利用交错微电极放大材料与界面的电学响应
当液体、薄膜、气敏材料、生物识别层或介电材料 覆盖叉指区域后,两组电极之间的电阻、电容与阻抗 会随材料状态、浓度、湿度、吸附行为或化学反应发生变化, 从而实现高灵敏度检测。

采用高绝缘氧化铝陶瓷或高平整度硅片作为基底, 结合微米级线路加工与多层金属沉积工艺, 为电化学分析、阻抗测试、气体传感、生物芯片、 微流控集成及 MEMS 器件研究提供稳定、精密、 易于集成的微电极平台。
叉指电极由两组相互交错、彼此绝缘的梳齿状金属电极组成。 微米级交错线路能够在有限面积内增加有效边界长度, 形成集中且均匀的局部电场,从而提升阻抗、电容、 电导及界面反应检测的灵敏度。
当液体、薄膜、气敏材料、生物识别层或介电材料 覆盖叉指区域后,两组电极之间的电阻、电容与阻抗 会随材料状态、浓度、湿度、吸附行为或化学反应发生变化, 从而实现高灵敏度检测。
微米级间距缩短电场作用距离, 提升局部材料变化的检测能力。
较长的有效电极边界可增加样品与电极 之间的作用区域。
高一致性线路和稳定绝缘基底有助于获得 更清晰的测试信号。
可与微流道、功能涂层、封装电路及 MEMS 结构组合使用。
根据耐温性、绝缘性能、加工精度、半导体工艺兼容性 以及芯片集成方式,可选择氧化铝陶瓷基底或硅片基底。
采用高绝缘氧化铝陶瓷作为基底,通过精密薄膜沉积、 微细线路加工与多层金属电镀形成 IDE 结构。 具有耐温、耐酸碱、低介电损耗和尺寸稳定等特点, 适合复杂环境及长周期实验。
采用高平整度硅片作为基底,可兼容光刻、 薄膜沉积、微纳加工、MEMS 与半导体封装流程。 适合更细线宽、更复杂图形和芯片级阵列设计, 便于集成微流道、传感单元及电子结构。
典型产品采用 Au / Ni / Cu / Ti 多层金属体系, 分别承担抗氧化、阻挡过渡、主导电和附着增强功能。
典型厚度约 1 U,提供良好的导电性、 抗氧化能力和表面化学稳定性, 便于电化学修饰与生物分子固定。
典型厚度约 3 μm,可作为金与铜之间的过渡层, 降低金属扩散并增强多层结构稳定性。
典型厚度约 12 μm,提供主要电流传输通道, 适合形成叉指线路、焊盘和外部连接结构。
典型厚度约 0.1 μm,用于增强金属线路 与陶瓷或硅片表面的结合能力, 提升结构可靠性。
陶瓷基底更注重绝缘、耐温、低介电损耗和长期稳定性; 硅片基底更注重表面平整度、加工精度及 MEMS 工艺兼容性。
高绝缘、低损耗、耐温稳定
高平整度、微纳加工兼容
| 基底材料 | 高绝缘氧化铝 Al₂O₃ 陶瓷 | 单晶硅或指定类型硅片, 可配置绝缘层 |
|---|---|---|
| 典型耐温参考 | 约 -200℃~350℃ | 适合芯片级热处理与实验环境 |
| 绝缘性能 | 电阻率高、漏电流小, 基底绝缘稳定性较好 | 通常需结合氧化层或绝缘结构设计, 可适配半导体器件需求 |
| 介电损耗 | 低介电损耗, 典型 tanδ 可低于 0.001 | 与硅片类型、频率及绝缘层结构有关 |
| 导热性能 | 约 15~30 W/(m·K), 具有较好的散热能力 | 硅材料导热能力较好, 适合芯片级热管理研究 |
| 表面平整度 | 平整度良好, 适合常规微米级线路 | 表面平整度极高, 适合精细光刻与微纳加工 |
| 图形加工精度 | 适合 50 μm、100 μm 及常规微米级设计 | 适合更细线宽、 更高密度和复杂图形设计 |
| 化学稳定性 | 氧化铝陶瓷耐酸碱能力较强, 适合复杂实验环境 | 与表面氧化层、封装层和实验介质有关 |
| 机械性能 | 尺寸稳定,但属于脆性材料, 使用时需避免冲击 | 适合晶圆加工与芯片封装, 同样需避免弯折和碰撞 |
| 工艺兼容性 | 兼容薄膜沉积、电镀及常规微线路加工 | 高度兼容 MEMS、半导体、 光刻和微纳加工体系 |
| 典型应用 | 电化学、气体传感、 高频介电、长期阻抗测试 | MEMS、生物芯片、微流控、 光电及微纳器件开发 |
| 推荐场景 | 注重耐温、绝缘和长期稳定性 | 注重精度、集成和工艺兼容性 |
支持陶瓷和硅片基底、多种贵金属体系、 微米级线宽线距、不同叉指对数、阵列通道及特殊图形设计。
| 参数项目 | 常规方案 | 可定制内容 | 选型说明 |
|---|---|---|---|
| 基底类型 | 氧化铝陶瓷 / 硅片 | 陶瓷纯度、硅片类型及绝缘层 | 根据耐温、绝缘与工艺要求选择 |
| 外形尺寸 | 多种标准片尺寸 | 长宽、圆片、异形轮廓 | 根据夹具、流道和封装空间确定 |
| 线宽 | 50 μm、100 μm 等 | 支持更细或特殊组合设计 | 影响电阻、灵敏度与加工难度 |
| 线距 | 50 μm、100 μm 等 | 支持不等线宽线距设计 | 间距越小,局部电场越集中 |
| 叉指长度 | 按标准有效区域配置 | 支持指定指长 | 影响有效检测面积和边界长度 |
| 叉指对数 | 多组规格可选 | 对数、总指数和排列密度 | 影响电容、阻抗和信号响应 |
| 金属体系 | Au / Ni / Cu / Ti | Au、Pt、Ag、Cu 等体系 | 根据电位窗口和实验介质选择 |
| 典型厚度 | Au 1 U、Ni 3 μm、 Cu 12 μm、Ti 0.1 μm | 支持金属层厚度调整 | 影响导电、附着及耐久性能 |
| 通道形式 | 单通道 IDE | 双通道、多通道、阵列化设计 | 适合对照实验及多点同步检测 |
| 连接方式 | 焊盘、探针、夹持连接 | 引线、排线和专用接口 | 根据仪器与封装方式确定 |
| 特殊结构 | 标准矩形叉指 | 环形、弧形、阵列及微流道集成 | 可适配 MEMS、生物芯片和传感阵列 |
兼顾精密结构、信号稳定、基底绝缘、 表面抗氧化和微纳器件集成能力。
支持 50 μm、100 μm 及更高精度图形设计, 可根据灵敏度和有效面积要求调整线宽、线距与指长。
精密线路加工保证叉指排列规则、边界清晰, 有助于获得均匀电场与较高的测试重复性。
金表面层具有良好的抗氧化性和导电能力, 适合长期测试、电化学修饰与生物功能化。
陶瓷基底提供稳定绝缘与低介电损耗, 硅片基底则支持 MEMS、光刻和微流控集成。
可作为独立测试电极,也可与功能材料、 微流道、生物识别层、封装电路和微纳结构集成。
用于阻抗、电导、电容、 电极反应及界面过程分析。
与气敏、湿敏或多孔材料结合, 检测 VOC、湿度及气体吸附行为。
用于 DNA、蛋白质、生物分子 及电化学生物芯片研究。
适用于微波、高频材料、 介电常数和损耗特性研究。
与 Lab-on-a-chip 流道集成, 实现微量样品原位检测。
用于导电结构、转印工艺 及柔性器件原型研究。
适合微纳结构、芯片级传感器 和阵列器件开发。
用于薄膜、浆料、聚合物、 纳米材料及介电材料分析。
可根据实验温度、介质腐蚀性、绝缘要求、 图形精度和微纳工艺集成需求进行选择。
适合高温、耐腐蚀、低介电损耗及长周期测试, 尤其适用于电化学、气体传感与高频介电实验。
适合精细光刻、微纳传感、微流控、生物芯片、 光电器件和阵列化集成开发。
从应用需求、图形参数、基底材料到金属结构, 提供完整的定制设计与样品验证服务。
提供测试对象、介质、温度、 频率及检测方式。
确认陶瓷或硅片、 尺寸、厚度及绝缘层。
确认线宽、线距、指长、 对数、焊盘与阵列结构。
完成图纸确认、样品加工 与后续测试优化。
| 外形尺寸(指长) | 叉指对数 | 线宽/线距(um/um) | 基底 | 速卖通 | 亚马逊 SKU | 中文官网价格(¥) |
|---|---|---|---|---|---|---|
| 5*7mm | 7对 | 100/100 | 硅片基底 | 0507-7P-100W100S-SI | IDE-0507-7P-100W100S-SI | 267 |
| 5*7mm | 15对 | 50/50 | 硅片基底 | 0507-15P-50W50S-SI | IDE-0507-15P-50W50S-SI | 267 |
| 5*7mm | 20对 | 30/30 | 硅片基底 | 0507-20P-30W30S-SI | IDE-0507-20P-30W30S-SI | 267 |
| 5*7mm | 35对 | 20/20 | 硅片基底 | 0507-35P-20W20S-SI | IDE-0507-35P-20W20S-SI | 276 |
