050006DGJ06实验室台式标准型冷冻干燥机(B系列,3000W)请询价请咨询
30050007DGJ07实验室台式标准型冷冻干燥机(B系列,3000W)请询价请咨询
30050008DGJ08实验室台式标准型冷冻干燥机(B系列,3000W)请询价请咨询
30050009DGJ09实验室台式标准型冷冻干燥机(B系列,3000W)请询价请咨询
SCI Materials Hub is Committed to Offering The Best Price & Customer Services!


*大量需求请联系我们咨询更多折扣

**可提供13%增值税专用发票


3. 其它联系方式

电话:+86 130-0303-8751/+86 156-0553-2352

微信:SCI-Materials-Hub

如需报价单请联系:Email: contact@scimaterials.cn



Partial references citing our materials (from Google Scholar)

1.


二氧化碳还原

1. ACS Nano Strain Relaxation in Metal Alloy Catalysts Steers the Product Selectivity of Electrocatalytic CO2 Reduction

The bipolar membrane (Fumasep FBM) in this paper was purchased from SCI Materials Hub, which was used in rechargeable Zn-CO2 battery tests. The authors reported a strain relaxation strategy to determine lattice strains in bimetal MNi alloys (M = Pd, Ag, and Au) and realized an outstanding CO2-to-CO Faradaic efficiency of 96.6% with outstanding activity and durability toward a Zn-CO2 battery.


2. Front. Chem. Boosting Electrochemical Carbon Dioxide Reduction on Atomically Dispersed Nickel Catalyst

In this paper, Vulcan XC-72R was purchased from SCI Materials Hub. Vulcan XC 72R carbon is the most common catalyst support used in the anode and cathode electrodes of Polymer Electrolyte Membrane Fuel Cells (PEMFC), Direct Methanol Fuel Cells (DMFC), Alkaline Fuel Cells (AFC), Microbial Fuel Cells (MFC), Phosphoric Acid Fuel Cells (PAFC), and many more!


3. Adv. Mater. Partially Nitrided Ni Nanoclusters Achieve Energy-Efficient Electrocatalytic CO2 Reduction to CO at Ultralow Overpotential

An AEM membrane (Sustainion X37-50 Grade RT), purchased from SCI Materials Hub) was activated in 1 M KOH for 24 h, washed with ultra-purity water prior to use.


4. Adv. Funct. Mater. Nanoconfined Molecular Catalysts in Integrated Gas Diffusion Electrodes for High-Current-Density CO2 Electroreduction

In this paper (Supporting Information), an anion exchanged membrane (Fumasep FAB-PK-130 obtained from SCI Materials Hub (www.scimaterials.cn)) was used to separate the catholyte and anolyte chambers.

SCI Materials Hub: we also recommend our Fumasep FAB-PK-75 for the use in a flow cell.


5. Appl. Catal. B Efficient utilization of nickel single atoms for CO2 electroreduction by constructing 3D interconnected nitrogen-doped carbon tube network

In this paper, the Nafion 117 membrane was obtained from SCI Materials Hub.


6. Vacuum Modulable Cu(0)/Cu(I)/Cu(II) sites of Cu/C catalysts derived from MOF for highly selective CO2 electroreduction to hydrocarbons

In this paper, Proton exchange membrane (Nafion 117), Nafion D520, and Toray 060 carbon paper were purchased from SCI Materials Hub.


7. National Science Review Confinement of ionomer for electrocatalytic CO2 reduction reaction via efficient mass transfer pathways

An anion exchange membrane (PiperION-A15-HCO3) was obtained from SCI Materials Hub.


8. Catalysis Communications Facilitating CO2 electroreduction to C2H4 through facile regulating {100} & {111} grain boundary of Cu2O

Carbon paper (TGPH060), membrane solution (Nafion D520), and ionic membrane (Nafion N117) were obtained from Wuhu Eryi Material Technology Co., Ltd.

