欢迎来到科学材料站!
首页 > 滤膜滤纸及配件 > Millipore滤膜 > Millipore Isopore 聚碳酸酯(PC)亲水滤膜

Millipore Isopore 聚碳酸酯(PC)亲水滤膜

  • 产品代码:VCTP, GTTP, GTBP, HTTP, DTTP, ATTP, RTTP, TTTP, TSTP, TMTP, TETP, TCTP
  • 产品描述:Millipore Isopore Polycarbonate Hydropholic Membrane Filter
  • 品牌:Millipore
  • 货期:请咨询
  • 浏览次数:
  • 咨询电话:+86 130-0303-8751
  • 关键词:Millipore Isopore 聚碳酸酯亲水滤膜, SCI Materials Hub, 科学材料站

Millipore Isopore™ 聚碳酸酯(PC)亲水滤膜产品博客

一、产品概述

Millipore Isopore™ 聚碳酸酯(PC)亲水滤膜是一类聚碳酸酯径迹蚀刻筛选型滤膜,适合用于“颗粒保留在膜表面并直接观察”的分析场景,例如空气颗粒物分析、颗粒计数、荧光显微镜、趋化性实验、微塑料分析及微生物检测等。Isopore™ 膜由聚碳酸酯薄膜制成,表面平滑、近似玻璃状,有利于降低观察背景、提升显微分析清晰度。官方资料显示,Isopore™ 膜的制造工艺可实现较精确的孔径与一致的孔径分布,适合按颗粒尺寸进行分离与分析。

Millipore® 与 Sigma-Aldrich® 均属于 Merck KGaA, Darmstadt, Germany 生命科学业务体系下的重要品牌;科学材料站与 Merck Sigma-Aldrich 合作,代理经销其全系列产品,可为科研、检测、环境监测、材料分析及工业质控客户提供选型、货号核对与订购支持。Merck 官方页面也将 Millipore®、Sigma-Aldrich®、SAFC®、Supelco®、Milli-Q® 等列为其生命科学品牌体系。


二、产品核心卖点

卖点说明
表面截留,便于观察筛选型结构可将颗粒主要保留在膜表面,适合显微镜计数、颗粒形貌分析、污染物观察。
背景低,不易染色Isopore™ 膜不易染色,可降低背景干扰,适合对颗粒、细胞、微塑料等进行表面观察。
亲水性,易用于水相样品亲水聚碳酸酯膜适合水样、缓冲液、微生物检测液及部分环境样品过滤。
半透明,便于透射光观察半透明材料通常无需透明处理即可用于透射光显微镜观察,部分型号也提供棕色规格。
非吸湿,干燥快非吸湿特性有助于快速干燥,减少样品分析等待时间。
孔径范围广系列孔径覆盖 0.1–10 μm,可用于细颗粒、微生物、细胞迁移、空气颗粒物及微塑料等不同尺度分析。

三、产品参数对比表

1)Isopore™ 系列通用参数

参数Millipore Isopore™ 聚碳酸酯(PC)亲水滤膜
品牌Millipore / Isopore™
材质聚碳酸酯 Polycarbonate(PC)
滤膜类型径迹蚀刻筛选型滤膜 / Screen Filter
亲疏水性亲水 Hydrophilic
孔径范围0.1–10 μm
厚度21–27 μm
孔隙率5–10%(不同孔径型号会有差异)
折射率1.6
水流速0.5–250 mL/min/cm² @10 psi
空气流速1.3–72 L/min/cm² @10 psi
最高使用温度140 °C max;高温或灭菌后流速可能降低
灭菌方式高压蒸汽灭菌、环氧乙烷 EtO、伽马辐照
表面颜色白色、棕色
典型应用颗粒分析、空气监测、显微镜观察、细胞迁移/趋化性分析、荧光分析、细胞与颗粒物按尺寸分级
常见形式滤膜片、Millicell® 板/插件、MultiScreen® 板等相关耗材形式

以上通用参数来自 Merck/Sigma-Aldrich 微孔过滤指南及 Isopore™ 产品资料;不同孔径、直径、颜色和包装规格的具体参数应以对应货号页面与 COA/COQ 文件为准。

2)常见孔径与货号系列对比

孔径常见货号系列颜色/类型典型用途建议
0.22 μmGTTP白色亲水 PC 膜微细颗粒截留、细菌相关样品过滤、精细颗粒分析
0.4 μmHTTP / HTBPHTTP 白色;HTBP 棕色微生物检测、饮用水微生物分析、空气/颗粒监测、微塑料分析
0.8 μmATTP白色亲水 PC 膜大颗粒截留、空气颗粒、细胞相关样品预分级
1.2 μmRTTP白色亲水 PC 膜颗粒分析、细胞迁移、较大悬浮颗粒分级
2.0 μmTTTP白色亲水 PC 膜细胞/颗粒物尺寸分离、颗粒物表面观察
3.0 μmTSTP白色亲水 PC 膜颗粒物收集、空气监测、细胞迁移相关实验
5.0 μmTMTP白色亲水 PC 膜较大颗粒、细胞迁移、趋化性实验、尺寸分级
10.0 μmTCTP白色亲水 PC 膜大颗粒分级、细胞/颗粒物筛选、样品预处理

Sigma-Aldrich 产品列表中可见 HTTP04700、GTTP02500、GTTP04700、TSTP02500、TMTP02500、TCTP04700、RTTP04700、TTTP04700、ATTP04700 等常见规格;不同孔径对应的孔隙率、直径和包装数量会随货号变化。


四、应用场景

1)空气监测与颗粒物分析

Isopore™ 膜适用于空气中污染物和颗粒物的收集与后续显微观察。由于颗粒主要截留在膜表面,样品不易被膜内部结构遮挡,便于对颗粒数量、形貌、尺寸和分布进行分析。官方资料明确将 Air Monitoring 列为 Isopore™ 的典型应用。

2)荧光显微镜与表面观察

Isopore™ 膜低背景、表面平滑,适合荧光显微镜、透射光显微镜及电子显微镜观察。对于需要“过滤后直接在膜表面观察”的样品,如颗粒物、微塑料、细胞迁移样品,Isopore™ 比许多深层截留型滤膜更容易获得清晰图像。

3)趋化性分析与细胞迁移实验

Isopore™ 膜在官方资料中被列为可用于 Chemotaxis Assays,即趋化性分析。其窄孔径分布、明确孔径结构和薄膜特性,有利于细胞迁移实验中对孔径、通道和迁移行为进行控制。

4)微生物与水质检测

0.4 μm Isopore 聚碳酸酯膜可用于制药、水监测、临床实验室、食品饮料、工业质控和环境样品中的一般微生物分析。Microfil® with Isopore 页面也列出了 bioburden testing、clinical、environmental、food and beverages、industrial QC、pharmaceutical、water monitoring 等应用。

5)微塑料与环境样品分析

Isopore™ 0.4 μm 产品资料列出 microplastics analysis、particle monitoring、air monitoring、drinking water microbes analysis 等应用;对于微塑料、沉积物洗脱液、饮用水和环境水样,PC 膜的低背景和表面截留特性有利于后续显微识别。


五、使用方法

1)选型建议

实验目标推荐选择逻辑
微细颗粒或微生物截留选择 0.22 μm 或 0.4 μm,适合细颗粒、微生物、水样分析。
空气颗粒物观察根据目标颗粒粒径选择 0.4–5.0 μm,优先考虑后续显微镜观察清晰度。
细胞迁移/趋化性实验根据细胞大小和迁移模型选择 3.0、5.0 或 8.0/10.0 μm 等较大孔径。
微塑料分析根据目标微塑料尺寸选择 0.4、0.8、1.2、2.0 或更大孔径,避免过细孔径导致堵膜。
需要低背景观察优先选择白色或棕色 Isopore™,具体颜色依据显微观察方式与对比度需求确定。

2)标准过滤步骤

步骤操作说明
第一步:确认规格根据样品类型、目标颗粒尺寸、过滤体积和后续观察方式确认孔径、直径、颜色和是否需要灭菌。
第二步:安装滤膜用洁净镊子夹取滤膜,平整放入过滤器或滤膜夹具,避免折叠、划伤和边缘翘起。
第三步:预润湿对水相样品可用纯水、缓冲液或目标溶剂预润湿膜面,降低初始阻力并减少气泡。
第四步:过滤样品采用真空过滤、正压过滤或适配装置过滤;建议逐步增加压力,避免瞬间高压导致膜变形或样品冲散。
第五步:冲洗残留根据实验目的,用少量纯水或缓冲液冲洗杯壁和膜面边缘,保证颗粒尽量集中在有效过滤区域。
第六步:干燥或染色若需显微观察,可按方法学要求自然干燥、烘干、染色或直接湿膜观察;Isopore™ 非吸湿特性有利于快速干燥。
第七步:显微分析将滤膜转移至载玻片、样品台或电子显微镜样品托上,进行计数、拍照、形貌观察或后续光谱分析。