| 5*7mm | 75对 | 10/10 | 硅片基底 | 0507-75P-10W10S-SI | IDE-0507-75P-10W10S-SI | 324 |
| 5*7mm | 75对 | 100/100 | 硅片基底 | 0507-75P-100W100S-SI | IDE-0507-75P-100W100S-SI | 228 |
| 5*7mm | 120对 | 5/5 | 硅片基底 | 0507-120P-5W5S-SI | IDE-0507-120P-5W5S-SI | 468 |
| 5*7mm | 200对 | 2/2 | 硅片基底 | 0507-200P-2W2S-SI | IDE-0507-200P-2W2S-SI | 900 |
| 5*7mm | 200对 | 3/3 | 硅片基底 | 0507-200P-3W3S-SI | IDE-0507-200P-3W3S-SI | 612 |
| 5*8mm | 5对 | 100/100 | 硅片基底 | 0508-5P-100W100S-SI | IDE-0508-5P-100W100S-SI | 267 |
| 5*8mm | 15对 | 30/30 | 硅片基底 | 0508-15P-30W30S-SI | IDE-0508-15P-30W30S-SI | 267 |
| 5*8mm | 15对 | 50/50 | 硅片基底 | 0508-15P-50W50S-SI | IDE-0508-15P-50W50S-SI | 267 |
| 5*8mm | 15对 | 100/100 | 硅片基底 | 0508-15P-100W100S-SI | IDE-0508-15P-100W100S-SI | 228 |
| 5*8mm | 35对 | 20/20 | 硅片基底 | 0508-35P-20W20S-SI | IDE-0508-35P-20W20S-SI | 267 |
| 5*8mm | 75对 | 10/10 | 硅片基底 | 0508-75P-10W10S-SI | IDE-0508-75P-10W10S-SI | 276 |
| 5*8mm | 100对 | 5/5 | 硅片基底 | 0508-100P-5W5S-SI | IDE-0508-100P-5W5S-SI | 468 |
| 5*8mm | 150对 | 3/3 | 硅片基底 | 0508-150P-3W3S-SI | IDE-0508-150P-3W3S-SI | 612 |
| 5*8mm | 200对 | 2/2 | 硅片基底 | 0508-200P-2W2S-SI | IDE-0508-200P-2W2S-SI | 900 |
| 5*7mm | 8圈 | 30/30 | 硅片基底 | 0507-8T-30W30S-SI | IDE-0507-8T-30W30S-SI | 267 |
| 5*7mm | 40圈 | 10/10 | 硅片基底 | 0507-40T-10W10S-SI | IDE-0507-40T-10W10S-SI | 324 |
| 6*4mm | 25对 | 10/10 | 硅片基底 | 0604-25P-10-5PC-SI | IDE-0604-25P-10W10S-5PCS-SI | 1476 |
| 6*4mm | 25对 | 10/10 | 硅片基底 | 0604-25P-10-10PC-SI | IDE-0604-25P-10W10S-10PCS-SI | 2436 |
| 6*4mm | 25对 | 20/20 | 硅片基底 | 0604-25P-20-5PC-SI | IDE-0604-25P-20W20S-5PCS-SI | 1476 |
| 6*4mm | 25对 | 20/20 | 硅片基底 | 0604-25P-20-10PC-SI | IDE-0604-25P-20W20S-10PCS-SI | 2436 |
| 6*4mm | 25对 | 30/30 | 硅片基底 | 0604-25P-30-5PC-SI | IDE-0604-25P-30W30S-5PCS-SI | 1332 |
| 6*4mm | 25对 | 30/30 | 硅片基底 | 0604-25P-30-10PC-SI | IDE-0604-25P-30W30S-10PCS-SI | 2196 |
| 10*10mm | 15对 | 100/50 | 陶瓷基底 | 1010-15P-100W50S-CER | IDE-1010-15P-100W50S-CER | 130 |
| 10*20mm | 25对 | 100/50 | 陶瓷基底 | 1020-25P-100W50S-CER | IDE-1020-25P-100W50S-CER | 200 |
| 10*10mm | 15对 | 80/80 | 陶瓷基底 | 1010-15P-80-5PC-CER | IDE-1010-15P-80W80S-5PCS-CER | 440 |
| 10*10mm | 15对 | 80/80 | 陶瓷基底 | 1010-15P-80-10PC-CER | IDE-1010-15P-80W80S-10PCS-CER | 708 |
SCI MATERIALS HUB
科研选材,选科学材料站
材料规格清晰,应用文献可查
Supplier names in the literature include SCI Materials Hub, Wuhu Eryi Materials Technology (an SCI Materials Hub company), Owl Materials Technology (an SCI Materials Hub company), and Wuhu Maotouying Materials Technology (an SCI Materials Hub company).
没有符合当前筛选条件的文献。
With nickel foam supplied by Wuhu Owl Materials Technology (an SCI Materials Hub company), the team built a core–shell cobalt selenide–hydroxide electrode for supercapacitors.
The authors sourced nickel foam from SCI Materials Hub and used a hydrogen-bond-regulated interface to improve seawater oxidation and durability.
The experiments used Fumasep FAB-PK-130 membrane from SCI Materials Hub, and the authors developed a co-deposited PdCu catalyst for electrochemical semi-hydrogenation of alkynols.
With Nafion D520 dispersion supplied by SCI Materials Hub, the researchers made an interface-rich nickel–cobalt alloy by flash Joule heating for alkaline hydrogen evolution.
The experiments used Vulcan XC-72 carbon black from SCI Materials Hub, and the authors improved CO tolerance in methanol oxidation by decorating porous platinum nanorods with amorphous bismuth sulfide.
The authors improved CO₂ electroreduction selectivity with high-index copper facets in Ag–Cu tandem catalysts in experiments that used Nafion NR212 membrane from SCI Materials Hub.