Note: Wuhu Eryi Material Technology Co. is a company hold by SCI Materials Hub.


9. Advanced Energy Materials Interatomic Electronegativity Offset Dictates Selectivity When Catalyzing the CO2 Reduction Reaction

The bipolar membrane (Fumasep FBM), carbon paper (SIGRACET 29BC, Freudenberg paper H23C2), ion exchange membrane (Nafion N117), and anion exchange membrane (Fumasep, FAA-3-PK-130) were all obtained from SCI Materials Hub.


10. Separation and Purification Technology *CO spillover induced by bimetallic xZnO@yCuO active centers for enhancing C–C coupling over electrochemical CO2 reduction

5 % Nafion solution was obtained through SCI Materials Hub.


11. National Science Review Confinement of ionomer for electrocatalytic CO2 reduction reaction via efficient mass transfer pathways

In this paper, PiperION-A5-HCO3 anion exchange resin, Fumion FAA anion exchange resin, PiperION-A15-HCO3 and FAA-3-50 were purchased from SCI Materials Hub.


12. Vacuum Controllable dual Cu–Cu2O sites derived from CuxAl-LDH for CO2 electroreduction to hydrocarbons

Nafion and carbon paper (TGPH060) were supplied through SCI Materials Hub.


13. Chemical Engineering Journal Coupling electrocatalytic CO2 reduction with glucose oxidation for concurrent production of formate with high efficiency

An AEM membrane (PiperION, purchased from SCI Materials Hub) was activated in 1 M KOH for 24 h, washed with ultra-purity water prior to use.


14. Chem Identification of Cu0/Cu+/Cu0 interface as superior active sites for CO2 electroreduction to C2+ in neutral condition

In this paper, Sustainion X37-50 Grade RT membrane and the MEA electrolyzer (CRRMEA1a, Figure S34) with 1cm2 active area were obtained from SCI Materials Hub.

微信公众号中文报道:Chem:基于热力学驱动的混合策略形成Cu0/Cu+/Cu0界面用于中性条件CO2电还原C2+


15. Surfaces and Interfaces Modulating surface microenvironment based on Ag-adorned CuO flower-liked nanospheres for strengthening C-‍C coupling during CO2RR

5 wt.% of Nafion solution, and N115 proton exchange membrane were procured with the help of SCI Materials Hub


16. ACS Appl. Energy Mater. Nanoporous Bismuth Induced by Surfactant-Modified Dealloying for Efficient Electrocatalytic Reduction of CO2 to Formic Acid

The anion exchange membrane (AEM, PiperION A20) and cation exchange membrane (CEM, Nafion 117) were obtained from SCI Materials Hub.


17. Adv. Energy Mater. Tailoring Microenvironments and In Situ Transformations of Cu Catalysts for Selective and Stable Electrosynthesis of Multicarbon Products

For GDE-based CO₂ electrolysis, the MEA reactor (CRRMEA5a, Sci-Materials Hub) consists of a titanium anode plate and a cathode plate with flow fields, along with insulating gaskets, integrated into a compression cell. The geometric area of each flow field is 5 cm² An anion exchange membrane (PiperION, A40-HCO3, Versogen) was used to separate the anode and the cathode.


18. Journal of Environmental Chemical Engineering Evaluation of electromethanogenesis in a microbial electrolysis cell using nylon cloth as a separator: reactor performance and metagenomic analysis

A commercial Nafion PEM (SCI Materials Hub) was used as the control to compare the electromethanogenesis performance.


19. Angew pH-Universal Electrocatalytic CO2 Reduction with Ampere-level Current Density on Doping-engineered Bismuth Sulfide

CRRMEA1a 1cm2 MEA electrolyzer (Figure 4d) was obtained from SCI Materials Hub.

微信公众号中文报道:安徽师范大学最新Angew!全pH范围内铋基催化剂用于安培级电流密度电催化CO2还原


20. Separation and Purification Technology Coupling regulation of boron doping and morphology in nano-floral CuO using one pot method for electrocatalytic CO2 reduction

Carbon paper (TGPH060), Dupont Nafion solution (D520), and proton exchange membrane (N117) were acquired by SCI Materials Hub.


