欢迎来到科学材料站!
首页 > 碳纸 > 疏水微孔层碳纸 > DiffuCarb® YLS-30T增强型疏水微孔层碳纸

DiffuCarb® YLS-30T增强型疏水微孔层碳纸

  • 产品代码:
  • 产品描述:DiffuCarb® YLS-30T Carbon Paper with Enhanced MPL & Wet Proof
  • 品牌:DiffuCarb®
  • 货期:现货
  • 浏览次数:
  • 咨询电话:+86 130-0303-8751
  • 关键词:DiffuCarb® YLS-30T增强型疏水微孔层碳纸, SCI Materials Hub, 科学材料站
DiffuCarb® YLS-30T X系列增强型疏水微孔层碳纸|A/B/C/H 快速选型与全系列参数对比
DiffuCarb® YLS-30T X Series · A / B / C / H Enhanced Hydrophobic MPL Carbon Paper

YLS-30T X系列增强型疏水微孔层碳纸
可调疏水度 · 可调 MPL 载量 · 面向多类气-液-固三相界面

基于东丽 Toray TGPH060 碳纸构建“碳纸基底 + 疏水处理 + MPL 微孔层”结构, 通过 A / B / C / H 系列与 2–6 级 MPL 载量组合,对气体扩散、液体阻隔和水管理能力进行分级匹配, 面向燃料电池、CO₂ 电解、水电解及科研型气体扩散电极开发。

Toray TGPH060 基底 0.23–0.30 mm A/B/H:XC-72R C:XC-72 MPL 2–6 级 20 个标准型号
01

产品概述

DiffuCarb® YLS-30T · Enhanced Hydrophobic MPL Carbon Paper

DiffuCarb® YLS-30T X系列是一套基于 Toray TGPH060 碳纸开发的增强型疏水微孔层碳纸。 产品通过调节碳纸基材疏水程度、MPL 疏水程度、MPL 炭黑类型以及 MPL 载量/厚度等级, 建立 A、B、C、H 四类主要系列,并进一步细分为 2–6 级,以覆盖不同的气体传输、液体渗透和水管理需求。

当前页面覆盖 A2–A6、B2–B6、C2–C6、H2–H6 共 20 个标准型号。 总厚度约为 0.23–0.30 mm,具体厚度随 MPL 涂层载量变化。 系列设计重点并不是简单追求“更厚”或“更疏水”,而是针对三相界面的气液平衡进行匹配: 薄 MPL 有利于更快气体传输,厚 MPL 则增强液体阻挡和抗淹没能力。

20

20 个标准型号

A/B/C/H 四大系列,每个系列提供 2–6 五个 MPL 载量等级。

0.23

0.23–0.30 mm

总厚度随 MPL 载量变化,适合对 GDL / GDE 厚度进行分级研究。

H₂O

可调疏水性

从中等到高疏水等级,匹配低湿、强抗渗透和高浓度电解液等不同工况。

MPL

可调微孔层

2–6 级用于表达 MPL 载量/厚度等级,数字越大,MPL 越厚。

02

结构与材料特性

Carbon Paper Substrate + Hydrophobic Treatment + MPL

MPL 微孔层
XC-72R 或 XC-72
疏水处理层
系列化调节基材与 MPL 疏水等级
Toray TGPH060 碳纸基底
提供导电、多孔与结构支撑
示意图用于说明层级关系,不按真实厚度比例绘制。总厚度约 0.23–0.30 mm,随 MPL 载量等级变化。
材料组成
  • 基底:东丽 Toray TGPH060 碳纸。
  • A/B/H 系列:当前产品定义使用 Vulcan XC-72R 炭黑构建 MPL。
  • C 系列:当前产品定义使用 Vulcan XC-72 炭黑,强调更致密的 MPL 孔结构。
  • 总厚度:约 0.23–0.30 mm,随 MPL 涂层载量/厚度等级变化。
材料差异说明:按当前产品定义,XC-72R 用于 A/B/H 系列,结构相对疏松、强调气体扩散; C 系列采用 XC-72,强调更致密的孔结构与液体阻隔。具体体系表现仍应结合压差、温湿度、电解液和压紧条件验证。
03

X系列分类

A / B / C / H 系列的基材疏水度、MPL 疏水度与炭黑体系

A

A系列 · 中等疏水

XC-72R MPL,适合低电解液渗透环境、燃料电池与常规气体扩散研究。

基材疏水:●○○○○○
MPL 疏水:●●●○○○
型号:A2 / A3 / A4 / A5 / A6
B

B系列 · 较高疏水

XC-72R MPL,提高整体疏水与抗渗透能力,适合燃料电池及中等至较强液体负荷。

基材疏水:●●●○○○
MPL 疏水:●●●●○○
型号:B2 / B3 / B4 / B5 / B6
C

C系列 · 致密 MPL

使用 XC-72 构建较致密微孔层,面向 CO₂RR、高压差和更强液体阻隔需求。

基材疏水:●○○○○○
MPL 疏水:●●●○○○
型号:C2 / C3 / C4 / C5 / C6
H

H系列 · 高疏水

XC-72R MPL,基材高疏水,强调抗电解液渗透与长时间水管理稳定性。

基材疏水:●●●●●○
MPL 疏水:●●●●○○
型号:H2 / H3 / H4 / H5 / H6
05
FULL MODEL COMPARISON

全系列产品核心参数对比表

A2–A6 / B2–B6 / C2–C6 / H2–H6 共 20 个标准型号,一张表完成参数与价格比较

系列型号碳纸基材基材疏水度MPL疏水度MPL材料MPL等级总厚度选型特点5×510×1020×2019×34
AA2Toray TGPH060●○○○○○●●●○○○XC-72R20.23–0.30 mm*中等疏水 / 薄 MPL¥25¥65¥195¥380
AA3Toray TGPH060●○○○○○●●●○○○XC-72R30.23–0.30 mm*中等疏水 / 薄 MPL¥30¥70¥200¥400
AA4Toray TGPH060●○○○○○●●●○○○XC-72R40.23–0.30 mm*中等疏水 / 平衡 MPL¥50¥100¥260¥500
AA5Toray TGPH060●○○○○○●●●○○○XC-72R50.23–0.30 mm*中等疏水 / 厚 MPL¥100¥350¥980¥1200
AA6Toray TGPH060●○○○○○●●●○○○XC-72R60.23–0.30 mm*中等疏水 / 加厚 MPL¥120¥400¥1200¥1500
BB2Toray TGPH060●●●○○○●●●●○○XC-72R20.23–0.30 mm*较高疏水 / 薄 MPL¥30¥70¥200¥380
BB3Toray TGPH060●●●○○○●●●●○○XC-72R30.23–0.30 mm*较高疏水 / 薄 MPL¥50¥100¥250¥400
BB4Toray TGPH060●●●○○○●●●●○○XC-72R40.23–0.30 mm*较高疏水 / 平衡 MPL¥70¥150¥300¥500
BB5Toray TGPH060●●●○○○●●●●○○XC-72R50.23–0.30 mm*较高疏水 / 厚 MPL¥100¥350¥980¥1200
BB6Toray TGPH060●●●○○○●●●●○○XC-72R60.23–0.30 mm*较高疏水 / 加厚 MPL¥120¥400¥1200¥1500
CC2Toray TGPH060●○○○○○●●●○○○XC-7220.23–0.30 mm*致密 MPL / 薄层¥25¥70¥200¥380
CC3Toray TGPH060●○○○○○●●●○○○XC-7230.23–0.30 mm*致密 MPL / 薄层¥30¥100¥250¥400
CC4Toray TGPH060●○○○○○●●●○○○XC-7240.23–0.30 mm*致密 MPL / 平衡层¥50¥150¥300¥500
CC5Toray TGPH060●○○○○○●●●○○○XC-7250.23–0.30 mm*致密 MPL / 厚层¥100¥350¥980¥1200
CC6Toray TGPH060●○○○○○●●●○○○XC-7260.23–0.30 mm*致密 MPL / 加厚层¥120¥400¥1200¥1500
HH2Toray TGPH060●●●●●○●●●●○○XC-72R20.23–0.30 mm*高疏水 / 薄 MPL¥50¥100¥300¥480
HH3Toray TGPH060●●●●●○●●●●○○XC-72R30.23–0.30 mm*高疏水 / 薄 MPL¥70¥150¥450¥600
HH4Toray TGPH060●●●●●○●●●●○○XC-72R40.23–0.30 mm*高疏水 / 平衡 MPL¥90¥200¥600¥800
HH5Toray TGPH060●●●●●○●●●●○○XC-72R50.23–0.30 mm*高疏水 / 厚 MPL¥100¥350¥980¥1200
HH6Toray TGPH060●●●●●○●●●●○○XC-72R60.23–0.30 mm*高疏水 / 加厚 MPL¥120¥400¥1200¥1500
* 总厚度 0.23–0.30 mm 为系列范围,具体型号厚度随 MPL 载量/厚度等级变化;当前资料未给出每个型号独立实测厚度,因此不自行拆分具体数值。
06