The experiments used 0.3 mm nickel foam from Wuhu Owl Materials Technology (an SCI Materials Hub company), and the authors built a binder-free NiTe₂/CoTe₂ electrode for chloride removal by capacitive deionization.
The study used AvCarb MB30 gas diffusion layer from SCI Materials Hub, and the team improved proton-exchange membrane fuel cells with an ionomer that interacts with surface dipoles.
The researchers characterized the structure, hardness, and ion release of a zinc-modified titanium alloy, with zinc nanopowder (about 50 nm) supplied by SCI Materials Hub.
The authors sourced carbon cloth from SCI Materials Hub and developed a porous hydrogel that improves moisture-driven power generation.
The experiments used Sigracet 28BC carbon paper and Nafion D520 dispersion from SCI Materials Hub, and the authors identified how calcium deposits affect oxygen reduction during peroxide electrosynthesis in natural water.
With Toray TGP-H-060 carbon paper and Nafion NR211 membrane supplied by SCI Materials Hub, the researchers improved nitrate reduction by introducing isolated antimony sites that promote lattice-nitrogen participation.
The authors separated the effects of platinum surface functionalization on cathode kinetics and mass transport in experiments that used GORE-SELECT M788.12 membrane and AvCarb GDS3250 carbon paper from SCI Materials Hub.
The study used Ketjenblack EC-300J carbon black from SCI Materials Hub, and the team reduced Nafion-induced poisoning of Pt₃Co fuel-cell catalysts by adding cerium.
The researchers reversed hydrogen spillover by tuning oxygen vacancies to improve interfacial hydrogen transfer, with Toray TGP-H-060H hydrophilic carbon paper supplied by SCI Materials Hub.
The authors sourced PiperION A35 membrane from SCI Materials Hub and evaluated crown ether-based membranes for durable alkaline electrolysis under fluctuating power.
The researchers used stainless-steel current collectors from Wuhu Maotouying Materials Technology (an SCI Materials Hub company) and improved aqueous zinc-battery cycling by regulating stress in manganese-substituted VOPO₄.
The experiments used copper foam from SCI Materials Hub, and the authors used interfacial ligands to improve both activity and selectivity in alkynol semi-hydrogenation and deuteration.
With Sustainion XA-9 ionomer dispersion supplied by SCI Materials Hub, the researchers showed how dynamic coordination in zinc–phosphorus nanodomains affects CO₂ reduction.
The authors demonstrated hydrogen peroxide electrosynthesis with a resin-wafer reactor without an anion-exchange membrane in experiments that used Hesen HCP135 carbon paper, Accelerate IrO₂, BP2000 carbon black, Nafion N115 membrane, Nafion D520 dispersion, and Sustainion X37-50 Grade RT membrane from SCI Materials Hub.
The study used Nafion NR211 membrane, PiperION A20 membrane, Nafion D521 dispersion, PiperION A25-HCO₃ ionomer dispersion, wet-proofed Toray TGP-H-090 carbon paper, and stainless steel fiber paper from SCI Materials Hub, and the team showed how surface hydroxyl structure governs water dissociation in bipolar membranes.
The researchers demonstrated salt-free hydrogen peroxide electrosynthesis in neutral electrolyte with confined Co–N₄ sites, with AvCarb GDS2230 carbon paper supplied by SCI Materials Hub.
The authors sourced copper foam from SCI Materials Hub and engineered fluorine-induced defects in Cu₃P to improve chloride removal.
The experiments used Toray TGP-H-060H(S) hydrophilic carbon paper from SCI Materials Hub, and the authors improved hydrogen evolution by tuning electronic coupling between ruthenium nanoclusters and ReS₂ nanosheets.
With 99.99% magnesium foil (200 µm) supplied by SCI Materials Hub, the researchers evaluated how albumin and shear stress affect corrosion of polymer-coated magnesium under simulated physiological flow.
The authors evaluated the performance and economics of vanadium flow batteries for long-duration storage in experiments that used Nafion NR212 membrane from SCI Materials Hub.
The researchers used commercial cation-selective membranes from Owl Materials Technology (an SCI Materials Hub company) and evaluated edge-sulfonated graphene oxide membranes for osmotic power generation.
The study used Johnson Matthey 20 wt% Pt/C catalyst, TANAKA PtCo/C catalyst (46.9 wt% Pt), and Ketjenblack EC-300J carbon black from SCI Materials Hub, and the team improved phosphate tolerance in a low-platinum, high-temperature PEM fuel cell.
The researchers improved CO₂-to-n-propanol conversion by combining nanoconfinement with grain-boundary engineering, with Nafion N115 membrane supplied by SCI Materials Hub.
The authors sourced Nafion D520 dispersion from SCI Materials Hub and developed a cobalt phosphide catalyst supported on nitrogen-doped coconut-shell carbon for alkaline hydrogen evolution.
The experiments used Sustainion ionomer dispersion (5 wt%) and Fumion FAA-3 ionomer (10 wt%) from SCI Materials Hub, and the authors demonstrated peroxide production from natural seawater at industrially relevant current densities.
With Toray TGP-H-060M carbon paper supplied by SCI Materials Hub, the researchers adjusted the CO-to-hydrogen ratio of syngas with Cu–In–Ag electrodes.
The authors favored multicarbon products in CO₂ electroreduction with a CuLa bimetallic catalyst in experiments that used Nafion perfluorinated resin solution (5–5.4 wt%) from SCI Materials Hub.
The study used Fumasep FKS-30 membrane from SCI Materials Hub, and the team improved electroosmotic flow in microfluidic chips through microscale pumping.
The experiments used 5 wt% Nafion dispersion and commercial Nafion membrane from Wuhu Eryi Materials Technology (an SCI Materials Hub company), and the authors developed an amino acid-functionalized membrane with higher proton conductivity and lower methanol permeability.
The researchers developed an amorphous NiCoFeMo phosphide catalyst for durable oxygen evolution, with Toray TGP-H-060H hydrophilic carbon paper supplied by SCI Materials Hub.
The authors sourced Fumasep FAB-PK-130 membrane from SCI Materials Hub and clarified how ionic-liquid cations and anions jointly affect copper-catalyzed CO₂ electroreduction.
The experiments used 20 wt% Pd/C catalyst and 40 wt% Au/C catalyst from SCI Materials Hub, and the authors demonstrated selective formaldehyde upcycling in acid by electrochemically mediated disproportionation.
With 0.05 mm carbon felt supplied by Wuhu Eryi Materials Technology (an SCI Materials Hub company), the researchers developed a phosphorus-activated organic cathode for high-capacity, long-life iron batteries.
The authors combined a porous flow field and a modified transport layer to improve PEM water electrolysis in experiments that used 250 µm titanium felt from Wuhu Eryi Materials Technology (an SCI Materials Hub company).
The study used lead foil, tin foil, and bismuth foil from SCI Materials Hub, and the team demonstrated reversible aqueous electrochemistry for heavy p-block elements with a salting-in electrolyte.
The researchers demonstrated reversible multielectron ammonium storage in a covalent organic framework, with 0.05 mm carbon felt supplied by Wuhu Eryi Materials Technology (an SCI Materials Hub company).
The authors sourced Vulcan XC-72R carbon black from SCI Materials Hub and improved acidic oxygen reduction with an iron- and nitrogen-containing carbon layer on biochar.
The study used a PtRu/blank half-membrane and Fumasep FAA-3-PK-130 membrane from SCI Materials Hub and 1 mm nickel foam from Wuhu Eryi New Materials (an SCI Materials Hub company) to investigate chloride repulsion during seawater electrolysis.
With Vulcan XC-72 carbon black supplied by SCI Materials Hub, the researchers improved methanol electrooxidation with Pt₂Bi₂/Pt heterojunction nanorods.