3)操作注意事项

注意事项说明
避免机械损伤PC 膜较薄,夹取时不要用镊子尖端刮擦有效过滤区域。
避免过载堵膜高颗粒浓度样品建议先稀释或预过滤,否则容易降低流速并影响颗粒分布均匀性。
控制过滤压力高压可能导致流速变化、膜面变形或颗粒穿透风险增加。
灭菌后确认流速官方说明 Isopore™ 可高压蒸汽灭菌、EtO 或伽马辐照,但高压灭菌后流速可能降低。
溶剂兼容性需确认通用资料显示 Isopore™ 与水相和有机溶剂均有兼容性,但实际使用仍应结合具体溶剂、温度、接触时间和货号 SDS/COA 确认。

六、与常见滤膜材料对比

对比项目Isopore™ PC 亲水滤膜MCE 混合纤维素酯滤膜PVDF 亲水滤膜PTFE 亲水滤膜
结构特点径迹蚀刻筛选型,孔径较规则多孔网络结构,常用于微生物检测低蛋白吸附,常用于生物样品澄清化学兼容性强,适合复杂溶剂体系
颗粒观察优秀,颗粒保留在表面一般,背景和膜结构可能干扰观察一般,更多用于澄清过滤视具体型号而定
显微镜分析非常适合可用但背景相对更复杂不是首选视应用而定
流速/通量中等,受孔隙率影响通常较高较高差异较大
典型用途颗粒计数、空气监测、荧光显微镜、趋化性、微塑料微生物检测、水样过滤、一般颗粒截留蛋白样品、培养基、生物液体澄清有机溶剂、酸碱溶液、化学过滤
选型建议需要“表面观察”和“颗粒计数”时优先需要常规微生物过滤时常用处理蛋白或生物样品时考虑强溶剂或强腐蚀体系优先评估

七、常见问题 FAQ

Q1:Isopore™ PC 亲水滤膜最适合什么实验?
适合过滤后需要直接观察膜表面的实验,例如空气颗粒物分析、颗粒计数、微塑料分析、荧光显微镜、趋化性实验、细胞迁移分析和部分微生物检测。官方资料也将 Air Monitoring、Epifluorescent Microscopy、Chemotaxis Assays 列为其典型应用。

Q2:Isopore™ 和普通 MCE 滤膜最大的区别是什么?
Isopore™ 是聚碳酸酯径迹蚀刻筛选型滤膜,孔径分布更窄,颗粒主要保留在膜表面;MCE 通常是多孔网络结构,更偏向常规过滤与微生物截留。需要做显微镜计数、颗粒形貌观察、低背景分析时,Isopore™ 更有优势。

Q3:Isopore™ 滤膜可以高压灭菌吗?
可以。Sigma-Aldrich 产品问答中说明,Isopore™ 膜可通过 121 °C、1 bar 高压蒸汽灭菌,也可使用 EtO 或伽马辐照灭菌;但高压灭菌可能导致流速下降。

Q4:Isopore™ 滤膜是无菌的吗?
多数 Isopore™ 滤膜片为非无菌包装,是否无菌需看具体货号。Microfil® with Isopore 的 0.4 μm 页面显示其 sterility 为 non-sterile;如实验要求无菌,应选择无菌包装规格或按方法学要求自行灭菌。

Q5:白色和棕色 Isopore™ 怎么选?
白色滤膜适合多数常规颗粒观察、透射光显微镜和一般实验;棕色滤膜适合需要更强背景对比或特定显微观察条件的场景。官方资料指出 Isopore™ 半透明材料通常不需要透明处理,也有棕色品种可选。

Q6:Isopore™ 滤膜需要做称重匹配吗?
通常不需要。官方资料说明,由于焦油和灰分重量较低且相对恒定,通常不需要匹配重量滤膜。

Q7:能不能用于有机溶剂?
通用资料显示 Isopore™ 兼容水相和有机溶剂,但聚碳酸酯对不同有机溶剂的耐受性会有差异。涉及强溶剂、长时间浸泡、高温或定量分析时,建议先核对 SDS、化学兼容性表和具体货号说明。

Q8:为什么过滤后颗粒分布不均匀?
常见原因包括过滤压力过大、样品浓度过高、滤膜未平整安装、过滤杯壁残留未冲洗、样品中有气泡或颗粒团聚。建议降低压力、稀释样品、充分混匀并用少量纯水或缓冲液冲洗过滤器内壁。

Q9:做微塑料分析选多大孔径?
根据目标微塑料粒径选择孔径。若目标颗粒较小,可选择 0.4 μm 或 0.8 μm;若样品颗粒浓度高或目标颗粒较大,可选择 1.2、2.0、3.0 或 5.0 μm,以减少堵膜并提升过滤效率。0.4 μm Isopore™ 产品资料中明确列出了 microplastics analysis 相关应用。

Q10:如何获取 COA 或 COQ?
Sigma-Aldrich 产品页面提供 Certificate of Analysis 和 Certificate of Quality 查询入口,可通过产品批号或 Batch/Lot 信息检索相关文件


📞 联系方式

  • 🛒 手机淘宝店铺:科学材料站

  • 🔗 淘宝链接:点击进入淘宝网页

  • ☎ 电话:+86 130-0303-8751 / +86 156-0553-2352

  • 💬 微信:SCI-Materials-Hub

  • 📧 Email 报价/对公需求:contact@scimaterials.cn


美国 Millipore 聚碳酸酯 PC 亲水滤膜价格表

规格型号:孔径 0.1μm–10μm


一、孔径 0.1μm–0.8μm

型号 / 孔径Φ13mm,100片/盒Φ25mm,100片/盒Φ37mm,100片/盒Φ47mm,100片/盒Φ90mm,30片/盒Φ142mm,50片/盒
VCTP / 0.1μmVCTP01300
¥1626
VCTP02500
¥1760
VCTP04700
¥3401
VCTP14250
¥8383
GTTP / 0.2μmGTTP01300
¥1002
GTTP02500
¥1194
GTTP04700
¥1819
GTTP09030
¥1730
GTTP14250
¥4848
GTBP / 0.22μmGTBP01300
¥1382
GTBP02500
¥3072
GTBP04700
¥6831
HTTP / 0.4μmHTTP01300
¥1002
HTTP02500
¥1194
HTTP03700
¥1610
HTTP04700
¥2178
HTTP09030
¥1835
HTTP14250
¥5295
DTTP / 0.6μmDTTP01300
¥1156
DTTP02500
¥1231
DTTP04700
¥1910
ATTP / 0.8μmATTP01300
¥1156
ATTP02500
¥1231
ATTP03700
¥1626
ATTP04700
¥1910
ATTP14250
¥5280

二、孔径 1.2μm–10μm

型号 / 孔径Φ13mm,100片/盒Φ25mm,100片/盒Φ37mm,100片/盒Φ47mm,100片/盒Φ90mm,30片/盒Φ142mm,50片/盒
RTTP / 1.2μmRTTP01300
¥1156
RTTP02500
¥1231
RTTP04700
¥1910
RTTP14250
¥6548
TTTP / 2μmTTTP02500
¥1231
TTTP04700
¥1910
TSTP / 3μmTSTP01300
¥1156
TSTP02500
¥1231
TSTP04700
¥1910
TSTP14250
¥5672
TMTP / 5μmTMTP01300
¥1156
TMTP02500
¥1231
TMTP04700
¥1910
TMTP09030
¥2506
TMTP14250
¥5286
TETP / 8μmTETP01300
¥1328
TETP02500
¥1174
TETP04700
¥2372
TCTP / 10μmTCTP01300
¥1156
TCTP02500
¥1231
TCTP04700
¥1910
TCTP14250
¥5668

部分使用和引用我们材料的参考文献 (摘自于Google Scholar)


二氧化碳还原

1. ACS Nano Strain Relaxation in Metal Alloy Catalysts Steers the Product Selectivity of Electrocatalytic CO2 Reduction

The bipolar membrane (Fumasep FBM) in this paper was purchased from SCI Materials Hub, which was used in rechargeable Zn-CO2 battery tests. The authors reported a strain relaxation strategy to determine lattice strains in bimetal MNi alloys (M = Pd, Ag, and Au) and realized an outstanding CO2-to-CO Faradaic efficiency of 96.6% with outstanding activity and durability toward a Zn-CO2 battery.


2. Front. Chem. Boosting Electrochemical Carbon Dioxide Reduction on Atomically Dispersed Nickel Catalyst

In this paper, Vulcan XC-72R was purchased from SCI Materials Hub. Vulcan XC 72R carbon is the most common catalyst support used in the anode and cathode electrodes of Polymer Electrolyte Membrane Fuel Cells (PEMFC), Direct Methanol Fuel Cells (DMFC), Alkaline Fuel Cells (AFC), Microbial Fuel Cells (MFC), Phosphoric Acid Fuel Cells (PAFC), and many more!