型号定义与选型指南

数字代表 MPL 载量/厚度等级;系列字母代表不同疏水与 MPL 体系

2–3

薄 MPL · 2–3级

气体传输路径较短,适合气体传输要求高、易干涸的体系,如低湿度燃料电池和部分 CO₂RR 条件。

4

中等 MPL · 4级

平衡型设计,兼顾气体扩散与抗淹没,适合通用电解与科研对比,常作为初次选型起点。

5–6

厚 MPL · 5–6级

增强液体阻挡与抗渗透,更适合长时间运行、高电流密度或电解液较易渗透的环境。

典型应用推荐
  • CO₂ 电解 / CO₂RR:A3–A4 / C3–C4,兼顾气体扩散与电解液阻隔。
  • PEMFC / AEMFC:A2–A3 或 H3,用于水管理与气体扩散平衡。
  • 碱性水电解阴极:B5–B6 / H5–H6,加强抗渗透并降低电极淹没风险。
  • 高压差电解:优先考虑 C 系列,重点比较 C3–C5。
  • 科研实验:建议同系列选 3/4/5 三个相邻等级进行 MPL 厚度梯度比较。
07

性能与结构优势

针对气-液-固三相界面的结构设计

H₂O

可调疏水性

通过系列差异与 MPL 等级组合,在中等至高疏水范围内进行选型,匹配不同液体负荷。

GAS

气体扩散能力

利用多孔碳纸与 MPL 结构构建气体传输通道;较薄 MPL 更偏向低扩散阻力。

Ω

导电碳纸基底

Toray TGPH060 碳纸作为导电多孔骨架,适用于 GDL/GDE 的电子传导与结构支撑。

ME

机械稳定性

支持常规裁切、辊压和 MEA 装配。实际压紧量和热压条件应结合具体膜电极体系优化。

08

应用范围

Fuel Cells · CO₂ Electrolysis · Water Electrolysis · Research

燃料电池 PEMFC / AFC / AEMFC

作为 GDL 或气体扩散电极背衬,用于气体传输、水管理和催化层支撑。

CO₂ 电解 / CO₂RR

作为 GDE 支撑层,辅助构建稳定气-液-固三相界面并控制电解液渗透。

水电解

碳纸更适合阴极侧或经体系验证的电极位置;阳极高电位环境下通常不优先使用碳基扩散层。

科研与实验室

用于不同 MPL 厚度、疏水度、炭黑体系和压紧条件下的电极结构对比研究。

09

使用方法

Cutting · Assembly · Electrolyte Compatibility · Mechanical Support

1

裁切

建议使用激光切割或锋利刀具,减少毛边与碳纤维撕裂;裁切时注意保护 MPL 表面。

2

组装

堆叠时保持均匀压紧,避免局部高压导致碳纸破裂、孔结构压实或 MPL 表面受损。

3

电解环境

对碱性与酸性体系均应结合实际电位窗口、温度和浸泡时间验证;尤其避免将碳纸长期置于高阳极电位。

4

机械支撑

在需要额外机械强度或导流结构时,可根据体系兼容性考虑搭配钛网、镍网等多孔金属支撑。

10

催化剂喷涂到碳纸上的流程

从浆料分散到 MEA 组装的通用实验流程

1

浆料制备

将催化剂、离聚物和适配溶剂混合分散,控制固含量、黏度与离聚物比例。

2

分散处理

采用超声或搅拌使浆料均匀;具体时间和能量应避免造成催化剂或离聚物结构损伤。

3

喷涂 / 涂覆

可采用气动喷涂、刮涂或丝网印刷等方法,将催化层均匀沉积在 MPL 一侧。

4

干燥与组装

干燥和后处理温度需依据催化剂、离聚物与溶剂体系确定,再与膜或其他组件完成电极/MEA 装配。

原始说明中的 60–80 ℃干燥及 120–200 ℃热处理可作为某些体系的工艺参考,但不同 Nafion/AEM 离聚物、溶剂和催化剂的耐温范围不同,正式工艺应以材料体系验证为准。
11

型号 / 尺寸 / 价格表

人民币 CNY¥ · 参考零售价

系列型号5×5 cm10×10 cm20×20 cm19×34 cm特点
A系列A2¥25¥65¥195¥380中等疏水 / 薄 MPL
A系列A3¥30¥70¥200¥400中等疏水 / 薄 MPL
A系列A4¥50¥100¥260¥500中等疏水 / 平衡 MPL
A系列A5¥100¥350¥980¥1200中等疏水 / 厚 MPL
A系列A6¥120¥400¥1200¥1500中等疏水 / 加厚 MPL
B系列B2¥30¥70¥200¥380较高疏水 / 薄 MPL
B系列B3¥50¥100¥250¥400较高疏水 / 薄 MPL
B系列B4¥70¥150¥300¥500较高疏水 / 平衡 MPL
B系列B5¥100¥350¥980¥1200较高疏水 / 厚 MPL
B系列B6¥120¥400¥1200¥1500较高疏水 / 加厚 MPL
C系列C2¥25¥70¥200¥380致密 MPL / 薄层
C系列C3¥30¥100¥250¥400致密 MPL / 薄层
C系列C4¥50¥150¥300¥500致密 MPL / 平衡层
C系列C5¥100¥350¥980¥1200致密 MPL / 厚层
C系列C6¥120¥400¥1200¥1500致密 MPL / 加厚层
H系列H2¥50¥100¥300¥480高疏水 / 薄 MPL
H系列H3¥70¥150¥450¥600高疏水 / 薄 MPL
H系列H4¥90¥200¥600¥800高疏水 / 平衡 MPL
H系列H5¥100¥350¥980¥1200高疏水 / 厚 MPL
H系列H6¥120¥400¥1200¥1500高疏水 / 加厚 MPL
  • 价格为参考零售价,批量采购可议价。
  • 同系列数字越大表示 MPL 载量/厚度等级越高。
  • 具体库存、交期、定制疏水比例、MPL 载量及预涂催化层服务请下单前确认。
12

常见问题 FAQ

系列选择、MPL、渗透、水电解与定制

Q1:YLS-30T 能否用于水电解阳极?
通常不优先推荐将碳基扩散层用于高阳极电位环境,因为碳材料存在氧化风险。YLS-30T 更适合作为阴极扩散层或经具体电位窗口验证后的电极支撑。
Q2:A / B / C / H 系列如何选择?
A 系列偏中等疏水;B 系列提高整体疏水;C 系列使用 XC-72,强调较致密 MPL 与高压差液体阻隔;H 系列基材高疏水,强调强抗渗透。可结合上方快速选型表初筛。
Q3:MPL 层越厚越好吗?
不是。数字越大代表 MPL 载量/厚度等级更高,通常液体阻挡能力增强,但气体扩散路径也会增加。应根据气体供应、液体渗透、湿度和电流负荷平衡选择。
Q4:C 系列与 A 系列最主要的区别是什么?
按当前产品定义,两者基材疏水等级与 MPL 疏水标识接近,但 C 系列采用 XC-72 构建更致密的 MPL,更多面向高压差或更强液体阻隔需求。
Q5:如何提升使用寿命?
建议避免不必要的高阳极电位和强氧化环境,合理控制压紧率、温度、酸碱条件及 MPL 疏水等级,并避免机械折弯、划伤或长时间污染 MPL 表面。
Q6:是否支持定制?
支持咨询 MPL 载量、疏水比例、尺寸裁切及催化层预涂覆等服务;具体可实现范围、MOQ 与交期以最终确认结果为准。
13

联系方式与购买

科学材料站 · SCI Materials Hub

DiffuCarb® YLS-30T X系列采购与技术选型

如需确认型号、库存、批量价格、定制 MPL 或催化层预涂覆服务,请联系我们。

淘宝店铺科学材料站
微信SCI-Materials-Hub
进入淘宝商品页面


部分使用和引用我们材料的参考文献 (摘自于Google Scholar)


二氧化碳还原

1. ACS Nano Strain Relaxation in Metal Alloy Catalysts Steers the Product Selectivity of Electrocatalytic CO2 Reduction

The bipolar membrane (Fumasep FBM) in this paper was purchased from SCI Materials Hub, which was used in rechargeable Zn-CO2 battery tests. The authors reported a strain relaxation strategy to determine lattice strains in bimetal MNi alloys (M = Pd, Ag, and Au) and realized an outstanding CO2-to-CO Faradaic efficiency of 96.6% with outstanding activity and durability toward a Zn-CO2 battery.