21. Chemical Engineering Journal Manipulating dual effects of morphology and oxygen vacancies through the incorporation of CuO onto CeO2 nanospheres for electrochemical CO2 reduction

Carbon paper (TGPH060), Dupont Nafion solution (D520), and proton exchange membrane (N117) were acquired by SCI Materials Station Hub (SCI Materials Hub, the same author as Ref. 20).


22. Advanced Materials Universal Formation of Single Atoms from Molten Salt for Facilitating Selective CO2 Reduction

The Nafion D520 dispersion and gas diffusion electrode (GDE, Sigracet, 39BB) were obtained from SCI Materials Hub (www.scimaterials.cn).


23. Science Bulletin Compressive strain in Cu catalysts: Enhancing generation of C2+ products in electrochemical CO2 reduction

CRRMEA1a 1cm2 MEA electrolyzer (Figure 3a) was obtained from SCI Materials Hub.

微信公众号中文报道:Science Bulletin:优化水覆盖度促进安培级电流密度下CO2还原C2+


电池

1. J. Mater. Chem. A Blocking polysulfides with a Janus Fe3C/N-CNF@RGO electrode via physiochemical confinement and catalytic conversion for high-performance lithium–sulfur batteries

Graphene oxide (GO) in this paper was obtained from SCI Materials Hub. The authors introduced a Janus Fe3C/N-CNF@RGO electrode consisting of 1D Fe3C decorated N-doped carbon nanofibers (Fe3C/N-CNFs) side and 2D reduced graphene oxide (RGO) side as the free-standing carrier of Li2S6 catholyte to improve the overall electrochemical performance of Li-S batteries.


2. Joule A high-voltage and stable zinc-air battery enabled by dual-hydrophobic-induced proton shuttle shielding

This paper used more than 10 kinds of materials from SCI Materials Hub and the authors gave detailed properity comparsion.

The commercial IEMs of Fumasep FAB-PK-130 and Nafion N117 were obtained from SCI Materials Hub.

Gas diffusion layers of GDL340 (CeTech) and SGL39BC (Sigracet) and Nafion dispersion (Nafion D520) were obtained from SCI Materials Hub.

Zn foil (100 mm thickness) and Zn powder were obtained from the SCI Materials Hub.

Commercial 20% Pt/C, 40% Pt/C and IrO2 catalysts were also obtained from SCI Materials Hub.


3. Journal of Energy Chemistry Vanadium oxide nanospheres encapsulated in N-doped carbon nanofibers with morphology and defect dual-engineering toward advanced aqueous zinc-ion batteries

In this paper, carbon cloth (W0S1011) was obtained from SCI Materials Hub. The flexible carbon cloth matrix guaranteed the stabilization of the electrode and improved the conductivity of the cathode.


4. Energy Storage Materials Defect-abundant commercializable 3D carbon papers for fabricating composite Li anode with high loading and long life

The 3D carbon paper (TGPH060 raw paper) were purchased from SCI Materials Hub.


5. Nanomaterials A Stable Rechargeable Aqueous Zn–Air Battery Enabled by Heterogeneous MoS2 Cathode Catalysts

Nafion D520 (5 wt%), and carbon paper (GDL340) were received from SCI-Materials-Hub.


6. SSRN An Axially Directed Cobalt-Phthalocyanine Covalent Organic Polymer as High-Efficient Bifunctional Catalyst for Zn-Air Battery

Carbon cloth (W0S1011) and other electrochemical consumables required for air cathode were provided by SCI Materials Hub.


7. SSRN Cr-induced improvement of structural stability of δ-MnO2 optimizes cycling stability of aqueous Zn-ion batteries

The Zn sheet (99.99%) was purchased from SCI Materials Hub.