3. Adv. Mater. Partially Nitrided Ni Nanoclusters Achieve Energy-Efficient Electrocatalytic CO2 Reduction to CO at Ultralow Overpotential

An AEM membrane (Sustainion X37-50 Grade RT), purchased from SCI Materials Hub) was activated in 1 M KOH for 24 h, washed with ultra-purity water prior to use.


4. Adv. Funct. Mater. Nanoconfined Molecular Catalysts in Integrated Gas Diffusion Electrodes for High-Current-Density CO2 Electroreduction

In this paper (Supporting Information), an anion exchanged membrane (Fumasep FAB-PK-130 obtained from SCI Materials Hub (www.scimaterials.cn)) was used to separate the catholyte and anolyte chambers.

SCI Materials Hub: we also recommend our Fumasep FAB-PK-75 for the use in a flow cell.


5. Appl. Catal. B Efficient utilization of nickel single atoms for CO2 electroreduction by constructing 3D interconnected nitrogen-doped carbon tube network

In this paper, the Nafion 117 membrane was obtained from SCI Materials Hub.


6. Vacuum Modulable Cu(0)/Cu(I)/Cu(II) sites of Cu/C catalysts derived from MOF for highly selective CO2 electroreduction to hydrocarbons

In this paper, Proton exchange membrane (Nafion 117), Nafion D520, and Toray 060 carbon paper were purchased from SCI Materials Hub.


7. National Science Review Confinement of ionomer for electrocatalytic CO2 reduction reaction via efficient mass transfer pathways

An anion exchange membrane (PiperION-A15-HCO3) was obtained from SCI Materials Hub.


8. Catalysis Communications Facilitating CO2 electroreduction to C2H4 through facile regulating {100} & {111} grain boundary of Cu2O

Carbon paper (TGPH060), membrane solution (Nafion D520), and ionic membrane (Nafion N117) were obtained from Wuhu Eryi Material Technology Co., Ltd.

Note: Wuhu Eryi Material Technology Co. is a company hold by SCI Materials Hub.


9. Advanced Energy Materials Interatomic Electronegativity Offset Dictates Selectivity When Catalyzing the CO2 Reduction Reaction

The bipolar membrane (Fumasep FBM), carbon paper (SIGRACET 29BC, Freudenberg paper H23C2), ion exchange membrane (Nafion N117), and anion exchange membrane (Fumasep, FAA-3-PK-130) were all obtained from SCI Materials Hub.


10. Separation and Purification Technology *CO spillover induced by bimetallic xZnO@yCuO active centers for enhancing C–C coupling over electrochemical CO2 reduction

5 % Nafion solution was obtained through SCI Materials Hub.


11. National Science Review Confinement of ionomer for electrocatalytic CO2 reduction reaction via efficient mass transfer pathways

In this paper, PiperION-A5-HCO3 anion exchange resin, Fumion FAA anion exchange resin, PiperION-A15-HCO3 and FAA-3-50 were purchased from SCI Materials Hub.


12. Vacuum Controllable dual Cu–Cu2O sites derived from CuxAl-LDH for CO2 electroreduction to hydrocarbons

Nafion and carbon paper (TGPH060) were supplied through SCI Materials Hub.


13. Chemical Engineering Journal Coupling electrocatalytic CO2 reduction with glucose oxidation for concurrent production of formate with high efficiency

An AEM membrane (PiperION, purchased from SCI Materials Hub) was activated in 1 M KOH for 24 h, washed with ultra-purity water prior to use.


14. Chem Identification of Cu0/Cu+/Cu0 interface as superior active sites for CO2 electroreduction to C2+ in neutral condition

In this paper, Sustainion X37-50 Grade RT membrane and the MEA electrolyzer (CRRMEA1a, Figure S34) with 1cm2 active area were obtained from SCI Materials Hub.

微信公众号中文报道:Chem:基于热力学驱动的混合策略形成Cu0/Cu+/Cu0界面用于中性条件CO2电还原C2+


15. Surfaces and Interfaces Modulating surface microenvironment based on Ag-adorned CuO flower-liked nanospheres for strengthening C-‍C coupling during CO2RR

5 wt.% of Nafion solution, and N115 proton exchange membrane were procured with the help of SCI Materials Hub


16. ACS Appl. Energy Mater. Nanoporous Bismuth Induced by Surfactant-Modified Dealloying for Efficient Electrocatalytic Reduction of CO2 to Formic Acid

The anion exchange membrane (AEM, PiperION A20) and cation exchange membrane (CEM, Nafion 117) were obtained from SCI Materials Hub.


17. Adv. Energy Mater. Tailoring Microenvironments and In Situ Transformations of Cu Catalysts for Selective and Stable Electrosynthesis of Multicarbon Products

For GDE-based CO₂ electrolysis, the MEA reactor (CRRMEA5a, Sci-Materials Hub) consists of a titanium anode plate and a cathode plate with flow fields, along with insulating gaskets, integrated into a compression cell. The geometric area of each flow field is 5 cm² An anion exchange membrane (PiperION, A40-HCO3, Versogen) was used to separate the anode and the cathode.


18. Journal of Environmental Chemical Engineering Evaluation of electromethanogenesis in a microbial electrolysis cell using nylon cloth as a separator: reactor performance and metagenomic analysis

A commercial Nafion PEM (SCI Materials Hub) was used as the control to compare the electromethanogenesis performance.


19. Angew pH-Universal Electrocatalytic CO2 Reduction with Ampere-level Current Density on Doping-engineered Bismuth Sulfide

CRRMEA1a 1cm2 MEA electrolyzer (Figure 4d) was obtained from SCI Materials Hub.

微信公众号中文报道:安徽师范大学最新Angew!全pH范围内铋基催化剂用于安培级电流密度电催化CO2还原


20. Separation and Purification Technology Coupling regulation of boron doping and morphology in nano-floral CuO using one pot method for electrocatalytic CO2 reduction

Carbon paper (TGPH060), Dupont Nafion solution (D520), and proton exchange membrane (N117) were acquired by SCI Materials Hub.


21. Chemical Engineering Journal Manipulating dual effects of morphology and oxygen vacancies through the incorporation of CuO onto CeO2 nanospheres for electrochemical CO2 reduction

Carbon paper (TGPH060), Dupont Nafion solution (D520), and proton exchange membrane (N117) were acquired by SCI Materials Station Hub (SCI Materials Hub, the same author as Ref. 20).


22. Advanced Materials Universal Formation of Single Atoms from Molten Salt for Facilitating Selective CO2 Reduction

The Nafion D520 dispersion and gas diffusion electrode (GDE, Sigracet, 39BB) were obtained from SCI Materials Hub (www.scimaterials.cn).


23. Science Bulletin Compressive strain in Cu catalysts: Enhancing generation of C2+ products in electrochemical CO2 reduction

CRRMEA1a 1cm2 MEA electrolyzer (Figure 3a) was obtained from SCI Materials Hub.

微信公众号中文报道:Science Bulletin:优化水覆盖度促进安培级电流密度下CO2还原C2+


24. Processes Investigation of a Hydrophobic Sputtered Cu Electrode to Electrocatalyze CO2 Towards a C2+ Product: The Effect of Substrate and Catalyst Thickness

Carbon paper (SGL CARBON, SGL36BB, purchased from SCI Materials Hub)


25. Chemical Engineering Journal In-situ reconstruction of active bismuth for enhanced CO2 electroreduction to formate

Anion-exchange membrane (Fumasep FAA-3–50) was purchased from SCI Materials Hub.


26. Nature Communications Bromide-mediated membraneless electrosynthesis of ethylene carbonate from CO2 and ethylene

Nafion D520 polymer binder solution (5 wt%) was purchased from SCI Materials Hub.


27. Ionics Sulfur-modified promoting the electrochemical CO2 reduction into formate performance of BiOI

Carbon black (Vulcan XC- 72, Cabot), teflon-treated carbon paper (TGP-H- 060, Toray), and proton exchange membrane (Nafion- 117) were purchased from SCI Materials Hub.


28. Nature Communications Continuous decoupled redox electrochemical CO2 capture

The anion exchange membrane (FAA-3-PK-75) with a thickness of 75 ± 5 μm was purchased from SCI Materials Hub.


29. Journal of Energy Chemistry Construction of efficient electrodes for CO2RR through microenvironment regulation of hydrophobic ionomer

An anion exchange membrane (PiperION-A15-HCO3, SCI Materials Hub) was used to separate the anode and cathode chambers.