The authors improved CO₂ electroreduction in pure water by engineering the membrane–electrode interface in experiments that used PiperION ionomer solution, Sustainion ionomer dispersion, and IrOₓ-coated titanium electrode from SCI Materials Hub.
The authors evaluated nickel dispersed on liquid gallium for electrochemical nitrate-to-ammonia conversion in experiments that used Nafion N117 membrane from Owl Materials Technology (an SCI Materials Hub company).
The team sourced Nafion N117 membrane from SCI Materials Hub and co-produced formate by coupling CO₂ reduction with oxidation of PET-derived ethylene glycol.
The researchers improved hydrogen evolution by promoting charge transfer and hydrogen spillover on a tungsten oxide-supported catalyst, with Vulcan XC-72 carbon black supplied by SCI Materials Hub.
The authors sourced hydrophobic carbon paper from SCI Materials Hub and improved nitrate-to-ammonia conversion with a trimetallic catalyst derived from a metal–organic framework.
The experiments used Sigracet 36BB carbon paper from SCI Materials Hub to evaluate a system that couples seawater desalination with CO₂ reduction to formate.
With 20 wt% Pt/C benchmark catalyst supplied by Wuhu Eryi Materials Technology (an SCI Materials Hub company), the researchers improved alkaline hydrogen evolution by modifying Co/Co(OH)₂ nanosheets with molybdate.
The authors produced methane from dilute CO₂ in neutral electrolyte using densely spaced copper sites in experiments that used Nafion N117 membrane and Aquivion D79-25BS dispersion from SCI Materials Hub.
The study used 0.45 µm PTFE membrane from SCI Materials Hub, and the team used catalyst reconstruction to favor multicarbon products in CO₂ electroreduction.
The study used CeTech W0S1011 carbon cloth, Fumasep FKB-PK-130 membrane, and Fumasep FAS-PET-130 membrane from SCI Materials Hub and recovered ammonia from digestate with a membrane-free electrolyzer that concentrates ions.
The authors sourced nickel foam from SCI Materials Hub and identified silver-triggered Co⁴⁺ sites that promote electrocatalytic oxidation of alcohols to acids.
The experiments used AvCarb GDS2240 gas diffusion layer from SCI Materials Hub, and the authors controlled catalyst-site evolution through local hydrophobicity to improve CO₂ electroreduction.
With CeTech W0S1011 carbon cloth supplied by SCI Materials Hub, the researchers used laser writing to make a self-supporting MoNi₄–graphene electrode for enhanced urea oxidation.
The authors converted glycerol to propylene glycol at ampere-level current density in experiments that used Nafion N115 membrane from SCI Materials Hub.
The study used Toray TGP-H-060H hydrophilic carbon paper, Vulcan XC-72 carbon black, nickel foam, Nafion D520 dispersion, Nafion N117 membrane, and Fumasep FAA-3-PK-75 membrane from SCI Materials Hub, and the team used carbon defects to accelerate TEMPO redox cycling in urotropine electrosynthesis.
The researchers coupled electrocatalytic nitrophenol conversion with in situ product separation, with AvCarb G300A carbon felt supplied by SCI Materials Hub.
The authors sourced Nafion D520 dispersion from SCI Materials Hub and measured how nickel substitution in lanthanum cobaltite affects oxygen reduction.
The experiments used DiffuCarb CP-H200R carbon paper from SCI Materials Hub, and the authors tuned a Co₃O₄/CeO₂ interface to favor glycolic acid during glycerol oxidation.
The authors used a hydrogen-bond network to favor hydroxide transport over chloride during seawater splitting at 2.0 A cm⁻² in experiments that used 1 mm nickel foam from Wuhu Eryi New Materials (an SCI Materials Hub company).
With industrial-grade graphite felt, Nafion N324 membrane, Nafion N438 membrane, Nafion N117 membrane, and Nafion N115 membrane supplied by SCI Materials Hub, the researchers developed a metal-free solid-electrolyte electro-Fenton system for removing pharmaceutical and personal care pollutants.
The authors achieved over 98% Faradaic efficiency for CO at 500 mA cm⁻² with a nickel single-atom catalyst at pH 1 in experiments that used Nafion D520 dispersion, Nafion 212 membrane, Nafion N115 membrane, Sigracet 39BB gas diffusion electrode, and CO₂ humidifier from SCI Materials Hub.
With 1 mm nickel foam supplied by Wuhu Eryi New Materials (an SCI Materials Hub company), the team used borate-etched CoFe hydroxide to improve the stability of seawater electrolysis.
The study used Zirfon 220 separator and Zirfon 500 separator from SCI Materials Hub, and the team improved hydroxide conduction through two-dimensional hydrogen-bond networks.
The researchers developed a two-dimensional manganese–iridium oxide for oxygen evolution under acidic conditions, with Nafion NR212 membrane supplied by SCI Materials Hub.
The authors sourced nickel foam and nickel foil from SCI Materials Hub and improved glucose oxidation to formate by tuning the spin state of cobalt in nickel cobaltite.
The experiments used copper foam from SCI Materials Hub, and the authors coupled nitrate and CO₂ to produce urea with cobalt-doped palladium nanocrystals.
With CeTech W0S1009 carbon cloth supplied by SCI Materials Hub, the researchers cross-linked polyvinyl alcohol with lignin to make a flexible supercapacitor electrolyte for a broad temperature range.
The authors extended aqueous zinc-ion battery cycling with a separator made from bacterial cellulose and glass fiber in experiments that used 304 stainless steel foil from SCI Materials Hub.
The study used anion-exchange membrane water electrolyzer from Wuhu Eryi Materials Technology (an SCI Materials Hub company), and the team developed a metal–oxide heterojunction catalyst for anion-exchange membrane water electrolysis.
The researchers improved glucose sensing with a silver-nanowire and cobalt-oxide electrode, with CeTech W0S1011 carbon cloth supplied by SCI Materials Hub.
The authors sourced Sustainion XA-9 ionomer powder and PiperION A5 ionomer from SCI Materials Hub and clarified how ionomer–catalyst interactions enable efficient CO₂ electroreduction with pure water.
The experiments used carbon paper from SCI Materials Hub, and the authors anchored iridium within lanthanum-modified cobalt oxide for oxygen evolution with reduced iridium loading.
With Sigracet 39BB gas diffusion layer, Sustainion X37-50 Grade 60 membrane, and Sustainion XA-9 ionomer supplied by SCI Materials Hub, the researchers used oxide-derived silver to improve photovoltaic-driven CO₂ reduction in a membrane electrode assembly.
The authors stabilized the zinc anode of a zinc–iodine flow battery using a halide-rich electrolyte in experiments that used Nafion N115 membrane from SCI Materials Hub.
The study used nickel foam from SCI Materials Hub, and the team improved nitrate-to-ammonia conversion using boron-doped copper foam.
The researchers used Ketjenblack EC-300J carbon black from SCI Materials Hub and evaluated cobalt-doped RuIr nanoparticles for stable alkaline water splitting.
The researchers compared hydrogen evolution and durability in an alkaline test of foam electrodes for seawater electrolysis, with nickel–molybdenum foam, iron foam, nickel–iron foam, nickel foam, and platinum comparison electrode supplied by SCI Materials Hub.
The authors sourced BS01 operando battery pressure tester from SCI Materials Hub and engineered a carbon–zinc oxide host for lithium metal and tracked cell pressure during operation.
The experiments used nickel foam from SCI Materials Hub, and the authors deposited cobalt ferrite on nickel foam by aerosol-assisted chemical vapor deposition to improve oxygen evolution.