8. Nature Communications Atomic-scale regulation of anionic and cationic migration in alkali metal batteries

The lithium metal disk (purity: 99.9%, diameter: 16 mm, thickness: 0.6 mm) was obtained from SCI Materials Hub.


9. Chemical Engineering Journal Zinc-based energy storage with functionalized carbon nanotube/polyaniline nanocomposite cathodes

CNTs were purchased from SCI Materials Hub.


10. ACS Nano Interfacial Chemistry Modulation via Amphoteric Glycine for a Highly Reversible Zinc Anode

Zn foil (>99.99%, 100 μm) was purchased from SCI Materials Hub.


11. ACS Nano High-Energy and Long-Lived Zn–MnO2 Battery Enabled by a Hydrophobic-Ion-Conducting Membrane

Zn foil (99.9%), carbon paper, and carbon felt were obtained from SCI Materials Hub.


12. Nature Communications Unravelling rechargeable zinc-copper batteries by a chloride shuttle in a biphasic electrolyte

Carbon cloth (CeTech W0S1011), PP membrane (Celgard 2300), Glass fiber (Whatman GF/A), anion exchange membrane (Fumasep FAB-PK-130), and cation exchange membrane (Nafion N-117) were purchased from sci materials hub.


13. PROCEEDINGS OF SPIE A dendrite-free and corrosion-suppressive metallic Zn anode regulated by the hybrid aqueous/organic electrolyte

Zn foil (99.9%, 100 μm thickness) was obtained from the SCI Materials Hub.


14. Journal of Alloys and Compounds Cr-induced enhancement of structural stability in δ-MnO2 for aqueous Zn-ion batteries

The Zn sheet (99.99%) and Whatman GF/D paper were available for purchase on on the SCI Materials Hub.


15. Small Multifunctional Umbrella: In Situ Interface Film Forming on the High-Voltage LiCoO2 Cathode by a Tiny Amount of Nanoporous Polymer Additives for High-Energy-Density Li-Ion Batteries

Carbon coating aluminum foils with a thickness of 16 µm were acquired from SCI Materials Hub.


16. Journal of Industrial and Engineering Chemistry Investigation into electrochemical catalytic properties and electronic structure of Mn doped SrCoO3 perovskite catalysts

KB-EC600JD superconducting carbon black was obtained from SCI Materials Hub.


17. Journal of Alloys and Compounds Inhibiting polysulfide shuttle and enhancing polysulfide redox: Conductive 2D metal-organic framework coated separators for lithium-sulfur batteries

Ketjen black was obtained from SCI Materials Hub


电解水

1. International Journal of Hydrogen Energy Gold as an efficient hydrogen isotope separation catalyst in proton exchange membrane water electrolysis

The cathodic catalysts of Pt/C (20 wt%, 2–3 nm) and Au/C (20 wt%, 4–5 nm) were purchased from SCI Materials Hub.


2. Small Science Silver Compositing Boosts Water Electrolysis Activity and Durability of RuO2 in a Proton-Exchange-Membrane Water Electrolyzer

Two fiber felts (0.35 mm thickness, SCI Materials Hub) were used as the porous transport layers at both the cathode and the anode.


3. Advanced Functional Materials Hierarchical Crystalline/Amorphous Heterostructure MoNi/NiMoOx for Electrochemical Hydrogen Evolution with Industry-Level Activity and Stability

Anion-exchange membrane (FAA-3-PK-130) was obtained from SCI Materials Hub.


4. Chemical Engineering Journal Electronic configuration of single ruthenium atom immobilized in urchin-like tungsten trioxide towards hydrazine oxidation-assisted hydrogen evolution under wide pH media

The non-reinforced anion exchange membrane (AEM) of the coupled system was obtained from SCI Materials Hub (Fumasep FAA-3-50).


5. Cell Reports Physical Science Non-layered dysprosium oxysulfide as an electron-withdrawing chainmail for promoting electrocatalytic oxygen evolution

Nickel foam (NF) was offered by SCI Materials Hub (Wuhu, China), and was ultrasonicated in HCl solution, ethanol, and acetone in proper order before being used in electrochemical measurements.