30. Journal of Energy Chemistry The insights into ionomer-catalyst interactions enabling high-efficiency CO2 electroreduction in pure water

Methylimidazolium ionomer powder (Sustainion XA-9, dispersed in ethanol at 5 wt%), and piperidinium ionomer solution (PiperION A5, dispersed in ethanol at 5 wt%) were purchased from SCI Materials Hub (

www.scimaterials.cn)


31. ChemElectroChem Scaling CO Electrolyzers for Carbon-Neutral Chemical Synthesis

Specifically, the PTFE-CB ink was prepared by mixing 0.1 g of CB (Vulcan XC-72R, SCI Materials Hub) with PTFE (25 % of the CB mass) in 50 mL of methanol. After ultrasonication for 2 hours, the ink was air-sprayed onto the gas diffusion layer (GDL) (Sigracet 28 BC, SCI Materials Hub) at 60 °C. The anion exchange membrane (AEM) was Fumasep FAA-3-50 (SCI Materials Hub)


32. American Institute of Chemical Engineers Porous carbon-supported Ag catalysts enablehigh-current-density CO2 electroreductionto CO with enhanced mass transport

Carbon paper (SGL Sigracet 39 BB SGL Carbon), anion exchange membrane (Sustainion X37-50 Grade T, Dioxide Materials), Ni foam was obtained from SCI Materials Hub.


33. Applied Catalysis B: Environment and Energy Microenvironmental hydrophobicity-regulated evolution of reaction sites for boosting electrochemical CO2 reduction

A gas diffusion layer AvCarb GDS2240 was obtained from SCI MATERIALS HUB.


34. Applied Catalysis B: Environment and Energy Boosting seawater desalination driven by electroreduction of CO2 to formate on bimetallic Sn/Cu polyphthalocyanine frameworks

Gas diffusion layers (GDLs) consisting of Sigracet 36BB substrates (SCI Materials Hub) were utilized.


35. Catalysis Today Efficient and cost-effective electrocatalysts for coproduction of formate through electrocatalytic oxidation of PET-derived ethylene glycol coupled with CO2 reduction

Cation exchange membrane ((Nafion 117, DuPont) was purchased from SCI Materials Hub, China.


电池

1. J. Mater. Chem. A Blocking polysulfides with a Janus Fe3C/N-CNF@RGO electrode via physiochemical confinement and catalytic conversion for high-performance lithium–sulfur batteries

Graphene oxide (GO) in this paper was obtained from SCI Materials Hub. The authors introduced a Janus Fe3C/N-CNF@RGO electrode consisting of 1D Fe3C decorated N-doped carbon nanofibers (Fe3C/N-CNFs) side and 2D reduced graphene oxide (RGO) side as the free-standing carrier of Li2S6 catholyte to improve the overall electrochemical performance of Li-S batteries.


2. Joule A high-voltage and stable zinc-air battery enabled by dual-hydrophobic-induced proton shuttle shielding

This paper used more than 10 kinds of materials from SCI Materials Hub and the authors gave detailed properity comparsion.

The commercial IEMs of Fumasep FAB-PK-130 and Nafion N117 were obtained from SCI Materials Hub.

Gas diffusion layers of GDL340 (CeTech) and SGL39BC (Sigracet) and Nafion dispersion (Nafion D520) were obtained from SCI Materials Hub.

Zn foil (100 mm thickness) and Zn powder were obtained from the SCI Materials Hub.

Commercial 20% Pt/C, 40% Pt/C and IrO2 catalysts were also obtained from SCI Materials Hub.


3. Journal of Energy Chemistry Vanadium oxide nanospheres encapsulated in N-doped carbon nanofibers with morphology and defect dual-engineering toward advanced aqueous zinc-ion batteries

In this paper, carbon cloth (W0S1011) was obtained from SCI Materials Hub. The flexible carbon cloth matrix guaranteed the stabilization of the electrode and improved the conductivity of the cathode.


4. Energy Storage Materials Defect-abundant commercializable 3D carbon papers for fabricating composite Li anode with high loading and long life

The 3D carbon paper (TGPH060 raw paper) were purchased from SCI Materials Hub.


5. Nanomaterials A Stable Rechargeable Aqueous Zn–Air Battery Enabled by Heterogeneous MoS2 Cathode Catalysts

Nafion D520 (5 wt%), and carbon paper (GDL340) were received from SCI-Materials-Hub.


6. SSRN An Axially Directed Cobalt-Phthalocyanine Covalent Organic Polymer as High-Efficient Bifunctional Catalyst for Zn-Air Battery

Carbon cloth (W0S1011) and other electrochemical consumables required for air cathode were provided by SCI Materials Hub.


7. SSRN Cr-induced improvement of structural stability of δ-MnO2 optimizes cycling stability of aqueous Zn-ion batteries

The Zn sheet (99.99%) was purchased from SCI Materials Hub.


8. Nature Communications Atomic-scale regulation of anionic and cationic migration in alkali metal batteries

The lithium metal disk (purity: 99.9%, diameter: 16 mm, thickness: 0.6 mm) was obtained from SCI Materials Hub.


9. Chemical Engineering Journal Zinc-based energy storage with functionalized carbon nanotube/polyaniline nanocomposite cathodes

CNTs were purchased from SCI Materials Hub.


10. ACS Nano Interfacial Chemistry Modulation via Amphoteric Glycine for a Highly Reversible Zinc Anode

Zn foil (>99.99%, 100 μm) was purchased from SCI Materials Hub.


11. ACS Nano High-Energy and Long-Lived Zn–MnO2 Battery Enabled by a Hydrophobic-Ion-Conducting Membrane

Zn foil (99.9%), carbon paper, and carbon felt were obtained from SCI Materials Hub.


12. Nature Communications Unravelling rechargeable zinc-copper batteries by a chloride shuttle in a biphasic electrolyte

Carbon cloth (CeTech W0S1011), PP membrane (Celgard 2300), Glass fiber (Whatman GF/A), anion exchange membrane (Fumasep FAB-PK-130), and cation exchange membrane (Nafion N-117) were purchased from sci materials hub.


13. PROCEEDINGS OF SPIE A dendrite-free and corrosion-suppressive metallic Zn anode regulated by the hybrid aqueous/organic electrolyte

Zn foil (99.9%, 100 μm thickness) was obtained from the SCI Materials Hub.


14. Journal of Alloys and Compounds Cr-induced enhancement of structural stability in δ-MnO2 for aqueous Zn-ion batteries

The Zn sheet (99.99%) and Whatman GF/D paper were available for purchase on on the SCI Materials Hub.


15. Small Multifunctional Umbrella: In Situ Interface Film Forming on the High-Voltage LiCoO2 Cathode by a Tiny Amount of Nanoporous Polymer Additives for High-Energy-Density Li-Ion Batteries

Carbon coating aluminum foils with a thickness of 16 µm were acquired from SCI Materials Hub.


16. Journal of Industrial and Engineering Chemistry Investigation into electrochemical catalytic properties and electronic structure of Mn doped SrCoO3 perovskite catalysts

KB-EC600JD superconducting carbon black was obtained from SCI Materials Hub.


17. Journal of Alloys and Compounds Inhibiting polysulfide shuttle and enhancing polysulfide redox: Conductive 2D metal-organic framework coated separators for lithium-sulfur batteries

Ketjen black was obtained from SCI Materials Hub


18. Chemical Engineering Journal Regulating N-doped biochar with Fe-Mo heterojunctions as cathode in long-life zinc-air battery

Conductive carbon black (Vulcan XC-72R) was purchased from SCI Materials Hub (Wuhu, Anhui).


19. Nature Portfolio Fast-kinetics and high-compatibility aqueous cadmium-metal battery for next-generation energy storage infrastructures (Under review.)

Cd foil (99.9%), Zn foil (99.9%) and polytetrafluoroethylene (PTFE) aqueous dispersion solution were obtained from the supplier of SCI Materials Hub.

All cells were assembled using two-electrode Swagelok-type configurations, supported by SCI Materials Hub.


20. Polymer A biodegradable gel polymer membrane derived from poly-gamma-glutamic acid for high-rate and long-lifespan sodium metal batteries

Celgard 2400 separator (polypropylene (PP), 25 μm) was sourced from SCI Materials Hub.


21. ACS Applied Energy Materials 3D Graphene Nanoflake/Vertically Aligned Carbon Nanotube/CoAl Layered Double Oxide Composites for High-Performance Lithium-Ion Batteries

Carbon-coated aluminum foil was procured from SCI Materials Hub.


22. Chemistry A European Jouranl Regulating the Interfacial Charge Density by Constructing a Novel Zn Anode-Electrolyte Interface for Highly Reversible Zn Anode

Ketjenblack (KB) was purchased from SCI Materials Hub


23. Advanced Functional Materials A Biphasic Membraneless Zinc-Iodine Battery with High Volumetric Capacity

Graphite felt (GF, G650A) was purchased from SCI Materials Hub.