2. Front. Chem. Boosting Electrochemical Carbon Dioxide Reduction on Atomically Dispersed Nickel Catalyst

In this paper, Vulcan XC-72R was purchased from SCI Materials Hub. Vulcan XC 72R carbon is the most common catalyst support used in the anode and cathode electrodes of Polymer Electrolyte Membrane Fuel Cells (PEMFC), Direct Methanol Fuel Cells (DMFC), Alkaline Fuel Cells (AFC), Microbial Fuel Cells (MFC), Phosphoric Acid Fuel Cells (PAFC), and many more!


3. Adv. Mater. Partially Nitrided Ni Nanoclusters Achieve Energy-Efficient Electrocatalytic CO2 Reduction to CO at Ultralow Overpotential

An AEM membrane (Sustainion X37-50 Grade RT), purchased from SCI Materials Hub) was activated in 1 M KOH for 24 h, washed with ultra-purity water prior to use.


4. Adv. Funct. Mater. Nanoconfined Molecular Catalysts in Integrated Gas Diffusion Electrodes for High-Current-Density CO2 Electroreduction

In this paper (Supporting Information), an anion exchanged membrane (Fumasep FAB-PK-130 obtained from SCI Materials Hub (www.scimaterials.cn)) was used to separate the catholyte and anolyte chambers.

SCI Materials Hub: we also recommend our Fumasep FAB-PK-75 for the use in a flow cell.


5. Appl. Catal. B Efficient utilization of nickel single atoms for CO2 electroreduction by constructing 3D interconnected nitrogen-doped carbon tube network

In this paper, the Nafion 117 membrane was obtained from SCI Materials Hub.


6. Vacuum Modulable Cu(0)/Cu(I)/Cu(II) sites of Cu/C catalysts derived from MOF for highly selective CO2 electroreduction to hydrocarbons

In this paper, Proton exchange membrane (Nafion 117), Nafion D520, and Toray 060 carbon paper were purchased from SCI Materials Hub.


7. National Science Review Confinement of ionomer for electrocatalytic CO2 reduction reaction via efficient mass transfer pathways

An anion exchange membrane (PiperION-A15-HCO3) was obtained from SCI Materials Hub.


8. Catalysis Communications Facilitating CO2 electroreduction to C2H4 through facile regulating {100} & {111} grain boundary of Cu2O

Carbon paper (TGPH060), membrane solution (Nafion D520), and ionic membrane (Nafion N117) were obtained from Wuhu Eryi Material Technology Co., Ltd.

Note: Wuhu Eryi Material Technology Co. is a company hold by SCI Materials Hub.


9. Advanced Energy Materials Interatomic Electronegativity Offset Dictates Selectivity When Catalyzing the CO2 Reduction Reaction

The bipolar membrane (Fumasep FBM), carbon paper (SIGRACET 29BC, Freudenberg paper H23C2), ion exchange membrane (Nafion N117), and anion exchange membrane (Fumasep, FAA-3-PK-130) were all obtained from SCI Materials Hub.


10. Separation and Purification Technology *CO spillover induced by bimetallic xZnO@yCuO active centers for enhancing C–C coupling over electrochemical CO2 reduction

5 % Nafion solution was obtained through SCI Materials Hub.


11. National Science Review Confinement of ionomer for electrocatalytic CO2 reduction reaction via efficient mass transfer pathways

In this paper, PiperION-A5-HCO3 anion exchange resin, Fumion FAA anion exchange resin, PiperION-A15-HCO3 and FAA-3-50 were purchased from SCI Materials Hub.


12. Vacuum Controllable dual Cu–Cu2O sites derived from CuxAl-LDH for CO2 electroreduction to hydrocarbons

Nafion and carbon paper (TGPH060) were supplied through SCI Materials Hub.


13. Chemical Engineering Journal Coupling electrocatalytic CO2 reduction with glucose oxidation for concurrent production of formate with high efficiency

An AEM membrane (PiperION, purchased from SCI Materials Hub) was activated in 1 M KOH for 24 h, washed with ultra-purity water prior to use.


14. Chem Identification of Cu0/Cu+/Cu0 interface as superior active sites for CO2 electroreduction to C2+ in neutral condition

In this paper, Sustainion X37-50 Grade RT membrane and the MEA electrolyzer (CRRMEA1a, Figure S34) with 1cm2 active area were obtained from SCI Materials Hub.

微信公众号中文报道:Chem:基于热力学驱动的混合策略形成Cu0/Cu+/Cu0界面用于中性条件CO2电还原C2+


15. Surfaces and Interfaces Modulating surface microenvironment based on Ag-adorned CuO flower-liked nanospheres for strengthening C-‍C coupling during CO2RR

5 wt.% of Nafion solution, and N115 proton exchange membrane were procured with the help of SCI Materials Hub


16. ACS Appl. Energy Mater. Nanoporous Bismuth Induced by Surfactant-Modified Dealloying for Efficient Electrocatalytic Reduction of CO2 to Formic Acid

The anion exchange membrane (AEM, PiperION A20) and cation exchange membrane (CEM, Nafion 117) were obtained from SCI Materials Hub.


17. Adv. Energy Mater. Tailoring Microenvironments and In Situ Transformations of Cu Catalysts for Selective and Stable Electrosynthesis of Multicarbon Products

For GDE-based CO₂ electrolysis, the MEA reactor (CRRMEA5a, Sci-Materials Hub) consists of a titanium anode plate and a cathode plate with flow fields, along with insulating gaskets, integrated into a compression cell. The geometric area of each flow field is 5 cm² An anion exchange membrane (PiperION, A40-HCO3, Versogen) was used to separate the anode and the cathode.


18. Journal of Environmental Chemical Engineering Evaluation of electromethanogenesis in a microbial electrolysis cell using nylon cloth as a separator: reactor performance and metagenomic analysis

A commercial Nafion PEM (SCI Materials Hub) was used as the control to compare the electromethanogenesis performance.


19. Angew pH-Universal Electrocatalytic CO2 Reduction with Ampere-level Current Density on Doping-engineered Bismuth Sulfide

CRRMEA1a 1cm2 MEA electrolyzer (Figure 4d) was obtained from SCI Materials Hub.

微信公众号中文报道:安徽师范大学最新Angew!全pH范围内铋基催化剂用于安培级电流密度电催化CO2还原


20. Separation and Purification Technology Coupling regulation of boron doping and morphology in nano-floral CuO using one pot method for electrocatalytic CO2 reduction

Carbon paper (TGPH060), Dupont Nafion solution (D520), and proton exchange membrane (N117) were acquired by SCI Materials Hub.


21. Chemical Engineering Journal Manipulating dual effects of morphology and oxygen vacancies through the incorporation of CuO onto CeO2 nanospheres for electrochemical CO2 reduction

Carbon paper (TGPH060), Dupont Nafion solution (D520), and proton exchange membrane (N117) were acquired by SCI Materials Station Hub (SCI Materials Hub, the same author as Ref. 20).


22. Advanced Materials Universal Formation of Single Atoms from Molten Salt for Facilitating Selective CO2 Reduction

The Nafion D520 dispersion and gas diffusion electrode (GDE, Sigracet, 39BB) were obtained from SCI Materials Hub (www.scimaterials.cn).


23. Science Bulletin Compressive strain in Cu catalysts: Enhancing generation of C2+ products in electrochemical CO2 reduction

CRRMEA1a 1cm2 MEA electrolyzer (Figure 3a) was obtained from SCI Materials Hub.

微信公众号中文报道:Science Bulletin:优化水覆盖度促进安培级电流密度下CO2还原C2+


24. Processes Investigation of a Hydrophobic Sputtered Cu Electrode to Electrocatalyze CO2 Towards a C2+ Product: The Effect of Substrate and Catalyst Thickness

Carbon paper (SGL CARBON, SGL36BB, purchased from SCI Materials Hub)


25. Chemical Engineering Journal In-situ reconstruction of active bismuth for enhanced CO2 electroreduction to formate

Anion-exchange membrane (Fumasep FAA-3–50) was purchased from SCI Materials Hub.


26. Nature Communications Bromide-mediated membraneless electrosynthesis of ethylene carbonate from CO2 and ethylene

Nafion D520 polymer binder solution (5 wt%) was purchased from SCI Materials Hub.


27. Ionics Sulfur-modified promoting the electrochemical CO2 reduction into formate performance of BiOI

Carbon black (Vulcan XC- 72, Cabot), teflon-treated carbon paper (TGP-H- 060, Toray), and proton exchange membrane (Nafion- 117) were purchased from SCI Materials Hub.


28. Nature Communications Continuous decoupled redox electrochemical CO2 capture

The anion exchange membrane (FAA-3-PK-75) with a thickness of 75 ± 5 μm was purchased from SCI Materials Hub.


29. Journal of Energy Chemistry Construction of efficient electrodes for CO2RR through microenvironment regulation of hydrophobic ionomer

An anion exchange membrane (PiperION-A15-HCO3, SCI Materials Hub) was used to separate the anode and cathode chambers.