6. Materials Today Catalysis Valence engineering via double exchange interaction in spinel oxides for enhanced oxygen evolution catalysis

Commercial Cu foam was purchased from SCI Materials Hub.


7. Advanced Functional Materials Elucidating the Critical Role of Ruthenium Single Atom Sites in Water Dissociation and Dehydrogenation Behaviors for Robust Hydrazine Oxidation-Boosted Alkaline Hydrogen Evolution

The nonreinforced anion exchange membrane (AEM) of the HzOR-assisted OWS system was purchased from SCI Materials Hub (Fumasep FAA-3-50).


8. ACS Omega Boosting Hydrogen Evolution through the Interface Effects of Amorphous NiMoO4–MoO2 and Crystalline Cu

Pt/C (20 wt %) was purchased from SCI Materials Hub.


9. SSRN The Dual Active Sites Reconstruction on Gelatin In-Situ Derived 3d Porous N-Doped Carbon for Efficient and Stable Water Splitting

Nafion D521 was purchased from SCI Materials Hub.


10. Molecules Interfacial Interaction in NiFe LDH/NiS2/VS2 for Enhanced Electrocatalytic Water Splitting

Carbon cloth (SCI Materials Hub) were employed as substrates for the in-situ formation of VS2 and NiS2/VS2 on its surface via hydrothermal synthesis.


11. Chemical Engineering Journal Mapping hydrogen evolution activity trends of V-based A15 superconducting alloys

Carbon fiber paper (GDS250) was obtained from the SCI materials Hub.


12. Advanced Science A Dual-Cation Exchange Membrane Electrolyzer for Continuous H2 Production from Seawater

The CEMs include GORE-SELECT Gore M788.12(W. L. Gore & Associates, America) and FUMA Fumasep FKB-PK-130 (FuMa Tech., Co., Ltd., Germany) were provided by SCI Materials Hub.


13. Ind. Eng. Chem. Res. Electrolysis of Tertiary Water Effluents - a Pathway to Green Hydrogen

The PEM electrolyzer stack PSC2000 was purchased from the SCI Materials Hub with a maximum hydrogen production capability of 2000 mL/min. The stack had 8 electrolysis cells with a maximum recommended operation current of 36 A and a voltage of 24 V. Its membrane electrode assembly had an effective area of 56 cm2 per layer and a catalyst loading of 4.0 mg/cm2 on Nafion 117 for Ir black as anode and Pt/C as cathode, respectively. The catalysts were deposited on the Nafion membrane to form a catalyst-coated membrane. Titanium bipolar plates were used to construct the electrolyzer. Water is supplied to the anode side of the electrolyzer stack during operation.


14. Adv. Energy Mater. High-Efficiency Iridium-Yttrium Alloy Catalyst for Acidic Water Electrolysis

Carbon paper (Toray TGP-H-060) was purchased from the SCI Materials Hub.


15. Journal of Alloys and Compounds Amorphous/Crystalline Nife Ldh Hierarchical Nanostructure for Large-Current-Density Electrocatalytic Water Oxidation

The commercial NiFe foam (NFF) was offered by SCI Materials Hub.


16. Nanoscale Modulating the electronic structure of VS2 via Ru decoration for efficient pH-universal electrocatalytic hydrogen evolution reaction

W0S1009 Carbon cloth (CC, SCI Materials Hub) were employed as substrate for the in-situ formation of Ru-VS2 and VS2 on its surface via hydrothermal synthesis.


17. Journal of Colloid and Interface Science The dual active sites reconstruction on gelatin in-situ derived 3D porous N-doped carbon for efficient and stable overall water splitting

Nafion D521 was purchased from SCI Materials Hub.