With Nafion D520 dispersion supplied by SCI Materials Hub, the researchers supported molybdenum carbide on nitrogen- and phosphorus-doped coconut-shell carbon for alkaline hydrogen evolution.
The authors used porous carbon-supported silver to improve mass transport during high-current CO₂-to-CO conversion in experiments that used Sigracet 39BB carbon paper, Sustainion X37-50 Grade T membrane, and nickel foam from SCI Materials Hub.
The study used Toray TGP-H-060 carbon paper, Nafion NR211 membrane, Nafion N117 membrane, and membrane electrode device from SCI Materials Hub, and the team controlled catalyst restructuring to improve ammonia electrosynthesis.
The researchers developed an electrolyte that disrupts two structures to enable practical cadmium-metal batteries, with Swagelok2E002 test cell, Swagelok3E2e test cell, Fueiceel BM03 battery test fixture, cadmium foil, zinc foil, and D-210C PTFE dispersion supplied by SCI Materials Hub.
The authors sourced CeTech W1S1011 carbon cloth from SCI Materials Hub and generated electricity from glycerol in a biofuel cell using galactose oxidase and bilirubin oxidase.
The experiments used Nafion NR211 membrane from SCI Materials Hub, and the authors tuned Ru–Co bond lengths through crystal-phase engineering to improve nitrate-to-ammonia conversion.
With CeTech W0S1011 carbon cloth supplied by SCI Materials Hub, the researchers built a nonenzymatic glucose sensor using graphdiyne oxide and gold nanoparticles.
The authors improved deuterated ammonia production by regulating the microenvironment of nitrate reduction in experiments that used hydrophilic carbon paper from SCI Materials Hub.
The study used Vulcan XC-72R carbon black, Sigracet 28BC carbon paper, and Fumasep FAA-3-50 membrane from SCI Materials Hub, and the team examined how to scale CO electrolysis for carbon-neutral chemical synthesis.
The researchers coupled electrochemical hydrogen peroxide production with catalytic oxygenation to achieve high reaction rates, with Sustainion ionomer binder and Sustainion X37-50 Grade 60 membrane supplied by SCI Materials Hub.
The authors sourced Nafion N117 membrane from SCI Materials Hub and improved propylene epoxidation with Ag₂O-modified MnO₂ and water as the oxygen source.
The experiments used Accelerate IrO₂ catalyst from SCI Materials Hub, and the authors measured and modeled hydrogen crossover in PEM water electrolysis at pressures up to 20 MPa.
With Vulcan XC-72R carbon black supplied by SCI Materials Hub, the researchers prepared ultrafine FePtCoNiRu high-entropy alloy particles for enhanced hydrogen evolution.
The authors combined cooperative Jahn–Teller distortion and long-range strain in a manganese oxide–graphene cathode for aqueous zinc-ion batteries in experiments that used zinc foil from SCI Materials Hub.
The study used Celgard 2400 separator from SCI Materials Hub, and the team built ion-conducting electrode interphases for a 4.7 V lithium-metal battery by regulating lithium-ion coordination.
The researchers used electric double-layer capacitors to reduce membrane use in electrodialytic ammonia recovery from digestate, with CeTech W0S1011 carbon cloth and Fumasep FKB-PK-130 membrane supplied by SCI Materials Hub.
The authors sourced Fueiceel BM03 battery test fixture from SCI Materials Hub and used alcohol molecules to control disorder in vanadium-based cathodes and improve rate performance and durability.
The experiments used 15 µm zinc foil from SCI Materials Hub, and the authors stabilized aqueous zinc-ion batteries with a localized eutectic electrolyte.
With Nafion D520 dispersion and Nafion N117 membrane supplied by SCI Materials Hub, the researchers demonstrated hydrogen peroxide electrosynthesis at an industrially relevant current density in a flow cell.
The authors built multidimensional carbon networks to improve composite bipolar plates in experiments that used Ketjenblack EC-600JD carbon black, CB11 acetylene black, and Vulcan XC-72 carbon black from SCI Materials Hub.
The study used Nafion N115 membrane from SCI Materials Hub, and the team stabilized zinc–iodine flow batteries by engineering anion-dominated solvation.
The researchers scaled up the conversion of waste PET into biodegradable polyglycolic acid plastic, with nickel foam and Nafion N117 membrane supplied by SCI Materials Hub.
The authors sourced nickel foam from Wuhu Eryi Materials Technology (an SCI Materials Hub company) and improved hydrogen production in a microbial electrolysis cell with a CoMo cathode.
The experiments used PiperION A15-HCO₃ membrane from SCI Materials Hub, and the authors used a hydrophobic ionomer to tune the electrode environment for efficient CO₂ electroreduction.
With Vulcan XC-72 carbon black, PTFE-treated Toray TGP-H-060 carbon paper, and Nafion N117 membrane supplied by SCI Materials Hub, the researchers improved CO₂-to-formate conversion with sulfur-modified bismuth oxyiodide.
The authors controlled cooling after Joule heating to improve oxygen evolution on high-entropy oxides in experiments that used carbon cloth from Wuhu Eryi Materials Technology (an SCI Materials Hub company).
The study used Nafion D520 dispersion from SCI Materials Hub, and the team used bromide mediation to synthesize ethylene carbonate from CO₂ and ethylene in a membrane-free cell.
The researchers chemically tuned a framework polymer membrane to improve anion transport and selectivity, with Sustainion X37-50 Grade RT membrane supplied by SCI Materials Hub.
With carbon paper supplied by Wuhu Owl Material Technology (an SCI Materials Hub company), the team improved acidic oxygen evolution on RuO₂ by tuning Ru–O bonding with cerium.
The authors sourced carbon-coated aluminum foil from SCI Materials Hub and constructed a graphene–nanotube–layered double hydroxide composite for lithium-ion batteries.
The experiments used Celazole PBI resin (MW 60,000) from SCI Materials Hub, and the authors developed lignin-derived cationic polymers for efficient high-temperature proton-exchange membrane fuel cells.
With Nafion D521 dispersion, 60 wt% PtRu/C catalyst, PiperION A5-HCO₃ ionomer, and PiperION A-type anion-exchange membrane supplied by SCI Materials Hub, the researchers directed cobalt coordination with alkali metals to form Co–N₄ sites in Co–N–C catalysts.
The authors reached 39.4% Faradaic efficiency for ethylene oxide using an Ag/SnO₂ interface that promotes ethylene activation and hydroxyl formation in experiments that used Fumion FAA anion-exchange resin and Fumasep FAA-3-50 membrane from SCI Materials Hub.
The study used zinc foil and 99.99% copper foil from SCI Materials Hub, and the team used a polymer-derived layer to direct zinc-ion diffusion and deposition in a hybrid supercapacitor.
The researchers integrated electrochemically assisted absorbers for CO₂ removal, with Sigracet 39BB carbon paper supplied by SCI Materials Hub.
The authors sourced AvCarb GDS 2230 and Nafion N1110 membrane from SCI Materials Hub and controlled cobalt phthalocyanine aggregation on carbon nanohorns to improve hydrogen peroxide production in neutral electrolyte.
The experiments used nickel foam from SCI Materials Hub, and the authors promoted oxygen evolution by inducing surface reconstruction in amorphous nickel boride.
With Spectracarb 2050A-1050 carbon paper supplied by SCI Materials Hub, the researchers improved hydrogen evolution by using cobalt doping to create low-valence rhodium sites.
The authors improved CO₂-to-formate conversion by restructuring bismuth under reaction conditions in experiments that used Fumasep FAA-3-50 membrane from SCI Materials Hub.