30. Journal of Energy Chemistry The insights into ionomer-catalyst interactions enabling high-efficiency CO2 electroreduction in pure water

Methylimidazolium ionomer powder (Sustainion XA-9, dispersed in ethanol at 5 wt%), and piperidinium ionomer solution (PiperION A5, dispersed in ethanol at 5 wt%) were purchased from SCI Materials Hub (

www.scimaterials.cn)


31. ChemElectroChem Scaling CO Electrolyzers for Carbon-Neutral Chemical Synthesis

Specifically, the PTFE-CB ink was prepared by mixing 0.1 g of CB (Vulcan XC-72R, SCI Materials Hub) with PTFE (25 % of the CB mass) in 50 mL of methanol. After ultrasonication for 2 hours, the ink was air-sprayed onto the gas diffusion layer (GDL) (Sigracet 28 BC, SCI Materials Hub) at 60 °C. The anion exchange membrane (AEM) was Fumasep FAA-3-50 (SCI Materials Hub)


32. American Institute of Chemical Engineers Porous carbon-supported Ag catalysts enablehigh-current-density CO2 electroreductionto CO with enhanced mass transport

Carbon paper (SGL Sigracet 39 BB SGL Carbon), anion exchange membrane (Sustainion X37-50 Grade T, Dioxide Materials), Ni foam was obtained from SCI Materials Hub.


33. Applied Catalysis B: Environment and Energy Microenvironmental hydrophobicity-regulated evolution of reaction sites for boosting electrochemical CO2 reduction

A gas diffusion layer AvCarb GDS2240 was obtained from SCI MATERIALS HUB.


34. Applied Catalysis B: Environment and Energy Boosting seawater desalination driven by electroreduction of CO2 to formate on bimetallic Sn/Cu polyphthalocyanine frameworks

Gas diffusion layers (GDLs) consisting of Sigracet 36BB substrates (SCI Materials Hub) were utilized.


35. Catalysis Today Efficient and cost-effective electrocatalysts for coproduction of formate through electrocatalytic oxidation of PET-derived ethylene glycol coupled with CO2 reduction

Cation exchange membrane ((Nafion 117, DuPont) was purchased from SCI Materials Hub, China.


电池

1. J. Mater. Chem. A Blocking polysulfides with a Janus Fe3C/N-CNF@RGO electrode via physiochemical confinement and catalytic conversion for high-performance lithium–sulfur batteries

Graphene oxide (GO) in this paper was obtained from SCI Materials Hub. The authors introduced a Janus Fe3C/N-CNF@RGO electrode consisting of 1D Fe3C decorated N-doped carbon nanofibers (Fe3C/N-CNFs) side and 2D reduced graphene oxide (RGO) side as the free-standing carrier of Li2S6 catholyte to improve the overall electrochemical performance of Li-S batteries.


2. Joule A high-voltage and stable zinc-air battery enabled by dual-hydrophobic-induced proton shuttle shielding

This paper used more than 10 kinds of materials from SCI Materials Hub and the authors gave detailed properity comparsion.

The commercial IEMs of Fumasep FAB-PK-130 and Nafion N117 were obtained from SCI Materials Hub.

Gas diffusion layers of GDL340 (CeTech) and SGL39BC (Sigracet) and Nafion dispersion (Nafion D520) were obtained from SCI Materials Hub.

Zn foil (100 mm thickness) and Zn powder were obtained from the SCI Materials Hub.

Commercial 20% Pt/C, 40% Pt/C and IrO2 catalysts were also obtained from SCI Materials Hub.


3. Journal of Energy Chemistry Vanadium oxide nanospheres encapsulated in N-doped carbon nanofibers with morphology and defect dual-engineering toward advanced aqueous zinc-ion batteries

In this paper, carbon cloth (W0S1011) was obtained from SCI Materials Hub. The flexible carbon cloth matrix guaranteed the stabilization of the electrode and improved the conductivity of the cathode.


4. Energy Storage Materials Defect-abundant commercializable 3D carbon papers for fabricating composite Li anode with high loading and long life

The 3D carbon paper (TGPH060 raw paper) were purchased from SCI Materials Hub.


5. Nanomaterials A Stable Rechargeable Aqueous Zn–Air Battery Enabled by Heterogeneous MoS2 Cathode Catalysts

Nafion D520 (5 wt%), and carbon paper (GDL340) were received from SCI-Materials-Hub.


6. SSRN An Axially Directed Cobalt-Phthalocyanine Covalent Organic Polymer as High-Efficient Bifunctional Catalyst for Zn-Air Battery

Carbon cloth (W0S1011) and other electrochemical consumables required for air cathode were provided by SCI Materials Hub.


7. SSRN Cr-induced improvement of structural stability of δ-MnO2 optimizes cycling stability of aqueous Zn-ion batteries

The Zn sheet (99.99%) was purchased from SCI Materials Hub.


8. Nature Communications Atomic-scale regulation of anionic and cationic migration in alkali metal batteries

The lithium metal disk (purity: 99.9%, diameter: 16 mm, thickness: 0.6 mm) was obtained from SCI Materials Hub.


9. Chemical Engineering Journal Zinc-based energy storage with functionalized carbon nanotube/polyaniline nanocomposite cathodes

CNTs were purchased from SCI Materials Hub.


10. ACS Nano Interfacial Chemistry Modulation via Amphoteric Glycine for a Highly Reversible Zinc Anode

Zn foil (>99.99%, 100 μm) was purchased from SCI Materials Hub.


11. ACS Nano High-Energy and Long-Lived Zn–MnO2 Battery Enabled by a Hydrophobic-Ion-Conducting Membrane

Zn foil (99.9%), carbon paper, and carbon felt were obtained from SCI Materials Hub.


12. Nature Communications Unravelling rechargeable zinc-copper batteries by a chloride shuttle in a biphasic electrolyte

Carbon cloth (CeTech W0S1011), PP membrane (Celgard 2300), Glass fiber (Whatman GF/A), anion exchange membrane (Fumasep FAB-PK-130), and cation exchange membrane (Nafion N-117) were purchased from sci materials hub.


13. PROCEEDINGS OF SPIE A dendrite-free and corrosion-suppressive metallic Zn anode regulated by the hybrid aqueous/organic electrolyte

Zn foil (99.9%, 100 μm thickness) was obtained from the SCI Materials Hub.


14. Journal of Alloys and Compounds Cr-induced enhancement of structural stability in δ-MnO2 for aqueous Zn-ion batteries

The Zn sheet (99.99%) and Whatman GF/D paper were available for purchase on on the SCI Materials Hub.


15. Small Multifunctional Umbrella: In Situ Interface Film Forming on the High-Voltage LiCoO2 Cathode by a Tiny Amount of Nanoporous Polymer Additives for High-Energy-Density Li-Ion Batteries

Carbon coating aluminum foils with a thickness of 16 µm were acquired from SCI Materials Hub.


16. Journal of Industrial and Engineering Chemistry Investigation into electrochemical catalytic properties and electronic structure of Mn doped SrCoO3 perovskite catalysts

KB-EC600JD superconducting carbon black was obtained from SCI Materials Hub.


17. Journal of Alloys and Compounds Inhibiting polysulfide shuttle and enhancing polysulfide redox: Conductive 2D metal-organic framework coated separators for lithium-sulfur batteries

Ketjen black was obtained from SCI Materials Hub


18. Chemical Engineering Journal Regulating N-doped biochar with Fe-Mo heterojunctions as cathode in long-life zinc-air battery

Conductive carbon black (Vulcan XC-72R) was purchased from SCI Materials Hub (Wuhu, Anhui).


19. Nature Portfolio Fast-kinetics and high-compatibility aqueous cadmium-metal battery for next-generation energy storage infrastructures (Under review.)

Cd foil (99.9%), Zn foil (99.9%) and polytetrafluoroethylene (PTFE) aqueous dispersion solution were obtained from the supplier of SCI Materials Hub.

All cells were assembled using two-electrode Swagelok-type configurations, supported by SCI Materials Hub.


20. Polymer A biodegradable gel polymer membrane derived from poly-gamma-glutamic acid for high-rate and long-lifespan sodium metal batteries

Celgard 2400 separator (polypropylene (PP), 25 μm) was sourced from SCI Materials Hub.


21. ACS Applied Energy Materials 3D Graphene Nanoflake/Vertically Aligned Carbon Nanotube/CoAl Layered Double Oxide Composites for High-Performance Lithium-Ion Batteries

Carbon-coated aluminum foil was procured from SCI Materials Hub.


22. Chemistry A European Jouranl Regulating the Interfacial Charge Density by Constructing a Novel Zn Anode-Electrolyte Interface for Highly Reversible Zn Anode

Ketjenblack (KB) was purchased from SCI Materials Hub


23. Advanced Functional Materials A Biphasic Membraneless Zinc-Iodine Battery with High Volumetric Capacity

Graphite felt (GF, G650A) was purchased from SCI Materials Hub.