18. Journal of Physics and Chemistry of Solids AgCo bimetallic cocatalyst modified g-C3N4 for improving photocatalytic hydrogen evolution

Nafion D520 dispersion (5 wt%) was purchased from SCI Materials Hub.


19. Separation and Purification Technology NiP2 as an efficient non-noble metal cathode catalyst for enhanced hydrogen isotope separation in proton exchange membrane water electrolysis

Ni supported on Vulcan XC-72, obtained from SCI materials Hub.


20. ACS Appl. Nano Mater. Rapid Electrical-Field-Enhanced Corrosion Endows Ni3Fe/NiFe Layered Double Hydroxide Nanosheets with High-Rate Oxygen Evolution Activity

The Ni3Fe substrate obtained directly from a commercial NiFe foam (nominal Ni 70% at. % + Fe 30 at. %, thickness: 2 mm, porosity: 100 PPI, SCI Materials Hub) was cleaned with acetone, ultrapure water, and ethanol successively and was dried with compressed air.


21. eScience Porous PVA skin-covered thin Zirfon-type separator as a new approach boosting high-rate alkaline water electrolysis beyond 1000 hours’ lifespan

The proposed thin V-Zirfon separator samples were evaluated at first by water electrolysis at 60 °C using a two-compartment zero-gap electrolyzer (LSCF Alkaline Water Electrolyzer stack [1 cell], purchased from SCI Materials Hub).


22. ACS Materials Lett. Promoting Nonacid Hydrogen Evolution over Ni4Mo/Cu by D-Band Regulation

Commercial Pt/C (20%) from Wuhu Eryi Material Technology Co., Ltd.

Note: Wuhu Eryi Material Technology Co. is a company hold by SCI Materials Hub.


23. Adv. Sci. A Dual-Cation Exchange Membrane Electrolyzer for Continuous H2 Production from Seawater

The CEMs include GORE-SELECT Gore M788.12 (W. L. Gore & Associates, America) and FUMA Fumasep FKB-PK-130 (FuMa Tech., Co., Ltd., Germany) were provided by SCI Materials Hub.


24. Nat. Commun. Flexible tungsten disulfide superstructure engineering for efficient alkaline hydrogen evolution in anion exchange membrane water electrolysers

Commercial IrO2, Pt/C (40 wt%), anion exchange membrane (Sustainion X37-50 Grade 60) and carbon fiber cloth (CFC) were obtained from SCI Materials Hub.


25. International Journal of Hydrogen Energy Enhancing performance of anion exchange membrane electrolyzer through modification of carbon paper liquid-gas diffusion layer

The anode is made of Ni–Fe foam (60% Fe + 40% Ni, SCI Materials Hub, China), while the cathode is made of carbon paper electrode. AEM employed is the highly stable PiperION™-A40-HCO3 (with a thickness of 40 μm).


26. Nature Communications Rationally designed Ru catalysts supported on TiN for highly efficient and stable hydrogen evolution in alkaline conditions

Fumasep FAAM-20 anion exchange membrane was purchased from SCI Materials Hub.


燃料电池

1. Polymer Sub-two-micron ultrathin proton exchange membrane with reinforced mechanical strength

Gas diffusion electrode (60% Pt/C, Carbon paper) was purchased from SCI Materials Hub.


2. Polymer Development of rigid side-chain poly(ether sulfone)s based anion exchange membrane with multiple annular quaternary ammonium ion groups for fuel cells

Fumion FAA-3-solut-10 was obtained from SCI Materials Hub.


3. Journal of Power Sources Boosting the power density of the H3PO4/polybenzimidazole high-temperature proton exchange membrane fuel cell to >1.2 W cm-2 via the deposition of acid-based polymer layers on the catalyst layers

PBI resin (molecular weight: 60000, SCI Materials Hub), carbon paper 39BB (SGL Carbon), 70 wt% Pt/C (TANAKA) were obtained from SCI Materials Hub.