24. Science Advances Alcohol molecule coupling: A universal approach to modulating amorphousness in vanadium-based cathodes for high-rate and durable aqueous zinc-ion batteries

Fueiceel® BM03 Battery test hardware in Figure 6F was obtained from SCI Materials Hub. The Fueiceel® BM03 scale-up battery powering an LED panel.


25. Nature Communications Cooperative Jahn-Teller effect and engineered long-range strain in manganese oxide/graphene superlattice for aqueous zinc-ion batteries

The Zn||MnO2 coin cells were assembled by Zn foil (thickness of 0.1 mm, 99.99%, SCI Materials Hub) counter electrodes


26. Adv. Funct. Mater. Construction of Ionic Conductive Electrode/ Electrolyte Interphases via Li+ Coordination Regulator for 4.7 V Li/ LiNi0.9Co0.05Mn0.05O2 Batteries

The CR2032 coin cells were assembled with a Celgard 2400 separator (SCI Materials Hub.) in a glove box.


27. Journal of Energy Storage Bacterial cellulose mixed with glass fiber as a separator to achieve long cycle life of aqueous zinc-ion batteries

304 stainless steel foil (99.99 % purity, purchased from SCI Materials Hub)


28. Nature Communications Dual-structure-breaking electrolyte enables practical cadmium-metal battery

Two-electrode (Swagelok2E002) and three-electrode (Swagelok3E2e) Swagelok-type configurations were supported by SCI Materials Hub (Supplementary Figs. 102, 103)

The stacked configuration (BM03) for the scaled-up cell was supported by SCI Materials Hub.

Cd foil (99.9%), Zn foil (99.9%), and polytetrafluoroethylene (PTFE) aqueous dispersion solution (D-210C, solid content: 60 w%, size: ~0.25 μm size) were obtained from the supplier of SCI Materials Hub.


29. Nature Nanotechnology A nanoengineered lithium-hosting carbon/zinc oxide composite electrode material for efficient non-aqueous lithium metal batteries

The operando battery pressure sensing equipment (BS01) was purchased from SCI Materials Hub (www.scimaterials.cn).


30. Small Enabling a Robust Long-Life Zinc-Iodine Flow Battery by Stabilizing the Zinc Anode in a Halide-Rich Electrolyte

Nafion 115 membrane (N115) was purchased from SCI Materials Hub.


电解水

1. International Journal of Hydrogen Energy Gold as an efficient hydrogen isotope separation catalyst in proton exchange membrane water electrolysis

The cathodic catalysts of Pt/C (20 wt%, 2–3 nm) and Au/C (20 wt%, 4–5 nm) were purchased from SCI Materials Hub.


2. Small Science Silver Compositing Boosts Water Electrolysis Activity and Durability of RuO2 in a Proton-Exchange-Membrane Water Electrolyzer

Two fiber felts (0.35 mm thickness, SCI Materials Hub) were used as the porous transport layers at both the cathode and the anode.


3. Advanced Functional Materials Hierarchical Crystalline/Amorphous Heterostructure MoNi/NiMoOx for Electrochemical Hydrogen Evolution with Industry-Level Activity and Stability

Anion-exchange membrane (FAA-3-PK-130) was obtained from SCI Materials Hub.


4. Chemical Engineering Journal Electronic configuration of single ruthenium atom immobilized in urchin-like tungsten trioxide towards hydrazine oxidation-assisted hydrogen evolution under wide pH media

The non-reinforced anion exchange membrane (AEM) of the coupled system was obtained from SCI Materials Hub (Fumasep FAA-3-50).


5. Cell Reports Physical Science Non-layered dysprosium oxysulfide as an electron-withdrawing chainmail for promoting electrocatalytic oxygen evolution

Nickel foam (NF) was offered by SCI Materials Hub (Wuhu, China), and was ultrasonicated in HCl solution, ethanol, and acetone in proper order before being used in electrochemical measurements.


6. Materials Today Catalysis Valence engineering via double exchange interaction in spinel oxides for enhanced oxygen evolution catalysis

Commercial Cu foam was purchased from SCI Materials Hub.


7. Advanced Functional Materials Elucidating the Critical Role of Ruthenium Single Atom Sites in Water Dissociation and Dehydrogenation Behaviors for Robust Hydrazine Oxidation-Boosted Alkaline Hydrogen Evolution

The nonreinforced anion exchange membrane (AEM) of the HzOR-assisted OWS system was purchased from SCI Materials Hub (Fumasep FAA-3-50).


8. ACS Omega Boosting Hydrogen Evolution through the Interface Effects of Amorphous NiMoO4–MoO2 and Crystalline Cu

Pt/C (20 wt %) was purchased from SCI Materials Hub.


9. Journal of Colloid and Interface Science The Dual Active Sites Reconstruction on Gelatin In-Situ Derived 3d Porous N-Doped Carbon for Efficient and Stable Water Splitting

Nafion D521 was purchased from SCI Materials Hub.


10. Molecules Interfacial Interaction in NiFe LDH/NiS2/VS2 for Enhanced Electrocatalytic Water Splitting

Carbon cloth (SCI Materials Hub) were employed as substrates for the in-situ formation of VS2 and NiS2/VS2 on its surface via hydrothermal synthesis.


11. Chemical Engineering Journal Mapping hydrogen evolution activity trends of V-based A15 superconducting alloys

Carbon fiber paper (GDS250) was obtained from the SCI materials Hub.


12. Advanced Science A Dual-Cation Exchange Membrane Electrolyzer for Continuous H2 Production from Seawater

The CEMs include GORE-SELECT Gore M788.12 (W. L. Gore & Associates, America) and FUMA Fumasep FKB-PK-130 (FuMa Tech., Co., Ltd., Germany) were provided by SCI Materials Hub.


13. Ind. Eng. Chem. Res. Electrolysis of Tertiary Water Effluents - a Pathway to Green Hydrogen

The PEM electrolyzer stack PSC2000 was purchased from the SCI Materials Hub with a maximum hydrogen production capability of 2000 mL/min. The stack had 8 electrolysis cells with a maximum recommended operation current of 36 A and a voltage of 24 V. Its membrane electrode assembly had an effective area of 56 cm2 per layer and a catalyst loading of 4.0 mg/cm2 on Nafion 117 for Ir black as anode and Pt/C as cathode, respectively. The catalysts were deposited on the Nafion membrane to form a catalyst-coated membrane. Titanium bipolar plates were used to construct the electrolyzer. Water is supplied to the anode side of the electrolyzer stack during operation.


14. Adv. Energy Mater. High-Efficiency Iridium-Yttrium Alloy Catalyst for Acidic Water Electrolysis

Carbon paper (Toray TGP-H-060) was purchased from the SCI Materials Hub.


15. Journal of Alloys and Compounds Amorphous/Crystalline Nife Ldh Hierarchical Nanostructure for Large-Current-Density Electrocatalytic Water Oxidation

The commercial NiFe foam (NFF) was offered by SCI Materials Hub.


16. Nanoscale Modulating the electronic structure of VS2 via Ru decoration for efficient pH-universal electrocatalytic hydrogen evolution reaction

W0S1009 Carbon cloth (CC, SCI Materials Hub) were employed as substrate for the in-situ formation of Ru-VS2 and VS2 on its surface via hydrothermal synthesis.


17. Journal of Colloid and Interface Science The dual active sites reconstruction on gelatin in-situ derived 3D porous N-doped carbon for efficient and stable overall water splitting

Nafion D521 was purchased from SCI Materials Hub.


18. Journal of Physics and Chemistry of Solids AgCo bimetallic cocatalyst modified g-C3N4 for improving photocatalytic hydrogen evolution

Nafion D520 dispersion (5 wt%) was purchased from SCI Materials Hub.


19. Separation and Purification Technology NiP2 as an efficient non-noble metal cathode catalyst for enhanced hydrogen isotope separation in proton exchange membrane water electrolysis

Ni supported on Vulcan XC-72, obtained from SCI materials Hub.


20. ACS Appl. Nano Mater. Rapid Electrical-Field-Enhanced Corrosion Endows Ni3Fe/NiFe Layered Double Hydroxide Nanosheets with High-Rate Oxygen Evolution Activity

The Ni3Fe substrate obtained directly from a commercial NiFe foam (nominal Ni 70% at. % + Fe 30 at. %, thickness: 2 mm, porosity: 100 PPI, SCI Materials Hub) was cleaned with acetone, ultrapure water, and ethanol successively and was dried with compressed air.


21. eScience Porous PVA skin-covered thin Zirfon-type separator as a new approach boosting high-rate alkaline water electrolysis beyond 1000 hours’ lifespan

The proposed thin V-Zirfon separator samples were evaluated at first by water electrolysis at 60 °C using a two-compartment zero-gap electrolyzer (LSCF Alkaline Water Electrolyzer stack [1 cell], purchased from SCI Materials Hub).