24. Science Advances Alcohol molecule coupling: A universal approach to modulating amorphousness in vanadium-based cathodes for high-rate and durable aqueous zinc-ion batteries

Fueiceel® BM03 Battery test hardware in Figure 6F was obtained from SCI Materials Hub. The Fueiceel® BM03 scale-up battery powering an LED panel.


25. Nature Communications Cooperative Jahn-Teller effect and engineered long-range strain in manganese oxide/graphene superlattice for aqueous zinc-ion batteries

The Zn||MnO2 coin cells were assembled by Zn foil (thickness of 0.1 mm, 99.99%, SCI Materials Hub) counter electrodes


26. Adv. Funct. Mater. Construction of Ionic Conductive Electrode/ Electrolyte Interphases via Li+ Coordination Regulator for 4.7 V Li/ LiNi0.9Co0.05Mn0.05O2 Batteries

The CR2032 coin cells were assembled with a Celgard 2400 separator (SCI Materials Hub.) in a glove box.


27. Journal of Energy Storage Bacterial cellulose mixed with glass fiber as a separator to achieve long cycle life of aqueous zinc-ion batteries

304 stainless steel foil (99.99 % purity, purchased from SCI Materials Hub)


28. Nature Communications Dual-structure-breaking electrolyte enables practical cadmium-metal battery

Two-electrode (Swagelok2E002) and three-electrode (Swagelok3E2e) Swagelok-type configurations were supported by SCI Materials Hub (Supplementary Figs. 102, 103)

The stacked configuration (BM03) for the scaled-up cell was supported by SCI Materials Hub.

Cd foil (99.9%), Zn foil (99.9%), and polytetrafluoroethylene (PTFE) aqueous dispersion solution (D-210C, solid content: 60 w%, size: ~0.25 μm size) were obtained from the supplier of SCI Materials Hub.


29. Nature Nanotechnology A nanoengineered lithium-hosting carbon/zinc oxide composite electrode material for efficient non-aqueous lithium metal batteries

The operando battery pressure sensing equipment (BS01) was purchased from SCI Materials Hub (www.scimaterials.cn).


30. Small Enabling a Robust Long-Life Zinc-Iodine Flow Battery by Stabilizing the Zinc Anode in a Halide-Rich Electrolyte

Nafion 115 membrane (N115) was purchased from SCI Materials Hub.


电解水

1. International Journal of Hydrogen Energy Gold as an efficient hydrogen isotope separation catalyst in proton exchange membrane water electrolysis

The cathodic catalysts of Pt/C (20 wt%, 2–3 nm) and Au/C (20 wt%, 4–5 nm) were purchased from SCI Materials Hub.


2. Small Science Silver Compositing Boosts Water Electrolysis Activity and Durability of RuO2 in a Proton-Exchange-Membrane Water Electrolyzer

Two fiber felts (0.35 mm thickness, SCI Materials Hub) were used as the porous transport layers at both the cathode and the anode.


3. Advanced Functional Materials Hierarchical Crystalline/Amorphous Heterostructure MoNi/NiMoOx for Electrochemical Hydrogen Evolution with Industry-Level Activity and Stability

Anion-exchange membrane (FAA-3-PK-130) was obtained from SCI Materials Hub.


4. Chemical Engineering Journal Electronic configuration of single ruthenium atom immobilized in urchin-like tungsten trioxide towards hydrazine oxidation-assisted hydrogen evolution under wide pH media

The non-reinforced anion exchange membrane (AEM) of the coupled system was obtained from SCI Materials Hub (Fumasep FAA-3-50).


5. Cell Reports Physical Science Non-layered dysprosium oxysulfide as an electron-withdrawing chainmail for promoting electrocatalytic oxygen evolution

Nickel foam (NF) was offered by SCI Materials Hub (Wuhu, China), and was ultrasonicated in HCl solution, ethanol, and acetone in proper order before being used in electrochemical measurements.


6. Materials Today Catalysis Valence engineering via double exchange interaction in spinel oxides for enhanced oxygen evolution catalysis

Commercial Cu foam was purchased from SCI Materials Hub.


7. Advanced Functional Materials Elucidating the Critical Role of Ruthenium Single Atom Sites in Water Dissociation and Dehydrogenation Behaviors for Robust Hydrazine Oxidation-Boosted Alkaline Hydrogen Evolution

The nonreinforced anion exchange membrane (AEM) of the HzOR-assisted OWS system was purchased from SCI Materials Hub (Fumasep FAA-3-50).


8. ACS Omega Boosting Hydrogen Evolution through the Interface Effects of Amorphous NiMoO4–MoO2 and Crystalline Cu

Pt/C (20 wt %) was purchased from SCI Materials Hub.


9. Journal of Colloid and Interface Science The Dual Active Sites Reconstruction on Gelatin In-Situ Derived 3d Porous N-Doped Carbon for Efficient and Stable Water Splitting

Nafion D521 was purchased from SCI Materials Hub.


10. Molecules Interfacial Interaction in NiFe LDH/NiS2/VS2 for Enhanced Electrocatalytic Water Splitting

Carbon cloth (SCI Materials Hub) were employed as substrates for the in-situ formation of VS2 and NiS2/VS2 on its surface via hydrothermal synthesis.


11. Chemical Engineering Journal Mapping hydrogen evolution activity trends of V-based A15 superconducting alloys

Carbon fiber paper (GDS250) was obtained from the SCI materials Hub.


12. Advanced Science A Dual-Cation Exchange Membrane Electrolyzer for Continuous H2 Production from Seawater

The CEMs include GORE-SELECT Gore M788.12 (W. L. Gore & Associates, America) and FUMA Fumasep FKB-PK-130 (FuMa Tech., Co., Ltd., Germany) were provided by SCI Materials Hub.


13. Ind. Eng. Chem. Res. Electrolysis of Tertiary Water Effluents - a Pathway to Green Hydrogen

The PEM electrolyzer stack PSC2000 was purchased from the SCI Materials Hub with a maximum hydrogen production capability of 2000 mL/min. The stack had 8 electrolysis cells with a maximum recommended operation current of 36 A and a voltage of 24 V. Its membrane electrode assembly had an effective area of 56 cm2 per layer and a catalyst loading of 4.0 mg/cm2 on Nafion 117 for Ir black as anode and Pt/C as cathode, respectively. The catalysts were deposited on the Nafion membrane to form a catalyst-coated membrane. Titanium bipolar plates were used to construct the electrolyzer. Water is supplied to the anode side of the electrolyzer stack during operation.


14. Adv. Energy Mater. High-Efficiency Iridium-Yttrium Alloy Catalyst for Acidic Water Electrolysis

Carbon paper (Toray TGP-H-060) was purchased from the SCI Materials Hub.


15. Journal of Alloys and Compounds Amorphous/Crystalline Nife Ldh Hierarchical Nanostructure for Large-Current-Density Electrocatalytic Water Oxidation

The commercial NiFe foam (NFF) was offered by SCI Materials Hub.


16. Nanoscale Modulating the electronic structure of VS2 via Ru decoration for efficient pH-universal electrocatalytic hydrogen evolution reaction

W0S1009 Carbon cloth (CC, SCI Materials Hub) were employed as substrate for the in-situ formation of Ru-VS2 and VS2 on its surface via hydrothermal synthesis.


17. Journal of Colloid and Interface Science The dual active sites reconstruction on gelatin in-situ derived 3D porous N-doped carbon for efficient and stable overall water splitting

Nafion D521 was purchased from SCI Materials Hub.


18. Journal of Physics and Chemistry of Solids AgCo bimetallic cocatalyst modified g-C3N4 for improving photocatalytic hydrogen evolution

Nafion D520 dispersion (5 wt%) was purchased from SCI Materials Hub.


19. Separation and Purification Technology NiP2 as an efficient non-noble metal cathode catalyst for enhanced hydrogen isotope separation in proton exchange membrane water electrolysis

Ni supported on Vulcan XC-72, obtained from SCI materials Hub.


20. ACS Appl. Nano Mater. Rapid Electrical-Field-Enhanced Corrosion Endows Ni3Fe/NiFe Layered Double Hydroxide Nanosheets with High-Rate Oxygen Evolution Activity

The Ni3Fe substrate obtained directly from a commercial NiFe foam (nominal Ni 70% at. % + Fe 30 at. %, thickness: 2 mm, porosity: 100 PPI, SCI Materials Hub) was cleaned with acetone, ultrapure water, and ethanol successively and was dried with compressed air.