4. SSRN Bulky and Rigid Spiro-Adamantane-Fluorene Unit Promoted Microphase Separation in Di-Cation Side Chain Grafted Anion Exchange Membrane

Fumasep FAA-3-20 was obtained from SCI Materials Hub.


5. ACS Sustainable Chem. Eng. Vanadium-Mediated High Areal Capacity Zinc–Manganese Redox Flow Battery

Zinc plate (thickness 1 mm), copper foam (thickness 1.5 mm), and Ketjenblack (KB) EC-600JD were procured from SCI materials hub.


6. ACS Appl. Energy Mater. Investigation of Pd2B- and NiB-Doped Pd–Ni/C Electrocatalysts with High Activity for Methanol Oxidation

Nafion solution (5 wt %, DuPont) was purchased from SCI Materials Hub.


催化-ORR

1. J. Chem. Eng. Superior Efficiency Hydrogen Peroxide Production in Acidic Media through Epoxy Group Adjacent to Co-O/C Active Centers on Carbon Black

In this paper, Vulcan XC 72 carbon black, ion membrane (Nafion N115, 127 μL), Nafion solution (Nafion D520, 5 wt%), and carbon paper (AvCarb GDS 2230 and Spectracarb 2050A-1050) were purchased from SCI Materials Hub.


2. Journal of Colloid and Interface Science Gaining insight into the impact of electronic property and interface electrostatic field on ORR kinetics in alloy engineering via theoretical prognostication and experimental validation

The 20 wt% Pt3M (M = Cr, Co, Cu, Pd, Sn, and Ir) were purchased from SCI Materials Hub. This work places emphasis on the kinetics of the ORR concerning Pt3M (M = Cr, Co, Cu, Pd, Sn, and Ir) catalysts, and integrates theoretical prognostication and experimental validation to illuminate the fundamental principles of alloy engineering.


3. Catalysis Solution-Phase Synthesis of Co-N-C Catalysts Using Alkali Metals-Induced N-C Templates with Metal Vacancy-Nx sites

In this paper, PtRu-C (60 % PtRu (3.5nm) on High Surface Area Carbon, Pt:Ru = 1:1, SCI Materials Hub), an alkaline dispersion (PiperION-A5-HCO3-EtOH, 5 wt.%, SCI Materials Hub), anion exchange membrane (PiperION-A type-HCO3, SCI Materials Hub) were used as received.


4. Green Chemistry Low Cell Voltage Electrosynthesis of Hydrogen Peroxide

The proton exchange membranes (Nafion-117, 211, and 212) were from SCI Materials Hub. They were pre-treated by 5 v/v% H2O2 solution for 1 h at 80°C and then treated by 10 v/v% H2SO4 aqueous solution for 1 h at 80°C before assembling to flow cell reactor.


5. Chemosphere Sustainable H2O2 production in a floating dual-cathode electro-Fenton system for efficient decontamination of organic pollutants

Ketogen black (EC-600JD) was purchased from SCI Materials Hub.


6. Journal of Materials Science Carbon dot intercalated MXene with an excellent oxygen reduction reaction electrocatalytic performance

Nafion (5 wt%) was purchased from SCI Materials Hub (Nafion D520).


电容器

1. Journal of Energy Storage Unraveling the detrimental crosstalk between cathode and anode in the aqueous asymmetric capacitor of activated carbon /copper oxide

In this paper, Fumasep FAA-3-50 anion exchange membrane (Thickness 50 μm, surface resistance 0.6–1.5 Ω cm−2, transference number 92–96 %) was bought from SCI Materials Hub.


2. Composites Science and Technology High modulus carbon fiber based composite structural supercapacitors towards reducing internal resistance and improving multifunctional performance

The aluminium tape (Wuhu Eryi Materials Co. LTD) were used as the current collectors.

Note: Wuhu Eryi Material Technology Co. is a company hold by SCI Materials Hub.


催化加氢

1. Nature Communications Electrosynthesis of polymer-grade ethylene via acetylene semihydrogenation over undercoordinated Cu nanodots

In this paper, activated carbon (Vulcan XC-72) was obtained from SCI Materials Hub.