22. ACS Materials Lett. Promoting Nonacid Hydrogen Evolution over Ni4Mo/Cu by D-Band Regulation

Commercial Pt/C (20%) from Wuhu Eryi Material Technology Co., Ltd.

Note: Wuhu Eryi Material Technology Co. is a company hold by SCI Materials Hub.


23. Molecules Interfacial Interaction in NiFe LDH/NiS2/VS2 for Enhanced Electrocatalytic Water Splitting

Carbon cloth (CC, SCI Materials Hub) were employed as substrates for the in-situ formation of VS2 and NiS2/VS2 on its surface via hydrothermal synthesis.


24. Nat. Commun. Flexible tungsten disulfide superstructure engineering for efficient alkaline hydrogen evolution in anion exchange membrane water electrolysers

Commercial IrO2, Pt/C (40 wt%), anion exchange membrane (Sustainion X37-50 Grade 60) and carbon fiber cloth (CFC) were obtained from SCI Materials Hub.


25. International Journal of Hydrogen Energy Enhancing performance of anion exchange membrane electrolyzer through modification of carbon paper liquid-gas diffusion layer

The anode is made of Ni–Fe foam (60% Fe + 40% Ni, SCI Materials Hub, China), while the cathode is made of carbon paper electrode. AEM employed is the highly stable PiperION™-A40-HCO3 (with a thickness of 40 μm).


26. Nature Communications Rationally designed Ru catalysts supported on TiN for highly efficient and stable hydrogen evolution in alkaline conditions

Fumasep FAAM-20 anion exchange membrane was purchased from SCI Materials Hub.


27. Nature Communications Redox-mediated decoupled seawater direct splitting for H2 production

Nickel foam (Ni Foam, aperture: 110 ppi, area density: 380 ± 20 g cm−2), platinum carbon (Pt/C, 20 wt%), anion exchange membranes (FAA-3-PK-75), graphite felt (thickness: ~2 mm), and commercial alkaline water electrolyzers were purchased from SCI Materials Hub.


28. ACS Applied Materials & Interface Promoting Reaction Kinetics of the Air Cathode for Neutral Zinc–Air Batteries by the Photothermal Effect

Carbon paper (SGL Carbon Sigracet 22BB) was purchased from SCI Materials Hub.


29. International Journal of Hydrogen Energy Efficient and stable formaldehyde-polyoxometalate battery for dual-decoupled hydrogen production

Firstly, the surface of the Cu foam (1 × 1 cm2, Sci Materials Hub Co.) was oxidized into Cu(OH)2 nanowires (denoted as sample Cu(OH)2 NWs/Cu foam) by (NH4)2S2O8 (0.13 M) in 2.67 M NaOH aqueous solution for 30 min at room temperature.


30. International Journal of Hydrogen Energy Controlled deposition of trimetallic Fe–Ni–V oxides on nickel foam as high-performance electrocatalysts for oxygen evolution reaction

Nickel foam (95–98% porosity, 40 pores/cm), manufactured by SCI Materials Hub, was employed for catalyst fabrication.


31. Journal of Alloys and Compounds Cobalt-doping mediated low-valence Rh centers in rhodium sulfide superconductor for improved electrocatalytic hydrogen evolution

Carbon fiber paper (Spectracarb 2050 A, thickness of 10μm, density of 0.50 g cm−3) was purchased from SCI Materials Hub.


32. J. Mater. Chem. A Promoted surface reconstruction of amorphous nickel boride electrocatalysts by boron dissolution for boosting oxygen evolution reaction

The ink was also sprayed onto a 1.5 mm-thick Ni foam substrate (SCI Materials Hub, China).


33. Advanced Energy Materials Surface Reconstruction Activates Non-Noble Metal Cathode for Proton Exchange Membrane Water Electrolyzer


34. J. Mater. Chem. A Multimetallic layered double hydroxides as efficient and durable oxygen evolution catalysts for anion exchange membrane water electrolysis at high current densities


35. Nano Research Hierarchical NiFe LDH/N-doped Co/nickel foam as highly active oxygen evolution reaction electrode for anion exchange membrane water electrolysis

Commercial PtRu/C and RuO2 were purchased from SCI Materials Hub.


36. J. Mater. Chem. A Ga doping Enhances Oxygen Evolution Reaction Performance and stability of NiFe layered double hydroxides

Nickel foam (NF) was purchased from SCI Materials Hub (99.9%,bore diameter 200-250um, thickness 0.3mm).


37. Journal of Industrial and Engineering Chemistry Optimizing CoFe2O4 coatings on nickel foam via Aerosol-Assisted CVD for superior electrochemical oxygen evolution Catalysis

To fabricate the catalyst, we used nickel foam (95–98 % porosity, with 40 pores/cm) produced by SCI Materials Hub


38. International Journal of Hydrogen Energy Experimental and simulation study of H2 crossover in PEM water electrolysis for high-pressure hydrogen production up to 20 MPa

The high-pressure PEMWE cell used a PFSA membrane (Nafion® 117, DUPONT) coated with 0.75 mg cm−2 of Pt/C (40 %, JOHNSON MATTHEY) on the cathode and 1 mg cm−2 of IrO2 (Accelerate®, SCI-MATERIALS HUB) on the anode.


39. Journal of Alloys and Compounds Ruthenium-mediated synthesis of ultrafine FePtCoNiRu high-entropy alloy nanoparticles for enhanced hydrogen evolution catalysis

Vulcan XC-72R (Ketjen Black) was purchased from SCI Materials Hub.


40. Nano-Micro Letters A Strongly Coupled Cluster Heterostructure with Pt–N-Mo Bonding for Durable and Efficient H2 Evolution in Anion-Exchange Membrane Water Electrolyzers
Carbon paper and anion-exchange membrane (PiperION A40) were obtained from SCI Materials Hub.


41. Journal of Alloys and Compounds N, P-doped coconut shell activated carbon supported Mo2C catalysts for alkaline water electrolysis hydrogen evolution

Nafion solution (D520, 5 wt%) was obtained from SCI Materials Hub.


42. Nature Communications Lanthanum-assisted lattice anchoring of iridium in Co3O4 for efficient oxygen evolution reaction in low-iridium water electrolysis

Carbon paper was obtained from SCI Materials Hub.


43. Nanoscale Two-dimensional 1T-phase MnxIr1−xO2 for high-performance acidic oxygen evolution reaction

Commercial Nafion NR212 films were purchased from SCI Materials Hub.


44. Journal of Physics: Conference Series Stability and durability of nickel-molybdenum foam electrodes in electrocatalytic seawater splitting

The Materials used in the present investigation were prepared by SCI Materials Hub.


电 催 化

1. Nature Communications Electrochemical epoxidation enhanced by C2H4 activation and hydroxyl generation at the Ag/SnO2 interface
Fumion FAA anion exchange resin and FAA-3-50 membranes with a thickness of 50 µm were purchased from SCI Materials Hub.

燃料电池

1. Polymer Sub-two-micron ultrathin proton exchange membrane with reinforced mechanical strength

Gas diffusion electrode (60% Pt/C, Carbon paper) was purchased from SCI Materials Hub.


2. Polymer Development of rigid side-chain poly(ether sulfone)s based anion exchange membrane with multiple annular quaternary ammonium ion groups for fuel cells

Fumion FAA-3-solut-10 was obtained from SCI Materials Hub.


3. Journal of Power Sources Boosting the power density of the H3PO4/polybenzimidazole high-temperature proton exchange membrane fuel cell to >1.2 W cm-2 via the deposition of acid-based polymer layers on the catalyst layers

PBI resin (molecular weight: 60000, SCI Materials Hub), carbon paper 39BB (SGL Carbon), 70 wt% Pt/C (TANAKA) were obtained from SCI Materials Hub.


4. SSRN Bulky and Rigid Spiro-Adamantane-Fluorene Unit Promoted Microphase Separation in Di-Cation Side Chain Grafted Anion Exchange Membrane

Fumasep FAA-3-20 was obtained from SCI Materials Hub.


5. ACS Sustainable Chem. Eng. Vanadium-Mediated High Areal Capacity Zinc–Manganese Redox Flow Battery

Zinc plate (thickness 1 mm), copper foam (thickness 1.5 mm), and Ketjenblack (KB) EC-600JD were procured from SCI materials hub.


6. ACS Appl. Energy Mater. Investigation of Pd2B- and NiB-Doped Pd–Ni/C Electrocatalysts with High Activity for Methanol Oxidation

Nafion solution (5 wt %, DuPont) was purchased from SCI Materials Hub.