The study used Fumasep FAB-PK-130 membrane from SCI Materials Hub, and the team demonstrated ammonia electrosynthesis from nitric oxide at ampere-level current density in a pressurized cell.
The researchers used confined CuOₓ sites on titanium dioxide nanotubes to enrich dilute nitrate for ammonia synthesis, with Nafion N115 membrane supplied by SCI Materials Hub.
The authors sourced Fumasep FAA-3-PK-130 membrane from SCI Materials Hub and combined Rhodococcus with oxygen-doped carbon nitride to achieve photocatalytic partial nitrification.
The experiments used Celgard 2400 separator from SCI Materials Hub, and the authors designed a biodegradable gel electrolyte for high-rate, long-life sodium metal batteries.
With Nafion D520 dispersion, Nafion NR212 membrane, Nafion N115 membrane, Nafion N117 membrane, AvCarb GDS2230 carbon paper, and Spectracarb 2050A-1050 carbon paper supplied by SCI Materials Hub, the researchers demonstrated scalable neutral hydrogen peroxide electrosynthesis with Fe₃O₄ on nitrogen-doped carbon.
The authors combined boron doping and morphology control in flower-like CuO to improve CO₂ electroreduction in experiments that used Toray TGP-H-060 carbon paper, Nafion D520 dispersion, and Nafion N117 membrane from SCI Materials Hub.
The study used Fumasep FAA-3-20 membrane from SCI Materials Hub, and the team loosened hydrophobic regions to promote ion-channel formation in fuel-cell anion-exchange membranes.
The researchers constructed a hierarchical oxygen evolution electrode with NiFe hydroxide and nitrogen-doped cobalt on nickel foam, with commercial PtRu/C catalyst and commercial RuO₂ catalyst supplied by SCI Materials Hub.
The authors sourced nickel foam from SCI Materials Hub and prepared a high-activity oxygen evolution electrode by depositing iron, nickel, and vanadium oxides on nickel foam.
The experiments used Vulcan XC-72R carbon black from SCI Materials Hub, and the authors designed asymmetric selenium-based dual-atom sites for efficient oxygen reduction.
With Nafion N117 membrane supplied by SCI Materials Hub, the researchers improved zinc–manganese flow battery stability and energy density by controlling cations during MnO₂ reduction.
The authors demonstrated nickel phosphide as a non-noble cathode catalyst for hydrogen isotope separation in experiments that used nickel supported on Vulcan XC-72 from SCI Materials Hub.
The study used 5 wt% Pt/C catalyst, 10 wt% Pt/C catalyst, Ketjenblack EC-300J carbon black, GORE ePTFE-reinforced proton-exchange membrane, and gas diffusion layer from SCI Materials Hub, and the team showed that contact uniformity has a greater impact on fuel cells with low catalyst loading.
The researchers improved the oxygen evolution activity and stability of NiFe hydroxides by doping them with gallium, with nickel foam supplied by SCI Materials Hub.
The authors sourced Nafion N117 membrane from Wuhu Eryi Materials Technology (an SCI Materials Hub company) and prepared 5N-purity copper from an impurity-rich anode in one electrorefining step.
The experiments used Fumasep FAA-3-PK-75 membrane from SCI Materials Hub, and the authors demonstrated continuous electrochemical CO₂ capture with decoupled redox steps.
With Nafion D520 dispersion supplied by SCI Materials Hub, the researchers built a sensitive electrochemical lead-ion sensor from a bismuth MOF and conductive polymer composite.
The authors used a conductive metal–organic framework coating on the separator to suppress polysulfide shuttling and improve redox conversion in experiments that used Ketjenblack carbon black from SCI Materials Hub.
The study used carbon fiber cloth from SCI Materials Hub, and the team improved the corrosion resistance of TC4 titanium alloy with a superhydrophobic carbon-fiber composite coating.
The researchers coupled a formaldehyde–polyoxometalate battery with a two-step approach to hydrogen production, with copper foam supplied by SCI Materials Hub.
The authors sourced single-cell alkaline water electrolyzer from SCI Materials Hub and demonstrated more than 1,000 hours of high-rate alkaline electrolysis with a thin PVA-coated Zirfon-type separator.
The experiments used Ketjenblack EC-600JD carbon black from SCI Materials Hub, and the authors examined how manganese doping changes the electronic structure and electrocatalytic properties of SrCoO₃.
With CeTech W0S1011 carbon cloth supplied by SCI Materials Hub, the researchers prepared a hydroxypropyl methylcellulose gel electrolyte in one step for high-performance supercapacitors.
The authors developed an iron–molybdenum biochar cathode for long-lived zinc–air batteries in experiments that used Vulcan XC-72R carbon black from SCI Materials Hub.
The study used Sigracet 22BB carbon paper from SCI Materials Hub, and the team accelerated air-cathode reactions in neutral zinc–air batteries using photothermal heating.
The researchers examined how electrode substrate and sputtered copper thickness affect multicarbon selectivity in CO₂ reduction, with Sigracet 36BB carbon paper supplied by SCI Materials Hub.
The authors sourced CeTech W0S1011 carbon cloth from SCI Materials Hub and engineered multilevel nickel and iron sites on a carbon-cloth electrode for sensing multiple heavy metals.
The experiments used Nafion NR212 membrane and PiperION A20 membrane from SCI Materials Hub, and the authors identified the oxygen-containing groups on graphene oxide that accelerate water dissociation.
With nickel–iron foam supplied by SCI Materials Hub, the researchers engineered amorphous–crystalline NiFe layered hydroxide structures for high-current oxygen evolution.
The authors demonstrated redox-mediated separation of hydrogen production from direct seawater splitting in experiments that used nickel foam, 20 wt% Pt/C catalyst, Fumasep FAA-3-PK-75 membrane, graphite felt, and alkaline water electrolyzers from SCI Materials Hub.
The study used 20 µm titanium foil from SCI Materials Hub, and the team developed a charging-free electrochemical flow cycle for low-temperature thermoelectric conversion.
The researchers used reconstructed dual active sites in gelatin-derived nitrogen-doped porous carbon for efficient overall water splitting, with Nafion D521 dispersion supplied by SCI Materials Hub.
The authors sourced CeTech W0S1011H(M) carbon fiber cloth from Wuhu Eryi Materials Technology (an SCI Materials Hub company) and evaluated the wear and corrosion of anodized TC4 and carbon fiber composites in a marine environment.
The experiments used Vulcan XC-72R carbon black and PTFE-treated Toray TGP-H-060 carbon paper from SCI Materials Hub, and the authors achieved over 90% Faradaic efficiency for cyclohexanone oxime with a Cu–Mo dual-site catalyst.
With AvCarb G650A graphite felt supplied by SCI Materials Hub, the researchers demonstrated a membrane-free, biphasic zinc–iodine battery with high volumetric capacity.
The authors improved anion-exchange membrane electrolysis by modifying the carbon-paper diffusion layer in experiments that used nickel–iron foam from SCI Materials Hub.
The study used Toray TGP-H-060 carbon paper, Nafion D520 dispersion, and Nafion N117 membrane from SCI Materials Hub, and the team combined CuO with oxygen-deficient ceria nanospheres to improve CO₂ electroreduction.
The researchers improved photocatalytic hydrogen evolution by adding an AgCo cocatalyst to graphitic carbon nitride, with Nafion D520 dispersion supplied by SCI Materials Hub.
The authors sourced Nafion D520 dispersion from SCI Materials Hub and improved oxygen reduction catalysis by inserting carbon dots between MXene layers.
The experiments used Ketjenblack EC-600JD carbon black from SCI Materials Hub, and the authors generated hydrogen peroxide in a floating dual-cathode electro-Fenton system for removing organic pollutants.