21. eScience Porous PVA skin-covered thin Zirfon-type separator as a new approach boosting high-rate alkaline water electrolysis beyond 1000 hours’ lifespan

The proposed thin V-Zirfon separator samples were evaluated at first by water electrolysis at 60 °C using a two-compartment zero-gap electrolyzer (LSCF Alkaline Water Electrolyzer stack [1 cell], purchased from SCI Materials Hub).


22. ACS Materials Lett. Promoting Nonacid Hydrogen Evolution over Ni4Mo/Cu by D-Band Regulation

Commercial Pt/C (20%) from Wuhu Eryi Material Technology Co., Ltd.

Note: Wuhu Eryi Material Technology Co. is a company hold by SCI Materials Hub.


23. Molecules Interfacial Interaction in NiFe LDH/NiS2/VS2 for Enhanced Electrocatalytic Water Splitting

Carbon cloth (CC, SCI Materials Hub) were employed as substrates for the in-situ formation of VS2 and NiS2/VS2 on its surface via hydrothermal synthesis.


24. Nat. Commun. Flexible tungsten disulfide superstructure engineering for efficient alkaline hydrogen evolution in anion exchange membrane water electrolysers

Commercial IrO2, Pt/C (40 wt%), anion exchange membrane (Sustainion X37-50 Grade 60) and carbon fiber cloth (CFC) were obtained from SCI Materials Hub.


25. International Journal of Hydrogen Energy Enhancing performance of anion exchange membrane electrolyzer through modification of carbon paper liquid-gas diffusion layer

The anode is made of Ni–Fe foam (60% Fe + 40% Ni, SCI Materials Hub, China), while the cathode is made of carbon paper electrode. AEM employed is the highly stable PiperION™-A40-HCO3 (with a thickness of 40 μm).


26. Nature Communications Rationally designed Ru catalysts supported on TiN for highly efficient and stable hydrogen evolution in alkaline conditions

Fumasep FAAM-20 anion exchange membrane was purchased from SCI Materials Hub.


27. Nature Communications Redox-mediated decoupled seawater direct splitting for H2 production

Nickel foam (Ni Foam, aperture: 110 ppi, area density: 380 ± 20 g cm−2), platinum carbon (Pt/C, 20 wt%), anion exchange membranes (FAA-3-PK-75), graphite felt (thickness: ~2 mm), and commercial alkaline water electrolyzers were purchased from SCI Materials Hub.


28. ACS Applied Materials & Interface Promoting Reaction Kinetics of the Air Cathode for Neutral Zinc–Air Batteries by the Photothermal Effect

Carbon paper (SGL Carbon Sigracet 22BB) was purchased from SCI Materials Hub.


29. International Journal of Hydrogen Energy Efficient and stable formaldehyde-polyoxometalate battery for dual-decoupled hydrogen production

Firstly, the surface of the Cu foam (1 × 1 cm2, Sci Materials Hub Co.) was oxidized into Cu(OH)2 nanowires (denoted as sample Cu(OH)2 NWs/Cu foam) by (NH4)2S2O8 (0.13 M) in 2.67 M NaOH aqueous solution for 30 min at room temperature.


30. International Journal of Hydrogen Energy Controlled deposition of trimetallic Fe–Ni–V oxides on nickel foam as high-performance electrocatalysts for oxygen evolution reaction

Nickel foam (95–98% porosity, 40 pores/cm), manufactured by SCI Materials Hub, was employed for catalyst fabrication.


31. Journal of Alloys and Compounds Cobalt-doping mediated low-valence Rh centers in rhodium sulfide superconductor for improved electrocatalytic hydrogen evolution

Carbon fiber paper (Spectracarb 2050 A, thickness of 10μm, density of 0.50 g cm−3) was purchased from SCI Materials Hub.


32. J. Mater. Chem. A Promoted surface reconstruction of amorphous nickel boride electrocatalysts by boron dissolution for boosting oxygen evolution reaction

The ink was also sprayed onto a 1.5 mm-thick Ni foam substrate (SCI Materials Hub, China).


33. Advanced Energy Materials Surface Reconstruction Activates Non-Noble Metal Cathode for Proton Exchange Membrane Water Electrolyzer


34. J. Mater. Chem. A Multimetallic layered double hydroxides as efficient and durable oxygen evolution catalysts for anion exchange membrane water electrolysis at high current densities


35. Nano Research Hierarchical NiFe LDH/N-doped Co/nickel foam as highly active oxygen evolution reaction electrode for anion exchange membrane water electrolysis

Commercial PtRu/C and RuO2 were purchased from SCI Materials Hub.


36. J. Mater. Chem. A Ga doping Enhances Oxygen Evolution Reaction Performance and stability of NiFe layered double hydroxides

Nickel foam (NF) was purchased from SCI Materials Hub (99.9%,bore diameter 200-250um, thickness 0.3mm).


37. Journal of Industrial and Engineering Chemistry Optimizing CoFe2O4 coatings on nickel foam via Aerosol-Assisted CVD for superior electrochemical oxygen evolution Catalysis

To fabricate the catalyst, we used nickel foam (95–98 % porosity, with 40 pores/cm) produced by SCI Materials Hub


38. International Journal of Hydrogen Energy Experimental and simulation study of H2 crossover in PEM water electrolysis for high-pressure hydrogen production up to 20 MPa

The high-pressure PEMWE cell used a PFSA membrane (Nafion® 117, DUPONT) coated with 0.75 mg cm−2 of Pt/C (40 %, JOHNSON MATTHEY) on the cathode and 1 mg cm−2 of IrO2 (Accelerate®, SCI-MATERIALS HUB) on the anode.


39. Journal of Alloys and Compounds Ruthenium-mediated synthesis of ultrafine FePtCoNiRu high-entropy alloy nanoparticles for enhanced hydrogen evolution catalysis

Vulcan XC-72R (Ketjen Black) was purchased from SCI Materials Hub.


40. Nano-Micro Letters A Strongly Coupled Cluster Heterostructure with Pt–N-Mo Bonding for Durable and Efficient H2 Evolution in Anion-Exchange Membrane Water Electrolyzers
Carbon paper and anion-exchange membrane (PiperION A40) were obtained from SCI Materials Hub.


41. Journal of Alloys and Compounds N, P-doped coconut shell activated carbon supported Mo2C catalysts for alkaline water electrolysis hydrogen evolution

Nafion solution (D520, 5 wt%) was obtained from SCI Materials Hub.


42. Nature Communications Lanthanum-assisted lattice anchoring of iridium in Co3O4 for efficient oxygen evolution reaction in low-iridium water electrolysis

Carbon paper was obtained from SCI Materials Hub.


43. Nanoscale Two-dimensional 1T-phase MnxIr1−xO2 for high-performance acidic oxygen evolution reaction

Commercial Nafion NR212 films were purchased from SCI Materials Hub.


44. Journal of Physics: Conference Series Stability and durability of nickel-molybdenum foam electrodes in electrocatalytic seawater splitting

The Materials used in the present investigation were prepared by SCI Materials Hub.


电 催 化

1. Nature Communications Electrochemical epoxidation enhanced by C2H4 activation and hydroxyl generation at the Ag/SnO2 interface
Fumion FAA anion exchange resin and FAA-3-50 membranes with a thickness of 50 µm were purchased from SCI Materials Hub.

燃料电池

1. Polymer Sub-two-micron ultrathin proton exchange membrane with reinforced mechanical strength

Gas diffusion electrode (60% Pt/C, Carbon paper) was purchased from SCI Materials Hub.


2. Polymer Development of rigid side-chain poly(ether sulfone)s based anion exchange membrane with multiple annular quaternary ammonium ion groups for fuel cells

Fumion FAA-3-solut-10 was obtained from SCI Materials Hub.


3. Journal of Power Sources Boosting the power density of the H3PO4/polybenzimidazole high-temperature proton exchange membrane fuel cell to >1.2 W cm-2 via the deposition of acid-based polymer layers on the catalyst layers

PBI resin (molecular weight: 60000, SCI Materials Hub), carbon paper 39BB (SGL Carbon), 70 wt% Pt/C (TANAKA) were obtained from SCI Materials Hub.


4. SSRN Bulky and Rigid Spiro-Adamantane-Fluorene Unit Promoted Microphase Separation in Di-Cation Side Chain Grafted Anion Exchange Membrane

Fumasep FAA-3-20 was obtained from SCI Materials Hub.


5. ACS Sustainable Chem. Eng. Vanadium-Mediated High Areal Capacity Zinc–Manganese Redox Flow Battery

Zinc plate (thickness 1 mm), copper foam (thickness 1.5 mm), and Ketjenblack (KB) EC-600JD were procured from SCI materials hub.


6. ACS Appl. Energy Mater. Investigation of Pd2B- and NiB-Doped Pd–Ni/C Electrocatalysts with High Activity for Methanol Oxidation

Nafion solution (5 wt %, DuPont) was purchased from SCI Materials Hub.