7. Chemical Engineering Journal Loosened Hydrophobic Microphase to Facilitate Ion Channel Formation in Anion Exchange Membrane for Fuel Cell Applications

Fumasep FAA-3-20 was obtained from SCI Materials Hub.


8. Energy Conversion and Management: X Amplified impact of contact uniformity on the performance of low-catalyst-loading fuel cells

Commercial Pt/C (weight ratio of Pt, 5 %), commercial Pt/C (weight ratio of Pt, 10 %), carbon black (Ketjenblack EC-300 J), the expanded polytetrafluoroethylene (ePTFE) reinforced proton exchange membranes (PEM) (manufactured by GORE), and GDL were purchased from SCI Materials Hub.


9. ACS Sustainable Chemistry & Engineering Lignin-Derived Sustainable Cationic Polymers for Efficient High-Temperature Proton Exchange Membrane Fuel Cells

Poly-2,2′-(m-phenylene)-5,5′-bibenzimidazole (PBI, Figure 1a) [(MW)RU ∼ 308 g/mol, Mw ∼ 60,000 g/mol, Tg ∼ 427 °C] was purchased from SCI Materials Hub (China).


10. Journal of Energy StorageAnion-type solvation structure enables stable zinc‑iodine flow batteries

The Nafion 115 produced by Dupont was purchased from SCI Materials Hub and pretreated by the standard acid boiling procedure.


11. Chemical Engineering Journal A novel biofuel cell based on galactose oxidase and bilirubin oxidase for efficient glycerol conversion and electricity generation

W1S1011 carbon cloth (CC) with PTFE&MPL (CeTech) was purchased from SCI Materials Hub (China).


12. ACS Nano Improving Fuel Cell Performance of FeNx-Based Catalysts by Introducing Graphitic Microdomains in the Carbon Matrix


13. Science Advances Manipulating the coordination dice: Alkali metals directed synthesis of Co-N-C catalysts with CoN4 sites

A Nafion D521 dispersion (5 wt %, equivalent weight = 1100), PtRu-C (60% PtRu on high–surface area carbon, Pt:Ru = 1:1, SCI Materials Hub), an alkaline ionomer dispersion (PiperION-A5-HCO3-EtOH, 5 wt %, Versogen Inc.), and anion exchange membrane (PiperION-A type-HCO3, Versogen Inc.) were obtained from SCI Materials Hub.


催化-ORR

1. J. Chem. Eng. Superior Efficiency Hydrogen Peroxide Production in Acidic Media through Epoxy Group Adjacent to Co-O/C Active Centers on Carbon Black

In this paper, Vulcan XC 72 carbon black, ion membrane (Nafion N115, 127 μL), Nafion solution (Nafion D520, 5 wt%), and carbon paper (AvCarb GDS 2230 and Spectracarb 2050A-1050) were purchased from SCI Materials Hub.


2. Journal of Colloid and Interface Science Gaining insight into the impact of electronic property and interface electrostatic field on ORR kinetics in alloy engineering via theoretical prognostication and experimental validation

The 20 wt% Pt3M (M = Cr, Co, Cu, Pd, Sn, and Ir) were purchased from SCI Materials Hub. This work places emphasis on the kinetics of the ORR concerning Pt3M (M = Cr, Co, Cu, Pd, Sn, and Ir) catalysts, and integrates theoretical prognostication and experimental validation to illuminate the fundamental principles of alloy engineering.


3. Catalysis Solution-Phase Synthesis of Co-N-C Catalysts Using Alkali Metals-Induced N-C Templates with Metal Vacancy-Nx sites

In this paper, PtRu-C (60 % PtRu (3.5nm) on High Surface Area Carbon, Pt:Ru = 1:1, SCI Materials Hub), an alkaline dispersion (PiperION-A5-HCO3-EtOH, 5 wt.%, SCI Materials Hub), anion exchange membrane (PiperION-A type-HCO3, SCI Materials Hub) were used as received.


4. Green Chemistry Low Cell Voltage Electrosynthesis of Hydrogen Peroxide

The proton exchange membranes (Nafion-117, 211, and 212) were from SCI Materials Hub. They were pre-treated by 5 v/v% H2O2 solution for 1 h at 80°C and then treated by 10 v/v% H2SO4 aqueous solution for 1 h at 80°C before assembling to flow cell reactor.


5. Chemosphere Sustainable H2O2 production in a floating dual-cathode electro-Fenton system for efficient decontamination of organic pollutants

Ketogen black (EC-600JD) was purchased from SCI Materials Hub.


6. Journal of Materials Science Carbon dot intercalated MXene with an excellent oxygen reduction reaction electrocatalytic performance

Nafion (5 wt%) was purchased from SCI Materials Hub (Nafion D520).


7. Nature Commuinications Precisely designing asymmetrical selenium-based dual-atom sites for efficient oxygen reduction

Vulcan XC-72R carbon black (CAS No.: 1333-86-4, SCI Materials Hub).


8. ChemElectroChem Balancing the Aggregation of Cobalt Phthalocyanine on Carbon Nanohorn for Efficient H2O2 electrosynthesis in Neutral Electrolyte

AvCarb GDS 2230 substrates and Nafion 1110 membranes were purchased from Sci Materials hub.


9. Small Science Electrosynthesis of Hydrogen Peroxide at Industrial-Level Current Density in Flow-Cell System: Interfacial Microenvironment Regulation and Catalyst Design

Nafion solution (D520, 5 wt%) and proton exchange membrane (PEM, Nafion N117) were purchased from Sci Materials Hub.


10. Fuel Laser direct writing of graphene-encapsulated MoNi4 nanoparticles on carbon cloth as a self-supporting electrode for enhanced electrochemical urea oxidation

Carbon cloth (W0S1011) was purchased from SCI Materials Hub.


11. Nature Portfolio Carbon defects enhanced TEMPO redox cycles for high-efficiency urotropine electrosynthesis

TGPH060H hydrophilic carbon paper (CP), VXC-72 carbon black (CB), nickel foam, Nafion D520 dispersion, Nafion N117, and Fumasep FAA-3-PK-75 were gained from SCI Materials Hub.


12. American Institute of Chemical Engineers A tandem electro-thermocatalysis platform for practical hydrogen peroxide-mediated oxygenation reactions at high rates

Sustainion ionomerbinder solution and anion-exchange membrane (AEM, SustainionX37-50 grade 60) was purchased from SCI Materials Hub.


13. Journal of Environmental Chemical Engineering Metal-free heterogeneous electro-Fenton with solid polymer electrolytes: A novel self-supporting system for PPCPs decontamination

Industrial-grade graphite felt (GF) and solid polymer electrolytes (Nafion®N324, N438, N117, and N115) were procured from SCI Materials Hub.


14. Physical Chemistry Chemical Physics Tailoring LaBO3 (B = Mn, Fe, Co, Ni) perovskite oxides for methanol-tolerant oxygen reduction reaction electrocatalysts
Nafion D520 dispersion (5 wt%) was obtained from SCI Materials Hub.


15. Nano Research Surface diffusion-Limited dealloying: A strategy for porosityconstruction in small-sized alloy nanoparticle electrocatalysts
Commercial 20%Pt/C (TKK-TEC-10E20E) was obtained from SCl MaterialsHub.


电容器

1. Journal of Energy Storage Unraveling the detrimental crosstalk between cathode and anode in the aqueous asymmetric capacitor of activated carbon /copper oxide

In this paper, Fumasep FAA-3-50 anion exchange membrane (Thickness 50 μm, surface resistance 0.6–1.5 Ω cm−2, transference number 92–96 %) was bought from SCI Materials Hub.


2. Composites Science and Technology High modulus carbon fiber based composite structural supercapacitors towards reducing internal resistance and improving multifunctional performance

The aluminium tape (Wuhu Eryi Materials Co. LTD) were used as the current collectors.

Note: Wuhu Eryi Material Technology Co. is a company hold by SCI Materials Hub.


3. Polymer One-pot synthesis of hydroxypropyl methylcellulose-based gel polymer electrolytes for high-performance supercapacitors

Carbon cloth (CeTech W0S1011) was sourced from SCI Materials Hub.


4. ACS Applied Materials & Interfaces Green Polymer Derived Multifunctional Layer Achieving Oriented Diffusion and Controllable Deposition of Zn2+ for Ultra-Durable Zinc-Ion Hybrid Supercapacitors

Zn foil (99.99%) and Copper foil (99.99%) was purchased from SCI Materials Hub.


5. Journal of Water Process Engineering Enhanced electrodialysis by electric double-layer capacitors to minimize membrane use in digestate ammonia recovery: mechanisms and effects

Carbon cloth (W0S1011, >98 %), cation-exchange membrane (FKB-PK-130, with a thickness of 130 μm) were purchased from SCI Materials Hub.