With Fumasep FAAM-20 supplied by SCI Materials Hub, the researchers designed ruthenium on titanium nitride for efficient, stable alkaline hydrogen evolution.
The authors used a two-step synthesis to develop a low-platinum quaternary alloy for acidic methanol oxidation in experiments that used 5 wt% Nafion solution from SCI Materials Hub.
The study used aluminum tape current collectors from Wuhu Eryi Materials Technology (an SCI Materials Hub company), and the team used high-modulus carbon fibers to reduce internal resistance in structural supercapacitors.
The researchers identified a Cu⁰/Cu⁺/Cu⁰ interface that favors multicarbon products during CO₂ reduction at neutral pH, with Sustainion X37-50 Grade RT membrane and CRRMEA1a MEA electrolyzer supplied by SCI Materials Hub.
The authors sourced IrO₂ catalyst, 40 wt% Pt/C catalyst, Sustainion X37-50 Grade 60 membrane, and carbon fiber cloth from SCI Materials Hub and used flexible tungsten disulfide structures to improve hydrogen evolution in an anion-exchange membrane electrolyzer.
The experiments used CRRMEA1a 1cm2 MEA electrolyzer from SCI Materials Hub, and the authors used compressive strain in copper catalysts to favor multicarbon products during CO₂ electroreduction.
With 20 wt% Pt/C catalyst supplied by Wuhu Eryi Materials Technology (an SCI Materials Hub company), the researchers tuned reaction energy barriers in sulfur-doped nickel hydroxide on copper for efficient urea electrolysis.
The authors used electric-field-assisted corrosion to grow NiFe hydroxide nanosheets for high-rate oxygen evolution in experiments that used nickel–iron foam from SCI Materials Hub.
The study used Toray TGP-H-060 carbon paper from SCI Materials Hub, and the team improved oxygen evolution with oxygen-vacancy-rich amorphous transition-metal oxides.
The researchers used molten salt to form isolated metal sites for selective CO₂ reduction, with Nafion D520 dispersion and Sigracet 39BB carbon paper supplied by SCI Materials Hub.
The authors sourced commercial Nafion proton-exchange membrane from SCI Materials Hub and compared nylon cloth with a commercial membrane as a separator for microbial methane production.
The experiments used raw carbon paper from SCI Materials Hub, and the authors used one-step electrodeposition of a polymer–nanotube composite on carbon paper for scalable ascorbic acid detection.
With zinc sheet and Whatman GF/D glass fiber supplied by SCI Materials Hub, the researchers improved the structural stability of δ-MnO₂ in aqueous zinc-ion batteries by introducing chromium.
The authors demonstrated ampere-level CO₂ reduction across a range of pH values using doped bismuth sulfide in experiments that used CRRMEA1a 1cm2 MEA electrolyzer from SCI Materials Hub.
The authors developed a boron-doped graphene oxide cathode for toxicity detection in microbial fuel cells in experiments that used carbon black and CeTech W0S1011 carbon cloth from Wuhu Owl Material Technology (an SCI Materials Hub company).
The study used CeTech GDS250 carbon paper from SCI Materials Hub, and the team mapped hydrogen evolution activity across vanadium-based A15 superconducting alloys.
The researchers used silver-decorated CuO nanospheres to modify the reaction environment and promote carbon–carbon coupling, with Nafion D520 dispersion and Nafion N115 membrane supplied by SCI Materials Hub.
The authors sourced 5 wt% Nafion solution from SCI Materials Hub and evaluated boride-doped Pd–Ni/C catalysts for more active methanol oxidation.
The experiments used PiperION anion-exchange membrane from SCI Materials Hub, and the authors produced formate concurrently by coupling CO₂ reduction with glucose oxidation.
With single-crystal copper substrate supplied by SCI Materials Hub, the researchers grew wafer-scale, highly oriented nanotwinned silver on tailored copper substrates.
The authors tuned the reaction environment and in situ restructuring of copper catalysts for selective, stable production of multicarbon compounds in experiments that used CRRMEA5a from SCI Materials Hub.
The study used PSC2000 PEM electrolyzer stack from SCI Materials Hub, and the team evaluated treated wastewater as a feedstock for PEM hydrogen production.
The researchers used vanadium mediation to improve the areal capacity of a zinc–manganese flow battery, with zinc sheet, copper foam, and Ketjenblack EC-600JD carbon black supplied by SCI Materials Hub.
The authors sourced Toray TGP-H-060 carbon paper from SCI Materials Hub and developed an iridium–yttrium alloy catalyst for efficient acidic water electrolysis.
The experiments used GORE-SELECT M788.12 membrane and Fumasep FKB-PK-130 membrane from SCI Materials Hub, and the authors demonstrated continuous hydrogen production from seawater in a dual-cation-exchange membrane electrolyzer.
With PiperION A20 and Nafion N117 membrane supplied by SCI Materials Hub, the researchers made nanoporous bismuth by dealloying to improve CO₂ reduction to formic acid.
The authors controlled adjacent Cu and Cu₂O sites to favor hydrocarbon formation from CO₂ in experiments that used Nafion and Toray TGP-H-060 carbon paper from SCI Materials Hub.
The study used hydrophobic microporous laminated carbon paper (HML-CP) from Wuhu Eryi Materials Technology (an SCI Materials Hub company), and the team converted a mixed-metal hydroxide into a MOF/hydroxide catalyst for electro-Fenton degradation of sulfonamide antibiotics.
The researchers demonstrated hydrogen peroxide electrosynthesis at a low cell voltage, with Nafion N117 membrane, Nafion NR211 membrane, and Nafion NR212 membrane supplied by SCI Materials Hub.
The authors sourced 5 wt% Nafion solution from SCI Materials Hub and used CO spillover between ZnO and CuO to promote carbon–carbon coupling during CO₂ reduction.
The experiments used Fumasep FAA-3-20 membrane from SCI Materials Hub, and the authors used rigid spiro units to promote phase separation in an anion-exchange membrane.
With 20 wt% Pt/C catalyst supplied by Wuhu Eryi Materials Technology (an SCI Materials Hub company), the researchers tuned the electronic structure of Ni₄Mo/Cu to promote nonacidic hydrogen evolution.
The authors used a nanoporous polymer additive to form a protective interphase on a high-voltage LiCoO₂ cathode in experiments that used 16 µm carbon-coated aluminum foil from SCI Materials Hub.
The study used carbon cloth substrate from SCI Materials Hub, and the team improved water splitting by engineering interfaces among NiFe LDH, NiS₂, and VS₂.
The researchers demonstrated an aqueous alkaline zinc–sulfur flow battery, with Nafion N115 membrane supplied by SCI Materials Hub.
The authors sourced CeTech W0S1011 carbon cloth from SCI Materials Hub and developed a vanadium oxide cathode for aqueous zinc-ion batteries by engineering its morphology and defects.
The experiments used Fumasep FAA-3-50 membrane from SCI Materials Hub, and the authors identified detrimental interactions between activated-carbon and copper-oxide electrodes in an aqueous capacitor.
With CeTech W0S1009 carbon cloth supplied by SCI Materials Hub, the researchers improved hydrogen evolution across a wide pH range by decorating VS₂ with ruthenium.
The authors raised peak fuel-cell power density above 1.2 W cm⁻² by adding acid-based polymer layers to the catalyst layers in experiments that used Celazole PBI resin (MW 60,000), Sigracet 39BB carbon paper, and TANAKA 70 wt% Pt/C catalyst from SCI Materials Hub.