7. Chemical Engineering Journal Loosened Hydrophobic Microphase to Facilitate Ion Channel Formation in Anion Exchange Membrane for Fuel Cell Applications

Fumasep FAA-3-20 was obtained from SCI Materials Hub.


8. Energy Conversion and Management: X Amplified impact of contact uniformity on the performance of low-catalyst-loading fuel cells

Commercial Pt/C (weight ratio of Pt, 5 %), commercial Pt/C (weight ratio of Pt, 10 %), carbon black (Ketjenblack EC-300 J), the expanded polytetrafluoroethylene (ePTFE) reinforced proton exchange membranes (PEM) (manufactured by GORE), and GDL were purchased from SCI Materials Hub.


9. ACS Sustainable Chemistry & Engineering Lignin-Derived Sustainable Cationic Polymers for Efficient High-Temperature Proton Exchange Membrane Fuel Cells

Poly-2,2′-(m-phenylene)-5,5′-bibenzimidazole (PBI, Figure 1a) [(MW)RU ∼ 308 g/mol, Mw ∼ 60,000 g/mol, Tg ∼ 427 °C] was purchased from SCI Materials Hub (China).


10. Journal of Energy StorageAnion-type solvation structure enables stable zinc‑iodine flow batteries

The Nafion 115 produced by Dupont was purchased from SCI Materials Hub and pretreated by the standard acid boiling procedure.


11. Chemical Engineering Journal A novel biofuel cell based on galactose oxidase and bilirubin oxidase for efficient glycerol conversion and electricity generation

W1S1011 carbon cloth (CC) with PTFE&MPL (CeTech) was purchased from SCI Materials Hub (China).


12. ACS Nano Improving Fuel Cell Performance of FeNx-Based Catalysts by Introducing Graphitic Microdomains in the Carbon Matrix


13. Science Advances Manipulating the coordination dice: Alkali metals directed synthesis of Co-N-C catalysts with CoN4 sites

A Nafion D521 dispersion (5 wt %, equivalent weight = 1100), PtRu-C (60% PtRu on high–surface area carbon, Pt:Ru = 1:1, SCI Materials Hub), an alkaline ionomer dispersion (PiperION-A5-HCO3-EtOH, 5 wt %, Versogen Inc.), and anion exchange membrane (PiperION-A type-HCO3, Versogen Inc.) were obtained from SCI Materials Hub.


催化-ORR

1. J. Chem. Eng. Superior Efficiency Hydrogen Peroxide Production in Acidic Media through Epoxy Group Adjacent to Co-O/C Active Centers on Carbon Black

In this paper, Vulcan XC 72 carbon black, ion membrane (Nafion N115, 127 μL), Nafion solution (Nafion D520, 5 wt%), and carbon paper (AvCarb GDS 2230 and Spectracarb 2050A-1050) were purchased from SCI Materials Hub.


2. Journal of Colloid and Interface Science Gaining insight into the impact of electronic property and interface electrostatic field on ORR kinetics in alloy engineering via theoretical prognostication and experimental validation

The 20 wt% Pt3M (M = Cr, Co, Cu, Pd, Sn, and Ir) were purchased from SCI Materials Hub. This work places emphasis on the kinetics of the ORR concerning Pt3M (M = Cr, Co, Cu, Pd, Sn, and Ir) catalysts, and integrates theoretical prognostication and experimental validation to illuminate the fundamental principles of alloy engineering.


3. Catalysis Solution-Phase Synthesis of Co-N-C Catalysts Using Alkali Metals-Induced N-C Templates with Metal Vacancy-Nx sites

In this paper, PtRu-C (60 % PtRu (3.5nm) on High Surface Area Carbon, Pt:Ru = 1:1, SCI Materials Hub), an alkaline dispersion (PiperION-A5-HCO3-EtOH, 5 wt.%, SCI Materials Hub), anion exchange membrane (PiperION-A type-HCO3, SCI Materials Hub) were used as received.


4. Green Chemistry Low Cell Voltage Electrosynthesis of Hydrogen Peroxide

The proton exchange membranes (Nafion-117, 211, and 212) were from SCI Materials Hub. They were pre-treated by 5 v/v% H2O2 solution for 1 h at 80°C and then treated by 10 v/v% H2SO4 aqueous solution for 1 h at 80°C before assembling to flow cell reactor.


5. Chemosphere Sustainable H2O2 production in a floating dual-cathode electro-Fenton system for efficient decontamination of organic pollutants

Ketogen black (EC-600JD) was purchased from SCI Materials Hub.


6. Journal of Materials Science Carbon dot intercalated MXene with an excellent oxygen reduction reaction electrocatalytic performance

Nafion (5 wt%) was purchased from SCI Materials Hub (Nafion D520).


7. Nature Commuinications Precisely designing asymmetrical selenium-based dual-atom sites for efficient oxygen reduction

Vulcan XC-72R carbon black (CAS No.: 1333-86-4, SCI Materials Hub).


8. ChemElectroChem Balancing the Aggregation of Cobalt Phthalocyanine on Carbon Nanohorn for Efficient H2O2 electrosynthesis in Neutral Electrolyte

AvCarb GDS 2230 substrates and Nafion 1110 membranes were purchased from Sci Materials hub.


9. Small Science Electrosynthesis of Hydrogen Peroxide at Industrial-Level Current Density in Flow-Cell System: Interfacial Microenvironment Regulation and Catalyst Design

Nafion solution (D520, 5 wt%) and proton exchange membrane (PEM, Nafion N117) were purchased from Sci Materials Hub.


10. Fuel Laser direct writing of graphene-encapsulated MoNi4 nanoparticles on carbon cloth as a self-supporting electrode for enhanced electrochemical urea oxidation

Carbon cloth (W0S1011) was purchased from SCI Materials Hub.


11. Nature Portfolio Carbon defects enhanced TEMPO redox cycles for high-efficiency urotropine electrosynthesis

TGPH060H hydrophilic carbon paper (CP), VXC-72 carbon black (CB), nickel foam, Nafion D520 dispersion, Nafion N117, and Fumasep FAA-3-PK-75 were gained from SCI Materials Hub.


12. American Institute of Chemical Engineers A tandem electro-thermocatalysis platform for practical hydrogen peroxide-mediated oxygenation reactions at high rates

Sustainion ionomerbinder solution and anion-exchange membrane (AEM, SustainionX37-50 grade 60) was purchased from SCI Materials Hub.


13. Journal of Environmental Chemical Engineering Metal-free heterogeneous electro-Fenton with solid polymer electrolytes: A novel self-supporting system for PPCPs decontamination

Industrial-grade graphite felt (GF) and solid polymer electrolytes (Nafion®N324, N438, N117, and N115) were procured from SCI Materials Hub.


14. Physical Chemistry Chemical Physics Tailoring LaBO3 (B = Mn, Fe, Co, Ni) perovskite oxides for methanol-tolerant oxygen reduction reaction electrocatalysts
Nafion D520 dispersion (5 wt%) was obtained from SCI Materials Hub.


15. Nano Research Surface diffusion-Limited dealloying: A strategy for porosityconstruction in small-sized alloy nanoparticle electrocatalysts
Commercial 20%Pt/C (TKK-TEC-10E20E) was obtained from SCl MaterialsHub.


电容器

1. Journal of Energy Storage Unraveling the detrimental crosstalk between cathode and anode in the aqueous asymmetric capacitor of activated carbon /copper oxide

In this paper, Fumasep FAA-3-50 anion exchange membrane (Thickness 50 μm, surface resistance 0.6–1.5 Ω cm−2, transference number 92–96 %) was bought from SCI Materials Hub.


2. Composites Science and Technology High modulus carbon fiber based composite structural supercapacitors towards reducing internal resistance and improving multifunctional performance

The aluminium tape (Wuhu Eryi Materials Co. LTD) were used as the current collectors.

Note: Wuhu Eryi Material Technology Co. is a company hold by SCI Materials Hub.


3. Polymer One-pot synthesis of hydroxypropyl methylcellulose-based gel polymer electrolytes for high-performance supercapacitors

Carbon cloth (CeTech W0S1011) was sourced from SCI Materials Hub.


4. ACS Applied Materials & Interfaces Green Polymer Derived Multifunctional Layer Achieving Oriented Diffusion and Controllable Deposition of Zn2+ for Ultra-Durable Zinc-Ion Hybrid Supercapacitors

Zn foil (99.99%) and Copper foil (99.99%) was purchased from SCI Materials Hub.


5. Journal of Water Process Engineering Enhanced electrodialysis by electric double-layer capacitors to minimize membrane use in digestate ammonia recovery: mechanisms and effects

Carbon cloth (W0S1011, >98 %), cation-exchange membrane (FKB-PK-130, with a thickness of 130 μm) were purchased from SCI Materials Hub.