水处理

1. Water Research Electro-peroxone with solid polymer electrolytes: A novel system for degradation of plasticizers in natural effluents

In this paper, Nafion® N324 (SCI Materials Hub), between a 15 cm2 (3 cm × 5 cm) graphite plate anode and a graphite felt cathode (EP-SPE system)


表征

1. Chemical Engineering Journal Electrochemical reconstitution of Prussian blue analogue for coupling furfural electro-oxidation with photo-assisted hydrogen evolution reaction

An Au nanoparticle film was deposited on the total reflecting plane of a single reflection ATR crystal (SCI Materials Hub, Wuhu, China) via sputter coater.


理论计算

1. Sustainable Energy & Fuels A desulfurization fuel cell with alkali and sulfuric acid byproducts: a prototype and a model

A Fumasep®FKD-PK-75 membrane was used as the cation exchange membrane, in which the the oxygen permeability of membrane was about 1 cm3(STP)/(s cm2 cm Hg) [Ref. SCI Materials Hub]


器件

1. Journal of Materials Science: Materials in Electronics Preparation and application of electrical conductive composites with skin temperature-triggered attachable and on-demand detachable adhesion

Carbon black (CB, Ketjenblack EC 600JD) was purchased from SCI Materials Hub.


材料合成

1. Acta Materialia In situ epitaxial thickening of wafer-scale, highly oriented nanotwinned Ag on tailored polycrystalline Cu substrates

Single-crystal Cu (1 cm × 1 cm) substrates with a (111) orientation were purchased from SCI Materials Hub.


2. Journal of The Electrochemical Society One-Pot Electrodeposition of a PANI:PSS/MWCNT Nanocomposite on Carbon Paper for Scalable Determination of Ascorbic Acid

Raw carbon paper was purchased from SCI Materials Hub


催化降解

1. Journal of Environmental Chemical Engineering Conversion of CoNiFe-LDH to CoNiFe-MOF/LDH as catalyst for efficient heterogeneous electro-Fenton degradation of sulfonamide antibiotics

The hydrophobic microporous laminated carbon paper (HML-CP) (2 cm × 2.5 cm) was chosen as a cathode and fabricated by Wuhu Eryi Material Technology Co. (Anhui, China).

Note: Wuhu Eryi Material Technology Co. is a company hold by SCI Materials Hub.


催化电解

1. Chemical Engineering Journal Modulation of energy barrier of reaction steps over S-doped Ni(OH)2/Cu composites to achieve high-performance urea electrolysis catalysts

Commercial Pt/C (20 wt%) was purchased from Wuhu Eryi Material Technology Co., LTD.

Note: Wuhu Eryi Material Technology Co. is a company hold by SCI Materials Hub.


2. SSRN Efficient Catalysis for Acidic Methanol Oxidation: Exploration of a Low-Platinum Quaternary Alloy Catalyst Via a Two-Step Method

Nafion (5%) was purchased from SCI Materials Hub.


环 境

1. Journal of Materials Research and TechnologyTribocorrosion performance of TC4 anodized/carbon fiber composite in marine environment

Carbon fiber cloth WOS1011H(M) purchased from Wuhu Eryi Materials Technology Co.

Note: Wuhu Eryi Material Technology Co. is a company hold by SCI Materials Hub.


热 电

1. Chemical Engineering Journal High power density charging-free thermally regenerative electrochemical flow cycle for low-temperature thermoelectric conversion

The heat exchangers are composed of 20 μm thick titanium foil (SCI Materials Hub), 1 mm thick rubber gasket and 2 cm thick organic glass from the inside to the outside.

相关产品

为科学研究提供来源广泛的材料
材料合成仪器装置及材料解决方案
备案号:皖ICP备2021011042号-1
关于我们
产品咨询
客服1
客服2
售后与技术咨询
客服1
客服2
微信客服

返回顶部