6. ACS Applied Materials & Interfaces Mechano-Electrochemical Synergy of Lignin Cross-Linked PVA Gel Polymer Electrolytes for Wide-Temperature Flexible Supercapacitors

Raw carbon cloth (CeTech W0S1009) was acquired from SCI Materials Hub


催化加氢

1. Nature Communications Electrosynthesis of polymer-grade ethylene via acetylene semihydrogenation over undercoordinated Cu nanodots

In this paper, activated carbon (Vulcan XC-72) was obtained from SCI Materials Hub.


2. Applied Catalysis B: Environment and Energy Spatial-confined effect of CuOx microneedles bundles on TiO2 nanotubes: Reinforcing the adsorption and enrichment of ultralow concentration nitrate for efficient NH3 electrosynthesis

Ion membrane (Nafion N115, 127 μL) was purchased form Sci Materials Hub.


3. Nature Communications Electrosynthesis of NH3 from NO with ampere-level current density in a pressurized electrolyzer

The anion exchange membrane (Fumasep FAB-PK-130, 130 μm) was purchased from SCI Materials Hub.


4. Sustainable Energy Fuels Dibenzyl ether-guided microstructural regulation of PtIrZn catalysts for ammonia electrocatalysis


5. Chemical Engineering Journal Enhanced electrocatalytic nitrate reduction to ammonia via boron-doped copper foam

Ni foam was purchased from the Sci Materials Hub Co., Ltd. (Anhui, China).

6. Nature Communications Modulating Ru-Co bond lengths in Ru1Co single-atom alloys through crystal phase engineering for electrocatalytic nitrate-to-ammonia conversion

Nafion 211 membrane (diameter: 3 cm, thickness: 25.4 μm) was purchased from SCI Materials Hub.


7. Nature Communications Revealing and modulating catalyst reconstruction for highly efficient electrosynthesis of ammonia

Toray Carbon Paper (CP, TGP-H-060), Nafion 211 membrane, Nafion N117 membrane, and membrane electrode device were obtained from the Sci materials hu


8. Preparation of Ultra-Micropore-Rich Porous Carbon Materials Via Control of Dimension-Reduction Carbonization and Induction by Cascade Activation for High-Performance Supercapacitors

Hydrophilic carbon paper and carbon black, carbon rod electrode was purchased from SCI Materials HUB


9. Separation and Purification Technology A novel membrane-free ion enrichment electrolyzer recovers ammonia from digestate

Carbon cloth (W0S1011, >98 %), cation-exchange membrane (FKB-PK-130, with a thickness of 130  μm), and anion-exchange membrane (FAS-PET-130, with a thickness of 130  μm) were purchased from SCI Materials Hub.


水处理

1. Water Research Electro-peroxone with solid polymer electrolytes: A novel system for degradation of plasticizers in natural effluents

In this paper, Nafion® N324 (SCI Materials Hub), between a 15 cm2 (3 cm × 5 cm) graphite plate anode and a graphite felt cathode (EP-SPE system)


表征

1. Chemical Engineering Journal Electrochemical reconstitution of Prussian blue analogue for coupling furfural electro-oxidation with photo-assisted hydrogen evolution reaction

An Au nanoparticle film was deposited on the total reflecting plane of a single reflection ATR crystal (SCI Materials Hub, Wuhu, China) via sputter coater.


理论计算

1. Sustainable Energy & Fuels A desulfurization fuel cell with alkali and sulfuric acid byproducts: a prototype and a model

A Fumasep®FKD-PK-75 membrane was used as the cation exchange membrane, in which the the oxygen permeability of membrane was about 1 cm3(STP)/(s cm2 cm Hg) [Ref. SCI Materials Hub]


器件

1. Journal of Materials Science: Materials in Electronics Preparation and application of electrical conductive composites with skin temperature-triggered attachable and on-demand detachable adhesion

Carbon black (CB, Ketjenblack EC 600JD) was purchased from SCI Materials Hub.


2. Chemosphere Highly Sensitive Electrochemical Sensor for Lead Ion Based on Bi-Mof/Conducting Polymer Composites

Nafion D520 Dispersion (Alcohol based 1000 EW at 5wt%) was purchased from SCI Materials Hub.


3. ACS Nano High-Performance Graphdiyne Oxide/Au Nanoparticle Electrode for Electrochemical Non-enzymatic Glucose Sensor

Carbon cloth was purchased from SCI Materials Hub (CeTech W0S1011).


材料合成

1. Acta Materialia In situ epitaxial thickening of wafer-scale, highly oriented nanotwinned Ag on tailored polycrystalline Cu substrates

Single-crystal Cu (1 cm × 1 cm) substrates with a (111) orientation were purchased from SCI Materials Hub.


2. Journal of The Electrochemical Society One-Pot Electrodeposition of a PANI:PSS/MWCNT Nanocomposite on Carbon Paper for Scalable Determination of Ascorbic Acid

Raw carbon paper was purchased from SCI Materials Hub


3. Polymer Composites Constructing High-Performance Composite Bipolar Plates via Multidimensional Carbon Networks

KB (EC-600JD), Acetylene black (CB11), and Carbon black (XC-72) were purchased from SCI Materials Hub


催化降解

1. Journal of Environmental Chemical Engineering Conversion of CoNiFe-LDH to CoNiFe-MOF/LDH as catalyst for efficient heterogeneous electro-Fenton degradation of sulfonamide antibiotics

The hydrophobic microporous laminated carbon paper (HML-CP) (2 cm × 2.5 cm) was chosen as a cathode and fabricated by Wuhu Eryi Material Technology Co. (Anhui, China).

Note: Wuhu Eryi Material Technology Co. is a company hold by SCI Materials Hub.


2. Nature Communications Scale-up upcycling of waste polyethylene terephthalate plastics to biodegradable polyglycolic acid plastics

Nickle foam (NF) and Nafion N117 were obtained from SCI Materials Hub.


催化电解

1. Chemical Engineering Journal Modulation of energy barrier of reaction steps over S-doped Ni(OH)2/Cu composites to achieve high-performance urea electrolysis catalysts

Commercial Pt/C (20 wt%) was purchased from Wuhu Eryi Material Technology Co., LTD.

Note: Wuhu Eryi Material Technology Co. is a company hold by SCI Materials Hub.


2. Chemical Engineering Journal Efficient Catalysis for Acidic Methanol Oxidation: Exploration of a Low-Platinum Quaternary Alloy Catalyst Via a Two-Step Method

Nafion (5%) was purchased from SCI Materials Hub.


环 境

1. Journal of Materials Research and TechnologyTribocorrosion performance of TC4 anodized/carbon fiber composite in marine environment

Carbon fiber cloth WOS1011H(M) purchased from Wuhu Eryi Materials Technology Co.

Note: Wuhu Eryi Material Technology Co. is a company hold by SCI Materials Hub.


2. Adv. Funct. Mater. Modulating NFO@N-MWCNTs/CC Interfaces to Construct Multilevel Synergistic Sites (Ni/Fe-O-N-C) for Multi-Heavy Metal Ions Sensing

Carbon cloth (W0S1011) was acquired from SCI Materials Hub (www.scimaterials.cn).


热 电

1. Chemical Engineering Journal High power density charging-free thermally regenerative electrochemical flow cycle for low-temperature thermoelectric conversion

The heat exchangers are composed of 20 μm thick titanium foil (SCI Materials Hub), 1 mm thick rubber gasket and 2 cm thick organic glass from the inside to the outside.


其 它

1. Ceramics International Superhydrophobic carbon fiber composite coatings based on TC4 titanium alloy for improving corrosion resistance

Carbon fiber cloth was purchased from SCI Materials Hub.


2. Electrochimica Acta Integrated electrochemically assisted absorbers for the removal of Carbon dioxide

39 BB carbon paper was obtained from SCI Materials Hub.


3. Journal of Hazardous Materials Chain assembly of Rhodococcus bacteria with O-doped g-C3N4 for photocatalysis mediated high-performance partial nitrification: From nitrite resource evolution to device application

Fumasep FAA-3-PK-130, diameter 30 mm, was purchased from SCI Materials Hub.


4. Nature Communications High selectivity framework polymer membranes chemically tuned towards fast anion conduction

Sustainion® X37-50 Grade RT membrane was purchased from SCI Materials Hub, and was pretreated by soaking in 1 M KOH for 24 h according to a reported procedure.


5. Polymer Composites Constructing High-Performance Composite Bipolar Plates via Multidimensional Carbon Networks

KB (EC-600JD), Acetylene black (CB11), and Carbon black (XC-72) were purchased from SCI Materials Hub Co. Ltd. China.

相关产品

为科学研究提供来源广泛的材料
材料合成仪器装置及材料解决方案
备案号:皖ICP备2021011042号-1
关于我们
产品咨询
客服1
客服2
售后与技术咨询
客服1
客服2
微信客服

返回顶部