6. ACS Applied Materials & Interfaces Mechano-Electrochemical Synergy of Lignin Cross-Linked PVA Gel Polymer Electrolytes for Wide-Temperature Flexible Supercapacitors

Raw carbon cloth (CeTech W0S1009) was acquired from SCI Materials Hub


催化加氢

1. Nature Communications Electrosynthesis of polymer-grade ethylene via acetylene semihydrogenation over undercoordinated Cu nanodots

In this paper, activated carbon (Vulcan XC-72) was obtained from SCI Materials Hub.


2. Applied Catalysis B: Environment and Energy Spatial-confined effect of CuOx microneedles bundles on TiO2 nanotubes: Reinforcing the adsorption and enrichment of ultralow concentration nitrate for efficient NH3 electrosynthesis

Ion membrane (Nafion N115, 127 μL) was purchased form Sci Materials Hub.


3. Nature Communications Electrosynthesis of NH3 from NO with ampere-level current density in a pressurized electrolyzer

The anion exchange membrane (Fumasep FAB-PK-130, 130 μm) was purchased from SCI Materials Hub.


4. Sustainable Energy Fuels Dibenzyl ether-guided microstructural regulation of PtIrZn catalysts for ammonia electrocatalysis


5. Chemical Engineering Journal Enhanced electrocatalytic nitrate reduction to ammonia via boron-doped copper foam

Ni foam was purchased from the Sci Materials Hub Co., Ltd. (Anhui, China).

6. Nature Communications Modulating Ru-Co bond lengths in Ru1Co single-atom alloys through crystal phase engineering for electrocatalytic nitrate-to-ammonia conversion

Nafion 211 membrane (diameter: 3 cm, thickness: 25.4 μm) was purchased from SCI Materials Hub.


7. Nature Communications Revealing and modulating catalyst reconstruction for highly efficient electrosynthesis of ammonia

Toray Carbon Paper (CP, TGP-H-060), Nafion 211 membrane, Nafion N117 membrane, and membrane electrode device were obtained from the Sci materials hu


8. Preparation of Ultra-Micropore-Rich Porous Carbon Materials Via Control of Dimension-Reduction Carbonization and Induction by Cascade Activation for High-Performance Supercapacitors

Hydrophilic carbon paper and carbon black, carbon rod electrode was purchased from SCI Materials HUB


9. Separation and Purification Technology A novel membrane-free ion enrichment electrolyzer recovers ammonia from digestate

Carbon cloth (W0S1011, >98 %), cation-exchange membrane (FKB-PK-130, with a thickness of 130  μm), and anion-exchange membrane (FAS-PET-130, with a thickness of 130  μm) were purchased from SCI Materials Hub.


水处理

1. Water Research Electro-peroxone with solid polymer electrolytes: A novel system for degradation of plasticizers in natural effluents

In this paper, Nafion® N324 (SCI Materials Hub), between a 15 cm2 (3 cm × 5 cm) graphite plate anode and a graphite felt cathode (EP-SPE system)


表征

1. Chemical Engineering Journal Electrochemical reconstitution of Prussian blue analogue for coupling furfural electro-oxidation with photo-assisted hydrogen evolution reaction

An Au nanoparticle film was deposited on the total reflecting plane of a single reflection ATR crystal (SCI Materials Hub, Wuhu, China) via sputter coater.


理论计算

1. Sustainable Energy & Fuels A desulfurization fuel cell with alkali and sulfuric acid byproducts: a prototype and a model

A Fumasep®FKD-PK-75 membrane was used as the cation exchange membrane, in which the the oxygen permeability of membrane was about 1 cm3(STP)/(s cm2 cm Hg) [Ref. SCI Materials Hub]


器件

1. Journal of Materials Science: Materials in Electronics Preparation and application of electrical conductive composites with skin temperature-triggered attachable and on-demand detachable adhesion

Carbon black (CB, Ketjenblack EC 600JD) was purchased from SCI Materials Hub.


2. Chemosphere Highly Sensitive Electrochemical Sensor for Lead Ion Based on Bi-Mof/Conducting Polymer Composites

Nafion D520 Dispersion (Alcohol based 1000 EW at 5wt%) was purchased from SCI Materials Hub.


3. ACS Nano High-Performance Graphdiyne Oxide/Au Nanoparticle Electrode for Electrochemical Non-enzymatic Glucose Sensor

Carbon cloth was purchased from SCI Materials Hub (CeTech W0S1011).


材料合成

1. Acta Materialia In situ epitaxial thickening of wafer-scale, highly oriented nanotwinned Ag on tailored polycrystalline Cu substrates

Single-crystal Cu (1 cm × 1 cm) substrates with a (111) orientation were purchased from SCI Materials Hub.


2. Journal of The Electrochemical Society One-Pot Electrodeposition of a PANI:PSS/MWCNT Nanocomposite on Carbon Paper for Scalable Determination of Ascorbic Acid

Raw carbon paper was purchased from SCI Materials Hub


3. Polymer Composites Constructing High-Performance Composite Bipolar Plates via Multidimensional Carbon Networks

KB (EC-600JD), Acetylene black (CB11), and Carbon black (XC-72) were purchased from SCI Materials Hub


催化降解

1. Journal of Environmental Chemical Engineering Conversion of CoNiFe-LDH to CoNiFe-MOF/LDH as catalyst for efficient heterogeneous electro-Fenton degradation of sulfonamide antibiotics

The hydrophobic microporous laminated carbon paper (HML-CP) (2 cm × 2.5 cm) was chosen as a cathode and fabricated by Wuhu Eryi Material Technology Co. (Anhui, China).

Note: Wuhu Eryi Material Technology Co. is a company hold by SCI Materials Hub.


2. Nature Communications Scale-up upcycling of waste polyethylene terephthalate plastics to biodegradable polyglycolic acid plastics

Nickle foam (NF) and Nafion N117 were obtained from SCI Materials Hub.


催化电解

1. Chemical Engineering Journal Modulation of energy barrier of reaction steps over S-doped Ni(OH)2/Cu composites to achieve high-performance urea electrolysis catalysts

Commercial Pt/C (20 wt%) was purchased from Wuhu Eryi Material Technology Co., LTD.

Note: Wuhu Eryi Material Technology Co. is a company hold by SCI Materials Hub.


2. Chemical Engineering Journal Efficient Catalysis for Acidic Methanol Oxidation: Exploration of a Low-Platinum Quaternary Alloy Catalyst Via a Two-Step Method

Nafion (5%) was purchased from SCI Materials Hub.


环 境

1. Journal of Materials Research and TechnologyTribocorrosion performance of TC4 anodized/carbon fiber composite in marine environment

Carbon fiber cloth WOS1011H(M) purchased from Wuhu Eryi Materials Technology Co.

Note: Wuhu Eryi Material Technology Co. is a company hold by SCI Materials Hub.


2. Adv. Funct. Mater. Modulating NFO@N-MWCNTs/CC Interfaces to Construct Multilevel Synergistic Sites (Ni/Fe-O-N-C) for Multi-Heavy Metal Ions Sensing

Carbon cloth (W0S1011) was acquired from SCI Materials Hub (www.scimaterials.cn).


热 电

1. Chemical Engineering Journal High power density charging-free thermally regenerative electrochemical flow cycle for low-temperature thermoelectric conversion

The heat exchangers are composed of 20 μm thick titanium foil (SCI Materials Hub), 1 mm thick rubber gasket and 2 cm thick organic glass from the inside to the outside.


其 它

1. Ceramics International Superhydrophobic carbon fiber composite coatings based on TC4 titanium alloy for improving corrosion resistance

Carbon fiber cloth was purchased from SCI Materials Hub.


2. Electrochimica Acta Integrated electrochemically assisted absorbers for the removal of Carbon dioxide

39 BB carbon paper was obtained from SCI Materials Hub.


3. Journal of Hazardous Materials Chain assembly of Rhodococcus bacteria with O-doped g-C3N4 for photocatalysis mediated high-performance partial nitrification: From nitrite resource evolution to device application

Fumasep FAA-3-PK-130, diameter 30 mm, was purchased from SCI Materials Hub.


4. Nature Communications High selectivity framework polymer membranes chemically tuned towards fast anion conduction

Sustainion® X37-50 Grade RT membrane was purchased from SCI Materials Hub, and was pretreated by soaking in 1 M KOH for 24 h according to a reported procedure.


5. Polymer Composites Constructing High-Performance Composite Bipolar Plates via Multidimensional Carbon Networks

KB (EC-600JD), Acetylene black (CB11), and Carbon black (XC-72) were purchased from SCI Materials Hub Co. Ltd. China.

相关产品

为科学研究提供来源广泛的材料
材料合成仪器装置及材料解决方案
备案号:皖ICP备2021011042号-1
关于我们
产品咨询
客服1
客服2
售后与技术咨询
客服1
客服2
微信客服

返回顶部