The study used 20 wt% Pt₃M alloy catalysts (M = Cr, Co, Cu, Pd, Sn, and Ir) from SCI Materials Hub, and the team combined modeling and experiments to explain how alloy electronic structure and interfacial electric fields affect oxygen reduction.
The researchers developed conductive composites that adhere at skin temperature and can be detached on demand, with Ketjenblack EC-600JD carbon black supplied by SCI Materials Hub.
The authors sourced Nafion N117 membrane from SCI Materials Hub and improved the utilization of nickel single atoms in CO₂ electroreduction with an interconnected network of nitrogen-doped carbon tubes.
The experiments used Ketjenblack carbon black from SCI Materials Hub, and the authors improved zinc plating and stripping reversibility by controlling charge density at the anode–electrolyte interface.
With copper foam supplied by SCI Materials Hub, the researchers tuned spinel-oxide valence through double exchange to improve oxygen evolution.
The authors developed an axially coordinated cobalt-phthalocyanine polymer as a bifunctional zinc–air cathode catalyst in experiments that used CeTech W0S1011 carbon cloth from SCI Materials Hub.
The study used nickel foam from SCI Materials Hub, and the team used dysprosium oxysulfide to withdraw electrons from the catalyst and promote oxygen evolution.
The researchers tuned copper oxidation states in MOF-derived catalysts to favor hydrocarbons in CO₂ electroreduction, with Nafion N117 membrane, Nafion D520 dispersion, and Toray TGP-H-060 carbon paper supplied by SCI Materials Hub.
The authors sourced Fumasep FAA-3-PK-130 membrane from SCI Materials Hub and developed crystalline–amorphous MoNi/NiMoOₓ interfaces for hydrogen evolution at industrially relevant rates.
The experiments used 0.35 mm porous fiber felts from SCI Materials Hub, and the authors improved the activity and durability of a RuO₂ anode for PEM water electrolysis by adding silver.
With single-reflection ATR crystal supplied by SCI Materials Hub, the researchers reconstructed a Prussian blue analogue to couple furfural oxidation with photo-assisted hydrogen evolution.
The authors improved mass transport for CO₂ electroreduction by confining the ionomer within the catalyst layer in experiments that used PiperION A5 ionomer, Fumion FAA anion-exchange resin, PiperION A15-HCO₃ membrane, and Fumasep FAA-3-50 membrane from SCI Materials Hub.
The study used Fumasep FAB-PK-130 membrane from SCI Materials Hub, and the team integrated confined molecular catalysts into gas diffusion electrodes for high-current CO₂ electroreduction.
The researchers demonstrated a rechargeable zinc–copper battery that uses chloride shuttling across a biphasic electrolyte, with CeTech W0S1011 carbon cloth, Celgard 2300 separator, Whatman GF/A glass fiber, Fumasep FAB-PK-130 membrane, and Nafion N117 membrane supplied by SCI Materials Hub.
The authors sourced carbon-paper gas diffusion electrode with 60% Pt/C from SCI Materials Hub and developed a mechanically reinforced proton-exchange membrane thinner than two micrometers.
The experiments used Vulcan XC-72 carbon black from SCI Materials Hub, and the authors used undercoordinated copper nanodots to produce polymer-grade ethylene from acetylene.
With Vulcan XC-72 carbon black, Nafion N115 membrane, Nafion D520 dispersion, AvCarb GDS 2230, and Spectracarb 2050A-1050 carbon paper supplied by SCI Materials Hub, the researchers improved acidic hydrogen peroxide electrosynthesis by placing epoxy groups next to cobalt active sites.
The authors favored ethylene production in CO₂ electroreduction by controlling grain boundaries in copper(I) oxide in experiments that used Toray TGP-H-060 carbon paper, Nafion D520 dispersion, and Nafion N117 membrane from Wuhu Eryi Materials Technology (an SCI Materials Hub company).
The study used zinc foil from SCI Materials Hub, and the team used amphoteric glycine to tune interfacial chemistry and improve zinc anode reversibility.
The researchers extended zinc–manganese dioxide battery life using a hydrophobic ion-conducting membrane, with zinc foil, carbon paper, and carbon felt supplied by SCI Materials Hub.
The authors sourced Sustainion X37-50 Grade RT from SCI Materials Hub and converted CO₂ to CO at low overpotential with partially nitrided nickel nanoclusters.
The experiments used Nafion D520 dispersion and CeTech GDL340 carbon paper from SCI Materials Hub, and the authors built a rechargeable aqueous zinc–air battery using a heterogeneous MoS₂ cathode catalyst.
With Toray TGP-H-060 carbon paper supplied by SCI Materials Hub, the researchers achieved 74.4% capacity retention after 500 cycles with a composite lithium anode in an NCA full cell, versus 34.4% with bare lithium.
The authors demonstrated gold as an effective cathode catalyst for hydrogen isotope separation in PEM water electrolysis in experiments that used 20 wt% Pt/C catalyst and 20 wt% Au/C catalyst from SCI Materials Hub.
The study used Fumasep FAB-PK-130 membrane, Nafion N117 membrane, CeTech GDL340, Sigracet 39BC, Nafion D520 dispersion, zinc foil, zinc powder, 20% and 40% Pt/C catalysts, and IrO₂ catalyst from SCI Materials Hub, and the team developed a high-voltage zinc–air battery with a hydrophobic design that suppressed proton shuttling.
The researchers demonstrated a photo-assisted rechargeable battery for desalination, with carbon cloth supplied by SCI Materials Hub.
The authors sourced Fumion FAA-3-SOLUT-10 ionomer from SCI Materials Hub and developed a rigid poly(ether sulfone) anion-exchange membrane with multiple cyclic ammonium groups for fuel cells.
The experiments used Fumasep FBM bipolar membrane, Sigracet 29BC carbon paper, Freudenberg paper H23C2, Nafion N117 membrane, and Fumasep FAA-3-PK-130 membrane from SCI Materials Hub, and the authors showed how differences in electronegativity between neighboring atoms affect CO₂ reduction selectivity.
With Nafion N324 membrane supplied by SCI Materials Hub, the researchers developed an electro-peroxone system with a solid polymer electrolyte to degrade plasticizers in natural waters.
The authors improved aqueous zinc-ion battery cycling with a nanofibrous coating on a manganese oxide cathode in experiments that used stainless steel foil and zinc foil from SCI Materials Hub.
The study used Fumasep FAA-3-50 membrane from SCI Materials Hub, and the team used isolated ruthenium atoms on tungsten trioxide to couple hydrazine oxidation with hydrogen evolution across a wide pH range.
The researchers used strain relaxation in nickel alloys to reach 96.6% Faradaic efficiency for CO in CO₂ reduction, with Fumasep FBM bipolar membrane supplied by SCI Materials Hub.
The authors sourced Vulcan XC-72R carbon black from SCI Materials Hub and improved electrochemical CO₂ reduction with atomically dispersed nickel sites.
The experiments used Fumasep FAA-3-50 membrane from SCI Materials Hub, and the authors identified the roles of isolated ruthenium sites in water dissociation and hydrazine dehydrogenation during alkaline hydrogen production.
With 20 wt% Pt/C catalyst supplied by SCI Materials Hub, the researchers enhanced hydrogen evolution through interfaces between amorphous nickel–molybdenum oxides and crystalline copper.
The authors compared functionalized nanotube–polyaniline cathodes for zinc-based energy storage in experiments that used carbon nanotubes from SCI Materials Hub.
The study used zinc foil from SCI Materials Hub, and the team used a hybrid aqueous–organic electrolyte to suppress zinc dendrites and corrosion.
|
为科学研究提供来源广泛的材料 材料合成仪器装置及材料解决方案 备案号:皖ICP备2021011042号-1 |
关于我们 |


